Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The context buffer pool was introduced to deal with TCP holding buffers
when 6LO may modify them, therefore it makes sense to have it enabled
by default when TCP and 6LO are enabled given that the code can deal
with NULL pool in case the application don't implement one.
Change-Id: I600ca31ab40c96ee27937c2e885e332b0cee4995
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Docs need a label at the top so we can use :ref:`labelname`
to create a link to that doc from other docs.
Change-Id: I46cd75d714449de806a85dde08756c8e190488dc
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
In order to simplify when 802.15.4 is selected on these samples, let's
setup the device through a common code.
For this to work, RFD is now the default.
Change-Id: I46590864442f77d83f681cc0e854c94344648856
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/SAMPLES/APP for name shortening. Applying the change where relevant.
Not only IP addresse will be available as samples settings there but
also IEEE 802.15.4 channel, pan_id, and more for instance.
Change-Id: I05dd24989bd0c804d9588092d67044a3e063bc88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The echo-server no longer uses multicast addresses itself,
so the multicast address setting can be removed from echo-client.
Change-Id: Ieab069849ced8a850ada6e6618d625695819be8e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are copied verbatim from the echo_server sample.
Change-Id: I56d1386144967177f889e12d4a173bfb6628f18b
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Bluetooth consumes buffer when transmitting them therefore any protocol
that need to retain them, like TCP, needs to have its own pool to copy
the buffers as they may need to be resent in case they are not acked.
Change-Id: I483c5a3eb4d54fae6b5b2902c69b67e8c2e0be5e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Run both TCP and UDP to run at the same time. This requires two
extra threads in echo-client sample application.
Change-Id: I450a26d7ab1472150ea8f1309a43897a30bd4d90
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive lot of packets, it might happen that we exhaust
all the DATA buffers in the system. This would prevent from
us sending anything to the network.
Change this by splitting the DATA buffer pool into RX and TX
parts. This way RX flooding cannot consume all DATA buffers
that needs to be sent.
Change-Id: I8e8934c6d5fdd47b579ffa6268721b5eb3d64b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use context specific net_buf pool in echo-server and echo-client.
This will prevent application from allocating all available network
buffers in the system and thus preventing the core IP stack
functionality.
Change-Id: I3dbc64dd81c8a1165241426287a3530d00cbc7bf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit addes new configuration for examples which use
nrf5 802.15.4 radio.
Change-Id: I0c57334d071fb58bc2282feb3f4e6b949ce5d472
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Add a README.rst file to both echo-server and echo-client
sample applications.
Jira: ZEP-1539
Change-Id: I1ee1d02a3de0295697117f448d8e13f5b161e11b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added conf files for qemu_cortex_m3, until a better solution
than CONF_FILE=prj_$(BOARD).conf exists in the makefile.
Change-Id: I1edc4f37bb3c49ecb65abf7c93b3c9f4608d601e
Signed-off-by: Richard Peters <mail@richardpeters.de>
Core stack is not removing the network buffer if app data length
is zero. So memory leak happening here.
Change-Id: I3d354b5e7008396ca7cb977631036871998165b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit changes the net_buf getter functions in nbuf.h
by adding a timeout parameter. These function prototypes
are changed to accept a timeout parameter.
net_nbuf_get_rx()
net_nbuf_get_tx()
net_nbuf_get_data()
net_nbuf_get_reserve_rx()
net_nbuf_get_reserve_tx()
net_nbuf_get_reserve_data()
net_nbuf_copy()
net_nbuf_copy_all()
net_nbuf_push()
net_nbuf_append()
net_nbuf_write()
net_nbuf_insert()
Following convinience functions have not been changed
net_nbuf_append_u8
net_nbuf_append_be16
net_nbuf_append_be32
net_nbuf_insert_u8
net_nbuf_insert_be16
net_nbuf_insert_be32
net_nbuf_write_u8
net_nbuf_write_be16
net_nbuf_write_be32
so they call the base function using K_FOREVER. Use the
base function if you want to have a timeout when net_buf
is allocated.
