Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Split ARM and ARM64 architectures.
Details:
- CONFIG_ARM64 is decoupled from CONFIG_ARM (not a subset anymore)
- Arch and include AArch64 files are in a dedicated directory
(arch/arm64 and include/arch/arm64)
- AArch64 boards and SoC are moved to soc/arm64 and boards/arm64
- AArch64-specific DTS files are moved to dts/arm64
- The A72 support for the bcm_vk/viper board is moved in the
boards/bcm_vk/viper directory
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
At its current state, the script tries to access the vector table
list without checking first that the index is valid. This can
cause the script to crash without a descriptive message.
The index can be invalid if an IRQ number that is larger than
the maximum number allowed by the SOC is used.
This PR adds a check of that index, that exits with an error
message if the index is invalid.
Fixes#29809
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
As of today generic _irq_vector_table is used only on 32bit
architectures and 64bit architectures have their own implementation.
Make vectors size adjustable by using uintptr_t instead of uint32_t
for vectors.
The ARCv3 64 bit HS6x processors are going to be first users for
that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
We should not be initializing/starting/stoping timing functions
multiple times. So this changes how the timing functions are
structured to allow only one initialization, only start when
stopped, and only stop when started.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
gen_isr_tables.py generates C-code which initializes a table with
values, and these values are structs with members cast to
(const void *) and (void *), respectively.
The actual struct definition has a member of type (const void *)
and another of type void (*)(const void *).
In order to avoid a large amount of reported issues in Coverity,
cast this to the exact type.
Signed-off-by: Torstein Grindvik <torstein.grindvik@nordicsemi.no>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As of today we have a bit weird situation with generated
sw_isr_table / irq_vector_table tables.
On the final linkage stage we pass two files which content
section with sw_isr_table / irq_vector_table. They are
* libarch__common.a (with an outdated tables from the first
linkage stage)
* isr_tables.c.obj (with an actual tables)
The sections where tables are located are marked with
".gnu.linkonce" prefix. That means:
<<<As a GNU extension, if the name begins with .gnu.linkonce,
we only link a single copy of the section.>>>
However the "libarch__common.a" is passed to linker with
"--whole-archive" option which means <<<include every object
file in the archive in the link, rather than searching the archive
for the required object files>>>
That combination confuses MWDT linker and breaks linkage with
MWDT toolchain.
As a simple fix we can move the sw_isr_table / irq_vector_table
sections to their own library and link this library with
"--no-whole-archive" option.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
All ISRs are meant to take a const struct device pointer, but to
simplify the change let's just move the parameter to constant and that
should be fine.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The `TEXT_SECTION_OFFSET` symbol is used to specify the offset between
the beginning of the ROM area and the address of the first ROM section.
This commit renames `TEXT_SECTION_OFFSET` to `ROM_START_OFFSET` because
the first ROM section is not always the `.text` section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Random readability improvements:
- avoid a stack trace on error by using sys.exit()
- include "error:" in the error() output, for grep
- print conflicting addresses on multiple IRQ registration
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Currently, the Cortex-M SysTick-based timing info implementation is
incorrectly specified for all 32-bit ARM architectures.
This commit fixes that by restricting the SysTick-based implementation
to the ARM Cortex-M architectures only; in addition, it removes the
ARM64 timing info implementation as it is identical to the default
generic implementation and was previously added only as a workaround
for the aforementioned problem.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
z_isr_install is not suited to handle multi-level interrupt formats.
This update allows z_isr_install to accept irq numbers in zephyr format
and place them in the isr table appropriately.
Fixes issue #22145
Signed-off-by: Jaron Kelleher <jkelleher@fb.com>
The timer counter for ticks on MEC1501 SoC is based on the RTOS
timer which runs at 32kHz. This is too slow for timing benchmarks
as most cases can be finished within one or two ticks. Since
the SoC has higher frequency timers running at 48MHz, add
the necessary bits to use these for timing benchmarks.
Fix#23414
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The current `z_isr_install` implementation asserts that the IRQ to
which the ISR will be installed must be disabled.
This commit disables that assertion for the ARM GIC because the SGI-
type IRQs can never be disabled as per the specifications and this
causes the assertion to fail for them.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The existing isr_tables implementation does not allow enabling only
hardware interrupt vector table without software isr table.
