Refactored the structure of the troubleshooting section so it
is more similar to how e.g. the ArchWiki lists troubleshooting
entries, which makes it easier to search for and separate
each entry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The exisitng documentation was out of date and
possibly not working.
Added a section on how to use NAT and port forwarding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation guidelines have a specified order of
header underlines that this file did not follow.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes overlay configuration to allow running the test on CI without
externally connecting two pins.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Fix missing input/output enable flags on pinctrl macro, which
wouldn't allow for driver to see and apply flags configuration
made in the device tree.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Updates and fixes to support IPM sample on ESP32:
- fix IPM sample code for APPCPU and PROCPU
- align with memory layout, add flash awarenes
- shell commands to stop/start APPCPU
- reorganize overlays
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Updates and fixes to support APPCPU.
- fix ld scripts
- fix and update memory layout
- fix build issues
- fix sysbuild
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Fix missing flash and code partition.
Add missing dts entries and use common partition tables to all related
non-Espressif boards, previously ommited.
Add uart1 node in pinctrl for APPCPU.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Align the shared memories with the memory.h layout.
Reorder nodes to show memory related nodes together.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister's extra arguments feature only works correctly if the fully
qualified platform name is given, which was not the case. Make all
platform names for the shield testcase fully qualified to resolve this.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
LPC54114 does not define arduino_header nodelabel, so it cannot be
supported by the shield test within the display sample. Replace with
mimxrt1010_evk, which is supported.
Fixes#80876
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The doc on `_bt_gatt_ccc.value` specifies that only connected peers
contribute to that value. But before this change, it was computed from
all entries in `_bt_gatt_ccc.cfg`, which include bonded but not
connected peers when `CONFIG_BT_SETTINGS_CCC_LAZY_LOADING` is set.
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Fix 'drivers.ipc.mailbox' test suite to restore and improve
its testing functionality:
* fix printf() redirection through IPM console.
* fix and check the dummy driver initialization.
* specify correct Twister harness type (Console)
and use matching patterns to recognize the expected
console output.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The FRDM_MCXW71 Platform has a reserved IRQ as its
last IRQ, this test was using this IRQ to
test an interrupt and would not fire. This change
ensures the test does not use the reserved IRQ.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
The flash_flexspi_nor_check_jedec() checks the lower 16-bits of
the manufacturer ID and installs a custom LUT table.
Add an exception to check for the whole 32-bits so we do not
accidentally install custom LUT for flash devices that do not
support this LUT table.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
CACHE64_GetInstanceByAddr() function was asserting when an instance was
requested for an invalid address that the CACHE64 controller does not
manage. This behavior is not correct, as the CACHE64 management
functions check to see if the instance number returned by this function
is out of range (and if so, simply return without modifying the cache).
This assertion was causing a failure within the USDHC driver, which
performs a cache clean/invalidate for tx/rx transfers within the HAL
layer. When a transfer was run using a data buffer not in the CACHE64
address range, this assertion failed and caused the application to crash
Fixes#80901
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Workaround failing autopts weekly run due to tester
application having Bus Fault in the nRF53 NET core hci_ipc
firmware at startup.
Having atleast 32 bytes free in nRF53x hci_ipc sample to
avoid Bus Fault when Zephyr Kernel does SYSINIT calls.
Reduce supported ISO Broadcaster instance and ISO TX buffer
counts in the Controller hci_ipc firmware.
Add sysbuild support for tester application so that the
build is CI verified.
sysbuild commandline for LE audio PTS testing:
# west build --sysbuild -b nrf5340_audio_dk/nrf5340/cpuapp
-d build/tester tests/bluetooth/tester
-DEXTRA_CONF_FILE="overlay-le-audio.conf"
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updating the minimum Ram Size for failing tests
that require more ram memory for heap allocations.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
By default, libc malloc allocated area is using all available RAM.
For some yet unknown reason, this conflicts with TF-M resulting in a
Hard Fault before jumping in the non secure application.
For now, define a Libc malloc area defined to 2048 which is the default in
some other typical applications (ARMv7 targets enabling USERSPACE).
Fixes#77847
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
If the lock request was rejected by a set member we should
restore any previously written logs in reverse order.
