$(srctree)/kernel/common/bsp does not exist anymore,
remove it from CFLAGS
Change-Id: I948ed9aa97469498a803916060935deb7a1a0271
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TiMo is very ambigous, be generic and call it kernel.
Change-Id: I66b3e436afbc89e874f31a89b98cc04aa821c787
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adaptes the Kbuild system to the change of location of
the header files for drivers.
Old location: driver/
New location: include/driver/
Change-Id: Ic49d373149ee44d781419c5c68e59408c8ef1c11
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit creates all the Makefiles that describe the object-
bundles for the arch directory and every sub-directory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Icb4ebcfc430a132e514507149ad5ab6878eeed64
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the arch directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I744225ddaa5e2b45113ca049457a8f9925ebe4c2
Now for x86 platforms, UART is configured statically or dynamically into
the driver and not anymore in the board's system.c. Thus limiting the
information to be scattered into 2 files instead of 3. Then in future,
it will also be possible to remove driver specific informations from the
generic UART API structure.
Change-Id: I7b7fa37f10f88316a4d375c99de3bbacf152a3e3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
By default it is set to 'n'. This will be useful to enable the PCI layer
code if required. On quark boark, it is selected by default as UART
driver needs it currently.
Change-Id: I7aa38e73c431c66ebbd8092aff0a14d5fb9268d5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This fixes many issues around PCI enumeration from old API:
- a static internal table was fed with scanning results, thus eating
memory, and worse: due to the limit of its size, scanning for new
classes was impossible unless growing statically the size of this
table --> more memory eaten! Not to mention PCI enumeration is done
once at boot time for driver initialization and that's all, so this
table is hanging around for nothing afterwards.
- one needs first to scan a class, then maybe he will be able to find
his device via pci_dev_find. Where all could be done at once.
- pci_dev_find was not trustworthy due again to the internal table. Now
if the device is not found, one will know it really went through all
the possbilities.
- still let the possibility for hard-coded BARs value on driver side
(thus no PCI scan required). However this is greatly advised not to do
so as BARs might change over a firmware/BIOS update.
Comparison:
old pci_dev_scan: could only filter out via class mask.
new pci_dev_scan: can filter out via a class, a vendor and device ID
(it could easily do the same for Function and BAR index as these are
usually fixed and informed through datasheet)
old pci_dev_scan: was limited in its findings by the size of the
internal result table.
new pci_dev_scan: can proceed through all the buses and devices every
time (there are optimizations to avoid useless work of course)
old results did not tell about the function or BAR index.
new one tells, and the structure has not bloated.
old internal code: was storing a big table of results
new internal code: is only storing a small lookup structure and an
array of Bus:Dev pairs for each PCI class for optimizations purpose.
(though, if needed, we could disable this through some #ifdef)
Usage:
- Have a local struct dev_info
- Fill it with what you want to look for, currently: only class and
vendor_id/device_id. Function and BAR index could be added if needed.
- Call pci_bus_scan_init(): this will reset the internal lookup
structure.
- Call pci_dev_scan(<a pointer to your dev_info>): at first call, the
internal lookup structure will pick up the informations from dev_info
and will try to find out what has been requested. It will return 1 on
success, or 0. On 1, your dev_info structure will be updated with the
found informations. If more devices can be found against the same
lookup informations, just call again pci_dev_scan(<a pointer to your
dev_info>) as long as it returns 1. When 0 is hit, it will mean you
found all.
Change-Id: Ibc2a16c4485ee3fed7ef4946af0ece032ae406e4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Not only is __start is a neutral label, but using a common entry point for all
architectures allows the entry point to be hoisted out of the linker script and
specified by the build system.
Change-Id: Ibcbb11a40ff964e0fc3c90afcfe231746071b040
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
In order to have a better compiler support consolidate
inline assembler code in a set of header files.
If another compiler is used, that supports a different
inline assembler format, asm_inline_<compiler name>.h
heder files have to be provided.
Change-Id: Iecc7d96419efd767a8463933badd4db4a557de5b
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Moves all files in this sub-directory to kernel/nanokernel, then
deletes the sub-directory itself. Both of the relocated files are
used during nanokernel initialization, which makes their inclusion
in the main nanokernel source directory logical.
Change-Id: I1cac0561317f808eab2de74ece9868c62c70b6d8
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
No need to duplicate PCI class definition since it's alread defined in
drivers/pci/pci_mgr.h.
Change-Id: I834b99c300487d7c51e406555de87d2484222213
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only moving the header from drivers/console/uart_console.h to
include/drivers/console/uart_console.h so source file did not need to be
changed, only the defs.objs files to look into include/drivers/console.
Change-Id: I585e16b50d9ffecf01ca9225e80f0e101f62ee4c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename camelCase uartConsoleInit function for consistency with the
rest of the code in serial console.
Change-Id: I519737070538e9c0f52a8d110a3eff68e0185ce2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Anas Nashif