This commit ensures that CONFIG_GEN_IRQ_VECTOR_TABLE can be used
without setting CONFIG_GEN_SW_ISR_TABLE.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
To be able to pass the unit test we need to add a set of defines for the
ARM64 architecture. Fix this.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Users are reportedly not able to understand how to debug the following
error message from gen_isr_tables:
gen_isr_tables.py: multiple registrations at table_index 8 for irq 8
Debugging issues these kinds of issues is difficult so we need to give
users as much information as possible.
To make it clearer that it could be an abuse of the 'IRQ_CONNECT' API
that is causing the issue we add this to the error message.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In zephyr_linker_sources().
This is done since the point of the location is to place things at given
offsets. This can only be done consistenly if the linker code is placed
into the _first_ section.
All uses of TEXT_START are replaced with ROM_START.
ROM_START is only supported in some arches, as some arches have several
custom sections before text. These don't currently have ROM_START or
TEXT_START available, but that could be added with a bit of refactoring
in their linker script.
No SORT_KEYs are changed.
This also fixes an error introduced when TEXT_START was added, where
TEXT_SECTION_OFFSET was applied to riscv's common linker.ld instead of
to openisa_rv32m1's specific linker.ld.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Before introducing the code for ARM64 (AArch64) we need to relocate the
current ARM code to a new AArch32 sub-directory. For now we can assume
that no code is shared between ARM and ARM64.
There are no functional changes. The code is moved to the new location
and the file paths are fixed to reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
to its own linker file snippet so snippets can be placed before it.
Using zephyr_linker_sources().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Global variables related to timing information have been
renamed to be prefixed with z_arch, with naming arranged
in increasing order of specificity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Remove redundant inclusions in irq_init.c
- Remove comment about thread_abort function,
which does not belong in this file (probably
left-out during code refactoring)
- Include arm cmsis.h only under #ifdef CONFIG_ARM
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix this warning, as a preparation for a CI check:
arch/common/gen_isr_tables.py:167:11: C0123: Using type() instead of
isinstance() for a typecheck. (unidiomatic-typecheck)
isinstance() has the advantage that it also handles inheritance, though
it doesn't really matter here. It's more common at least.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reported by pylint's 'bad-whitespace' warning.
Not gonna enable this warning in the CI check, because it flags stuff
like deliberately aligning assignments and gets too cultish. Just a
cleanup pass.
For whatever reason, the common convention in Python is to skip spaces
around '=' when passing keyword arguments and giving default arguments:
f(x=3, y=4)
def f(x, y=8):
...
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It was discovered that the xtensa version of
z_arch_irq_connect_dynamic() was being removed along with the old
xtensa architecture support, because it was never included in the asm2
builds.
But there's no xtensa-specific code in it at all. Architectures that
use the existing sw_isr_table mechanism and don't (or can't, in the
case of xtensa which has fixed interrupt priority) interpret the other
parameters might as well have access to a working generic
implementation.
Fixes#18272
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
No-cache SRAM section is currently used for ARM-only builds
with support for no-cacheable memory sections (i.e.
CONFIG_ARCH_HAS_NOCACHE_MEMORY_SUPPORT) and it holds
uninitialized data. This commit properly defines the
corresponding linker section using SECTION_DATA_PROLOGUE
and GROUP_DATA_LINK_IN macros.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is the generic symbol to select or otherwise test for when 64-bit
compilation is desired. Two trivial usages of this symbol are also
included.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The results were incorrect because the timer was firing the
interrupts before the measurement was made.
Fixes: GH-14556
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Python tip:
for i in range(n):
some_list.append(0)
can be replaced with
some_list += n*[0]
Similarly, 3*'\t' gives '\t\t\t'.
(Relevant here because pylint flagged the loop index as unused.)
To do integer division in Python 3, use // instead of /.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Not needed in Python. Detected by check C0325 in pylint3.
Also replace an
if len(tag):
with just
if tag:
Empty strings, byte strings, lists, etc., are falsy in Python.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The commit 77cb942a97 broke the generation of sw_isr_table for
multi-level IRQs. This patch fixes it.
Fixes#13082.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
It's incorrect behavior to call IRQ_CONNECT() on the
same IRQ line more than once, but only x86 was catching
this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Flavio Ceolin