However there was a off-by-one error in
csip_set_coordinator_write_lock_cb which caused us to attempt to
release member[1] instead of member[0] if member[1] was the
one that rejected the lock request.
Additionally, the lock_set_complete would be called
prematurely before we get the response from the restore
request.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add condition check so that the 11k flag will be updated for set
operation only.
Fix print log error when getting 11k status.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Adds the object core configuration to the latency_measure benchmark's
testcase.yaml file as there have been requests for it.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
The mp pointer is in fs_file_t and fs_dir_t so if the fs pointer is made
NULL then subsequent file I/O operations will cause a NULL pointer
exception. Removing the mount point from the list is threadsafe and
should be sufficient.
Signed-off-by: Chris Desjardins <chris@arch-embedded.com>
Increase target DSI clock frequency for the RT1160, as the DSI
peripheral requires a faster clock to account for the DSI packets that
must be sent outside of video mode frames.
This fix was previously applied for the RT1170, but is also needed for
the RT1160 SOC as they use the same DSI IP.
Fixes#78299
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
With the newly introduced settling time for PLLS, we are seeing a peak
performance drop of 3Mbps in Zperf benchmarks, and also other
performance tests are also impacted.
This settling time was introduced based on observations in lab and not
because of any real problem or bug reported, so, for now, use zero
settling time (same as earlier) till we fully investigate and understand
the impacts and need.
Fixes#80951.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The state check used != instead of == to very that it entered
the streaming state for all streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use net_if_carrier_off during iface init instead of net_eth_carrier_off,
to immediately mark net if as down
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
There is no way to know for sure the size of an image built for a test,
given that zephyr can build for so many different architectures,
platforms, software supports, etc. So it should be clear that the filter
for min_ram and min_flash on the twister testcases is an estimate, and
not a strictly well known value.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
When option ARM_MPU is disabled exclude soc\nxp\imxrt\mpu_regions.c.
It is needed to remove constraints of SRAM and FLASH size.
Fixes#70920
Signed-off-by: Grixa Yrev <GrixaYrev@yandex.ru>
Remove mutex locking in favour of the standard IRQ locking mechanism.
The primary problem with the mutex implementation is that mutex locking
is forbidden in ISR's. This means that any logging from an interrupt
context (e.g. LOG_PANIC in an exception handler), will itself trigger
another assertion due its attempt to use a mutex.
Furthermore, mutexes are a relatively heavyweight locking scheme, which
doesn't necessarily make sense in the context of extremely short locking
periods that would be expected from RTT.
This change aligns Zephyr with the default RTT locking scheme, which
uses interrupt masking to perform access control.
Resolves#79403.
Signed-off-by: Jordan Yates <jordan@embeint.com>
In ARM architectures the entry_cpu_exception_extend calls
svc #0 when trying to generate a `K_ERR_CPU_EXCEPTION`, however
z_arm_svc calls z_do_oops with a stack frame only, and gets the
reason from `r0`. This means that the test working was just lucky
and running it with another compiler (or setting the value of r0
before the svc #0 call, made the test fail).
Cortex-A/R 32-bit architectures was doing a BKPT, this works better
but will not be a hard exception when debugger is attached.
I switched all the Cortex 32-bits to the ARM specified undefined
instruction.
Also RISC-V has a designated unimp instruction that should be used to
guarantee trap.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
The ptables field in arch_mem_domain for Xtensa has excessive
padding as it is incorrectly marked with needing page size
alignment. This is simply a pointer and not the actual page
table so there is no need for that alignment. So remove it.
Fixes#71896
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For some weird reasons, enabling ICOUNT would result in some
tests crashing QEMU. So disable ICOUNT.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
custom simulator needs an executable defined, or else we will have tests
marked runnable with nothing to run them which would result in an
error/warning.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The CONFIG_PINCTRL is removed from the board's defconfig files.
Drivers which use pin control function should add "select PINCTRL"
in their Kconfig files.
Fixes#78619
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Busy-waiting for the result of the nrfs service calls can stall, so
let's use a callback that flags a semaphore instead. Since the API is
supposed to be callable in the context of pre-kernel, fallback to
busy-wait on that scenario.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Emil Gydesen