Change-Id: I20bb602ffb73069e5a02668fce60575141586c0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Currently, the function accepts a struct sockaddr * but the code
immediately type casts this to either in_addr or in6_addr. This is
incorrect behavior as the first field in a sockaddr is sa_family_t
and not address data.
So without special knowledge, a developer will use a sockaddr structure
as the parameter and then wonder why the address information isn't being
set correctly.
Let's change this parameter to void * which makes this function similar
to inet_pton().
Jira: ZEP-1616
Change-Id: I1fc9368da999d90feb07c03fac55dcc749d4eba6
Signed-off-by: Michael Scott <michael.scott@linaro.org>
This commit enables echo-client application to start to
send data over TCP connection.
Change-Id: I9acdaae7f1e8411952c30caeedc9c1fb07cdd448
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add configs for MCR20A device to echo_server and echo_client.
Change-Id: Ic0e310c0eb2eefe6ce5752a20b0c079b7ea8757c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
These logs are mandatory to spot buffer leaks. Unfortunately, they are
still not detailed enough to spot the actual place where the leak
happen.
Change-Id: If36dfa7a54aa1546fb268301f369b5ecd046e276
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All sample applicatons in Zephyr, using the ENC28J60 driver, set
the ETH_ENC28J60_0_GPIO_PIN Kconfig variable to 19.
However, in the Kconfig.enc28j60 file this variable is set to 24.
That default value, 24, was used only during the first iterations
of this driver and never used again.
In this patch, we set the Kconfig variable to 19 and simplify
project configuration files by removing one line.
Change-Id: I3d5fd9da04a3f10845d2a409de56f5b9c235e995
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove CONFIG_GPIO=y for the Arduino 101 board. This configuration
is now set by default in the board configuration file.
See commit 8f96628064.
Change-Id: I6fa73a5785d78c51f03a0af48fc2aa8cc7636c7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This makes it possible to setup a Bluetooth connection using net_bt shell
commands.
Change-Id: Ie4ae7e61345315ef987a00b6b5a28c0419f6b1c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the interface is not UP wait for MGMT event if that is enabled.
Change-Id: I4866c23d1e6f5b1a7cf212434d794673d7e756ce
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_NETWORKING_WITH_BT no longer exist, instead
CONFIG_NET_L2_BLUETOOTH shall be used.
Change-Id: Ide353b7620228e431c535768b37749994caf8e8b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The NET_SLIP Kconfig choice option doesn't really do anything for us,
plus we get warnings related to setting CONFIG_NET_SLIP=y in prj.conf
files.
Warnings like:
warning: override: reassigning to symbol NET_SLIP
warning: override: NET_SLIP_TAP changes choice state
So remove NET_SLIP choice and remove CONFIG_NET_SLIP=y in the prj.conf
files.
Change-Id: Ibccf9cf167f4c8a4df480ca0396bf83fcf60df1e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add common log level for all IEEE802154 drivers.
Change-Id: If92c96b14e630d4482aadf9cacb25662d6663399
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Sample projects that pair the frdm_k64f board with a cc2520 require
additional pinmux settings beyond the standard frdm_k64f pinmux. These
settings used the private k64 pinmux API rather than the public pinmux
API.
Because the mcux pinmux driver now always supports the public pinmux API
(vs. the k64 pinmux driver which only supported it in pinmux dev mode),
we can convert the frdm_k64f_cc2520 projects to use the public pinmux
API and the mcux pinmux driver.
Change-Id: Idfae8393171b007d8629e34bfae64255f55c6792
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When building the echo_client sample app, the following warning
is found:
echo-client.c:37:
echo_client/src/echo-client.c: In function 'send_ipv4_data':
include/logging/sys_log.h:108:20: warning: format '%d' expects argument
of type 'int', but argument 7 has
type 'size_t' ...
So, this patch changes %d by %zu to remove that warning.
