This adds indication support for one characterist of the vendor service
so it can be used to test bt_gatt_indicate API.
Change-Id: Ief058c93caf3e30972eca920c050451f6120543b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
TinyCrypt provides implementation of AES CMAC so there is not need
for internal implementation in SMP code.
Change-Id: I15fe0daf8fca8c44b002636983b46502419c57a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to decrease number debug messages using config option.
Change-Id: I987d25c6d4b18503d6beb7feab97e9207100323d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
sys_rand32_get appears to get stuck with same number for a while so
instead just increment the heart rate by 1 until 160 and then return it
back to 90.
Change-Id: I2aea870c68539271a1bb6190a958a7e2d1914dc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a single option for enabling use of TinyCrypt library for
crypto. This option selects all required TinyCrypt options
depending on BT features enabled. Thanks to this applications
only need to select single option instead of set of required
TinyCrypt features.
Change-Id: I2862e9ad3e204635f2ed3199433982bcfb7112f6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The handle shall be the characteristic value handle not the CCC.
Change-Id: I677ca12fdd59023f2498f712b060197a59baee64
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With NBLE driver it is not possible to register services before
bt_enable completes.
Change-Id: I71194150b807e183b0016accb600ae9538ba9b01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This way we avoid bugs coming from wrongly (human) counted length.
Change-Id: I95eb87a78fc12d4c5e083ce1c65d8b690ad8db78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This way we don't need a special BT_BYTES macro and avoid bugs coming
from wrongly counted number of bytes (which is now evaluated at
build-time).
Change-Id: Ic6319234a816fe2fab6229b3bb980d0e3503e241
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This adds a test case that passes prj_nble.conf as CONF_FILE so that
the same code tested using HCI Bluetooth driver is also tested using
NBLE driver.
Change-Id: Ia4ad59d74b82c02007c55ea4fa8f53833d7a7fe5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no need to keep arch specific prj.conf for these samples are
they are always the same.
Change-Id: I0f93b5a47458f9800a6654cc45914b911b42b3e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the code behind CONFIG_BLUETOOTH_GATT_DYNAMIC_DB builds
properly and sanity_check is able to detect problems whenever there is
a change affecting it.
Change-Id: If46d1d9723f9daa494611e5a1799afd943e6519c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is essential so that the application can be notified of
connection failures and also be able to know the reason for the
disconnection.
Change-Id: I30108958963f6aeac690612bb26738dc4c67ca80
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
PROJECTINCLUDE is not required in app makefiles.
Change-Id: I3751b7c51c453dfe47d207bb11d171138668c4e7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now that the H:4 driver is the default it doesn't have to be
explicitly enabled anymore. The only exception is the "no default
driver" option that's needed by the test_bluetooth unit test.
Change-Id: Ie582d51202714e314b76ffa9659c7a232a18fc1a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll need to have a much more flexible LE advertising API. This is a
first step in that direction. A convenience BT_LE_ADV() macro is
provided to ease converting application code.
Change-Id: I74854487bbdfb4b1cf1bee0b6351d1750a56ff86
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have a clear split between LE & BR/EDR rename these APIs with the
appropriate prefixes.
Change-Id: I983df2b5880947d96f0ad289d12f3383f44894be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactors existing menu by putting as topmost selectable option
general bluetooth subsystem support instead so far Low Energy (LE).
Implication of the change is introduction of new BLUETOOTH_LE config
flag. The flag needs to be propagated to all existing bluetooth
related apps to make them buildable.
Change-Id: I608c1baad038e0ee4cccf44a3e597e16ae1f7f54
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The spec says it should always be the very first descriptor after the
characteristic:
"BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part G] page 534:
3.3.2 Characteristic Value Declaration
The Characteristic Value declaration contains the value of the
characteristic. It is the first Attribute after the characteristic
declaration. All characteristic definitions shall have a
Characteristic Value declaration."
Change-Id: I6c38dea9cc4c1a05997edbd348e2759680472725
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
value_handle is not used for anything.
Change-Id: I3885d221b162eb3bd44956af64280baf61dc001b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_register will assign a handle if not initialized and removing
the handle makes it simpler to change the attributes since it is no
longer possible to have conflicting handles.
Change-Id: I787f7325cc990c360056b1aefd07bb7d7876b445
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow calling bt_gatt_register multiple times so different tasks
can add their own services separately.
Change-Id: I8143ddedfa1079087d608013d1a97b552a3007dc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allow sending direct notification to a specific peer without
using CCC which is allowed by the spec:
BLUETOOTH SPECIFICATION Version 4.2 [Vol 3, Part F page 507
3.4.7.1 Handle Value Notification
A server can send a notification of an attribute’s value at any time.
Change-Id: Ieff29216cb9ba197c0da92d7b22b26e63101cfa8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To allow the remote central to pair and encrypt the link.
IO capabilities are set to DisplayOnly.
Change-Id: I46459539f1b882952d29ee5eb8d17766715de4b8
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
We had two attributes stored with the same handle.
Change-Id: Ib24912578b958d428d6b3da3c2f73994691622bb
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows to specify which roles are supported. Broadcaster and
Observer roles are always supported.
Image size reduction for samples apps:
beacon 43148 -> 15196
central 46892 -> 46356
peripheral 47532 -> 45940
Change-Id: If260c13d63651b9b54df5bafc2c412b01dcb1eb0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This variable is not used outside of c file.
Change-Id: I89b34fb6dd2cdd9dd111b6e33829f170d0ba00ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Andrei Emeltchenko