Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit gets rid of the 'option env="ENV_VAR"' bounce symbols.
"$FOO" now expands directly to the value of the environment variable
FOO, instead of to the value of the Kconfig symbol FOO.
This change is likely to soon appear in the C tools as well. Those
'option env' symbols always seemed kinda pointless, and have broken
dependency handling due to forcing symbol evaluation during parsing,
before all the symbols have even been seen.
Compatibility with the C tools could be retained by naming all
'option env' symbols the same as the environment variable they
reference.
This commit also updated the Zephyr documentation to explain the new
behavior. It's relevant for $ZEPHYR_BASE and out-of-tree Kconfig
extensions.
Commit message from Kconfiglib (cbf32e29a130d)
==============================================
Make "$FOO" directly reference the environment variable $FOO in e.g.
'source' statements, instead of the symbol FOO. Use os.path.expandvars()
to expand strings (which preserves "$FOO" as-is if no environment
variable FOO exists).
This gets rid of the 'option env' "bounce" symbols, which are mostly
just spam and are buggy in the C tools (dependencies aren't always
respected, due to parsing and evaluation getting mixed up). The same
change will probably appear soon in the C tools as well.
Keep accepting 'option env' to preserve some backwards compatibility,
but ignore it when expanding strings. For compatibility with the C
tools, bounce symbols will need to be named the same as the environment
variables they reference (which is the case for the Linux kernel).
This is a compatibility break, so the major version will be bumped to 6
at the next release.
The main motivation for adding this now is to allow recording properties
on each MenuNode in a clean way. 'option env' symbols interact badly
with delayed dependency propagation.
Side note: I have a feeling that recording environment variable values
might be redundant to trigger rebuilds if sync_deps() is run at each
compile. It should detect all changes to symbol values due to
environment variables changing value.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Until now, Zephyr has used a patched Kconfiglib that turns 'source' into
a globbing source (by replacing 'source' with 'gsource' at the token
level). There's two problems with this:
- The patch needs to be maintained separately
- Misspelled filenames are silently ignored, as they look like glob
patterns that don't match anything
Fix it as follows:
1. Replace all 'source' statements that use wildcards with 'gsource'
2. Remove the custom Kconfiglib patch so that 'source' no longer globs
The sed pattern '/source.*[*?]/s/source/gsource/' was run over all
Kconfig* files to do the replacement.
source's that use environment variables that might contain glob patterns
were manually changed to gsource.
Building the docs in doc/ is a good test, as doc/Makefile deliberately
sets the environment variables to glob up as many Kconfig files as
possible.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Remove a source statement that is referencing a file that does not
exist. Presumably net/Kconfig was re-organized without this path being
updated so this statement is effectively dead code.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When Kconfiglib was introduced it caused a significant performance
issue. This patch uses pruning to mitigate the performance issue.
The pruning exploits the fact that before the Kconfig database is
parsed we already know what ARCH and BOARD has been selected. So in
theory we could prune away all Kconfig sources that are not related to
the current ARCH or BOARD. In practice, it is only the Kconfig sources
in zephyr/arch/$ARCH and zephyr/board/$ARCH/ that are easy to prune.
Still, that is quite a few Kconfig sources. For qemu_x86 this patch
reduced the number of parsed Kconfig source files from 632 to
272. This pruning resulted in a incremental reconfiguration (time
cmake ..) speedup of 21% (0.56s to 0.46) and a clean build speedup of
4% (Using board qemu_x86 and sample hello_world).
Furthermore, it should be easier to maintain ARCH's and BOARD's
out-of-tree since the user now has a mechanism to redirect where
Kconfig sources are found. But this has not been explored.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This reverts commit 83edd615ca.
Causes the documentation build to fail on Kconfig parsing, needs fixing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable application specific configuration to be easily included
and manageable via Kconfig. Add sample.
Signed-off-by: Michał Kruszewski <mkru@protonmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Subsystems code will reside in subsys/ folder. This patch creates the
folder and moves FS code there.
Jira: ZEP-1120
Change-Id: If3b1bcb996c5fbd4056cd5d1920d41d29810d6b2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Introduce an architecture sorting of boards. This is to allow for
easier maintenance going forward as the number of boards grows. It
will be easier for any scripts to know the board/arch mapping without
having to maintain an explicit list of what boards are associated with
which arch. We can also do things like have architecture maintainers
cover reviews and branches for arch/${ARCH} and boards/${ARCH} going
forward.
Change-Id: I02e0a30292b31fad58fb5dfab2682ad1c5a7d5a7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This framework makes testing in most parts a lot easier, since it gives
an unified base to work with, removing a lot of unnecessary code from
tests. This framework currently features simple assertions and basic
mocking support. The framework works both with and without Zephyr
running, so it can be used for real unit testing.
Origin: Original
Change-Id: I8c5bf2e6b8d6656b6197ee91699b61e730c1cfe3
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The board defconfig is useless if it does not override what the SoC
sets. Boards can have different values than those set by the SoC.
Change-Id: Iab287c62986b20585b4df3e77bd973dbab50eea4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds the diskio interface for the FAT file system. This
revision uses RAM to emulate disk storage.
Origin: Original
Jira: ZEP-285
Change-Id: I7a30c8761d5ed9b564f1d1e08482c5ef199d7372
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
USB Device core layer is a hardware independent interface between USB
device controller driver and USB device class drivers or customer
applications. It's a port of the LPCUSB device stack.
Change-Id: I9371ffab7034d20953fec0525e72fbe9e094c931
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add missing Kconfig files and connections to expose Kconfig options
in ext/ directories. Fixup QMSI to only be exposed on platforms that
utilize it.
Change-Id: I6c6c5011b2bf2966f65aa8279dc594a244821956
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
tinycrypt was built using the lib- scripts without any real benefit. We
also had a wrong placement of the Kconfig files under misc/ and a Kconfig
file for Crypto that was never used before.
Change-Id: I82d5902d92e7c06e10a95f418d9ead3cbcabcce4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This will allow adding an application level Kconfig, for example
mainmenu "Zephyr Application"
config ZEPHYR_BASE
string
option env="ZEPHYR_BASE"
config APPLICATION_BASE
string
option env="PROJECT_BASE"
source "$ZEPHYR_BASE/Kconfig.zephyr"
config TESTME
bool "Test me"
default y
config BLAH
bool "blah"
default y
source "$APPLICATION_BASE/src/Kconfig"
In the application file, add the following for example:
KBUILD_KCONFIG := $(PWD)/Kconfig
export KBUILD_KCONFIG
Change-Id: I7b7a6daace5f589ddadab0f0de54b5adc1b8dc86
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ulf Magnusson