Change-Id: I8a3822bca6d5988e531684d647de93bd77aabf9b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add build test to sanity_check to get a complex net app being built
for frdm-k64f.
Change-Id: Ib136f7964b65ad2167a3ed4484bff3bfe2a7ebad
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add ARG_UNUSED to some function parameters to avoid
compiler warnings.
Change-Id: I5db5bc536f1eeb084e08d2fbe4a8b0a8456e67a5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Removing useless options, refining the logging and of course setting the
right IP to make it work.
Change-Id: I0c0c1979d590bc4c4fcb3a1d1a252b87b0153511
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When zephyr receives a 15.4 frames it allocates 1 RX buf (nbuf) and 1
DATA (buf), and it gets queued on net stack for post processing.
Problem: receiving a lot of frames is just completely nominal and very
fast (timing is critical in radio, and the rx thread of the radio driver
has a high priority, much higher than net stack's rx post processing).
So guess what happens when CONFIG_NET_NBUF_RX_COUNT=10 though let's say
12 packets are coming in?
The RX buffer pools gets empty and soon the system hangs on getting a
newly allocated one.
This proper CONFIG_NET_NBUF_RX_COUNT tweak fixes the issue, however some
future work will reduce the need of so many RX meta buf:
- l2's recv could be called right away at net_recv_data, before queuing
the buffer for post-processing, but this could affects reception
timing on radio side, which is critical.
- An l2 pre-processing (in the middle of what current l2 recv does)
could be implemented, it would be technology depenedent (aka: not
mandatory on all l2) and could quickly decide what to do and at best
drop the whole, or at least drop the RX meta buf (frag would still be
kept). Let's see.
Jira: ZEP-1427
Change-Id: Ic75b02efa36e35b450c02b3e6439a8d73f03f839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes left over CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: Ida3a2c2dba6e44f112711170f883c0582c3ee7ed
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes echo_client and echo_server samples.
Fixes compile error:
...
src/built-in.o: In function `fdrm_k64f_cc2520_pinmux_setup':
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
...
Change-Id: I590f88f6bd083a30deea77fa860f001a3a55b278
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This enables Bluetooth L2 driver with CONFIG_NET_L2_BLUETOOTH and
removes CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: I6a75c105e45a1b748abf6a70234d415c5121bcdc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Common code found in samples/net/common
App is built with:
make BOARD=frdm_k64f CONF_FILE=prj_frdm_k64f_cc2520.conf
Note: debug messages are enabled on many parts of the system, and these
are killing the timings. So it's not unusual at all to see rx errors on
cc2520 side. Without most of the debug, much less error will occur (if
any when dbg is fully disabled).
Change-Id: Ib6f0868c300652270661e72e80108804308164ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The random driver, if enabled, is initialized by the kernel
initialization function. There is no need for applications or tests
to re-initialize the driver.
Change-Id: Ib4712dda937a7a83a8079c8aa662cec03c5416f8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: Iab7cc6da110e9c98720211a6f773dcf055a3a411
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CC2520 is not embedded on an arduino_101, it is however possible to wire
one, and thus it requires to provide cc2520_configure_gpios() function.
This one, being common to a101 is found in samples/net/common.
Change-Id: I86f2734847edb3f6a968522afccc3099ed854d13
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As the default board is qemu_x86, make sure there is similarly
named config file that can be used by default.
Change-Id: Ibc480d3b4eecc2601e3670c8da19be9c01833c36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use by default a board specific config files for both
echo-server and echo-client sample applications.
This makes more sense than using the network technology specific
config file that was used earlier.
Change-Id: I155fc138f4b0ed1166f4e25267513afc3fb6fd76
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy stack artifacts from the echo-server and echo-client
config files.
Change-Id: Icc591b9540495c4ee181517369b0df9bb91972bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The used IPv6 or IPv4 address can be set in the config file.
This way one does not need to edit the source file to setup
the desired IP address.
