1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Every board that uses dts-enabled gpio drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_GPIO_DEVICE and
HAS_DTS_GPIO.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds a board-specific dts overlay and fixup file to the arduino_101
environmental sensing sample, in preparation for making the sensor
drivers require dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is very inconvenient to maintain an application that both runs on a
Zephyr board and an out-of-tree board.
It forces one to write build scripts like this in the app:
if(BOARD STREQUAL my_out_of_tree_board)
set(BOARD_ROOT some/out/of/tree/board/path)
endif()
To avoid this we change the semantics of BOARD_ROOT. Instead of it
being a path to the board root it is now a prioritized list of board
root directories. Zephyr will append ZEPHYR_BASE to BOARD_ROOT.
This ensures that Zephyr boards can be used when the out-of-tree board
directory can not supply the requested board.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The shell subsystem, as it is today, depends on having a UART,
therefore let's add the dependency explicitly in its Kconfig
Fixes#10190
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
- Use new k_thread_name_set to set thread names.
- Use board name in sample instead of architecture.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
prj_stack_guard.conf not related to this sample, we have tests other
samples for stack guard testing/demonstration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Kconfig option CONFIG_BUILD_TIMESTAMP became unused when
BUILD_VERSION was introduced, but it's option and parts of it's
implementation was not completely cleaned from the repository.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
With recent changes, sockets no longer depend on Newlib libc, so
let's have actual samples which demonstrate this. echo_client/
echo_server, which were ported from net_app samples, are converted.
The rest of socket samples are intended to be buildable on a
POSIX system (e.g. Linux), so they rather stay with more
full-fledged libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Unify method of enabling secure TLS sockets in samples by using TLS
overlay config file instead of standalone config files.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid having not-necessarily board specific configs in a separate file.
Instead, have a single project file with appropriate overlay configs.
Board specific configurations can be added in future if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The periphreal_sc_only sample app wasn't very clearly logging
information about pairing failures and could give the false
impression that everything work when it doesn't. Enable some more
logging Kconfig features and take advantage of the pairing complete &
failed callbacks to give more information to the user.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This sample is made to demonstrate use of shield x-nucleo-ik01a1.
It will display embedded sensor data endlessly.
It requires a board with Arduino i2c as minimum configuration
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
It is no longer necessary to set the KCONFIG_ROOT variable when the
KConfig file is in the application root directory.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add harness console and include regex for output
pattern matching to determine correctness of
sample execution.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support for VLANs which are disabled by default.
The application can be configured to use the VLANs by setting
the IP addresses properly in config file. The VLAN support in
this sample application is only meant for testing multiple network
interface handling.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user enables VLAN support, then the sample application will
create two extra VLAN network interfaces for testing purposes.
The application can be compiled like this for VLAN support:
cmake -DBOARD=qemu_x86 -DOVERLAY_CONFIG=overlay-vlan.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The spi project configuration was incorrectly enabling i2c, which causes
a cmake failure if a board supports spi but not i2c. Found by CI when
adding spi support to the mimxrt1050_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support for nRF boards by using the software-based PWM driver. The
prescaler has to be configured so that the clock runs slower in order to
make the on-board LED blink in the way it is described in the Readme.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Fixed building with ninja adding BUILD_BYPRODUCTS based on suggestion
from @SebastianBoe in issue #7760.
Fixes#7760
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the POSIX arch, time does not pass inside infinite loops.
=> Add a small delay in each iteration of those loops
when compiled for it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix the Id of the longarray message.
Also change the display of the "Address" entry to use "Id" instead of
"Entry" to be consistent the other displayed entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_NRF51822_QFAA
CONFIG_SOC_NRF51822_QFAB
CONFIG_SOC_NRF51822_QFAC
CONFIG_SOC_NRF52810_QFAA
CONFIG_SOC_NRF52832_QFAA
CONFIG_SOC_NRF52832_CIAA
CONFIG_SOC_NRF52832_QFAB
CONFIG_SOC_NRF52840_QIAA
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is no reason why this sample should have a higher version required
of CMake in order to build.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
As per PTS, IUT is expected to return success for the
Range Get messages (Light Lightness Range Get for
MMDL/SR/LLNS/BI-01-C, Light CTL Temperature Range Get
for MMDL/SR/LCTLS/BI-01-C). This commit take care of
this issue.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now if transition (instantaneous or non-instantaneous) is due
to delta level, then state binding would be as per it.
This is as per 3.3.2.2.3 of Bluetooth Mesh Model
Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Corrected spelling mistakes for content of enum defined in
transition.h & renamed some functions. Corrected comments
in main.c
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Jakub Rzeszutko