Change-Id: Ic900bd4694481b4b035026ad0ba7b9280eb84e4a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled DHCPv4 support, then do not try
to set static IPv4 address.
Change-Id: Ia359f578044d72b951f53c509c92c09d575207f0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Having 1024 bytes was really unsufficient and creating a lot of weird
bugs everywhere.
Change-Id: Ib642744fa6dfc9f3a699a0dc2f0c1783dc6f87b2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Semantic has changed in k_sem_take in comparison with legacy
nano_sem_take.
Change-Id: I06129b6f15f66266919bf371c2358e5634109156
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous commits support auto configured IPv6 addresses so no
need to manually tweak the address settings.
Change-Id: Ie641212981a04229721c84990a54876977d9cfc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Forcefully set the IPv6 address in echo-client so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: Id24f9aa84b30a3da941bb6b9e4522c7218687e12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Extends the echo server and echo client samples to work with YAIP
network stack with ethernet L2 layer and ENC28J60 ethernet device
on Arduino 101 boards.
Jira: ZEP-859
Change-Id: I242e5555aff18741bf00a551424b081b5396f4b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
In some cases the BT header files are missing and the compilation
will fail when done by sanitycheck script.
Change-Id: I484e1f0c23975053e947bc57ff3c9f4042fad71e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The echo-client can now initiate a TCP connection.
Change-Id: I8223ef377127319dd1791497675a4abe8b382365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the active connection to another TCP host fails, then
quit as it is no point continuing.
Change-Id: I21317d7062d4ac93c342834a2503139fe27076e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-client application opens
a TCP socket and starts to send data to server. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side.
Change-Id: I35306b8ecd6794365086a23bf6a17f5103d7ac80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It will not build without it. Generalize it then.
Change-Id: I334586f629de1f057e654a13a1c705cd559b44d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the echo-server and echo-client are run in real hw, then
we need to add the used IPv6 prefix to the system. Otherwise
the client is not able to send anything because there is no
route to 2001:db8::/64 network that is used in these examples.
Change-Id: I3a00b77acf1329b3e448bd62ec38cc408c0bd086
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This moves IPSS sample code to samples/bluetooth/gatt which shall become
the default place for GATT related samples that can be reused.
Change-Id: I04089f6e43bfcc30ee1c7cc766620f19e3dad08e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move network testing setup from echo-client to common net_testing.h
file which makes the application much simpler.
Change-Id: Ib1a90b9d87014b7f9adc5f6865ce0fc9faa13422
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add separate prj_qemu.conf files for qemu_86 board type. Also
remove set_options from Makefile.ipstack which is not required now.
Now build the echo-server with "make server NET_IFACE=qemu" and
echo-client with "make client NET_IFACE=qemu" command options.
Change-Id: I1f3c9c6a198f2b6cae54ae4a5da970b284ef84de
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add bt related qemu flags only when BT is enabled.
Change-Id: Idc611dcf7726829ed77c3f4898abd794a825212f
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This enables using echo_client with Bluetooth by passing
CONF_FILE=prj_bt.conf, it is also enabled for testing so changes to
echo_client are actually tested with NETWORKING_WITH_BT.
Change-Id: I1ff83a9d0049e121dc7e406656e3282b16ee8c91
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is prefered to use #if (!)defined form for checking defines since it
can actually check more complex conditions.
Change-Id: Ib8779a344a1a7ec02f10b0e23a533c78e68343b5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If neighbor discovery is in use, then we do not need to do
various route etc setup. Normally ND needs to be active
but in some specific scenarios it can be turned off. One
such scenario is if an application is run inside qemu
which uses slip and host tun0 interface for communication,
in this case host typically do not activate ND for tun0
so we need to disable it also in zephyr side.
Change-Id: I8ac59990c5bbcdb06cca98bde7be3a0ad6e807a8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Rename application init function to init_app() so that it is more
descriptive.
Change-Id: Id470756345c0bd10b103270115b26f3e8a281d17
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Piotr Mienkowski