The IPV6_JOIN/LEAVE_GROUP corresponds to IPV6_ADD/DROP_MEMBERSHIP
definitions so define the former and add tests for them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The in6addr_any is a global symbol that can be used when any
address (all zero bits) is being referenced.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Validate that the SBS fuel gauge driver returns the expected values for
negative currents (discharging).
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add a new API to cancel just one, or mathing requests,
instead of cancelling all ongoing requests.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
CoAP client should be able to push data through functioning socket
while another sockets is failing or reporting poll() errors.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add testcase where sending Ack to incomming Confirmable message fails.
This should be reported to application as now the server is unaware
that transmission have succeeded, so we cannot thread it as success.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
* Use sys_rand_get() and seed the CoAP library, so our MIDs are
random.
* Set socket events per socket, so we don't accidentally receive
on wrong socket
* Reply with correct tokens
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
posix.common contains testsuites that can be separated into smaller
groups of tests. This change moves barrier into a singular
testsuite at tests/posix/barriers app directory.
Signed-off-by: Marvin Ouma <pancakesdeath@protonmail.com>
Fix compilation error by specifying usart1 to be used for uart-pipe.
Add a board-specific configuration file to disable the console,
so, the usart1 will be used only for bluetooth and to specify
the BT_HCI_TX_STACK_SIZE.
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Add a test to make sure that the `gp` global pointer register used for
relative addressing when `CONFIG_RISCV_GP` is enabled can't be
corrupted by a rogue user thread.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Renamed the label of 'ti_tmp116_eeprom@0' node because 'eeprom' label name
already exists in some boards, such as adp_xc7k/ae350, bytesensi_l,
same54_xpro.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
ISH SoCs have zero-address memory mapped to I2C0 controller.
Coredump cannot be triggered by zero-address access.
Signed-off-by: Dong Wang <dong.d.wang@intel.com>
Corrects an issue that was introduced when the interrupt
locking/unlocking was added to the 'sched' benchmark by
unlocking the interrupts before the context switch done by
k_yield(), but after the call to z_unpend_first_thread().
Fixes PR #81050
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fixes overlay configuration to allow running the test on CI without
externally connecting two pins.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Fix 'drivers.ipc.mailbox' test suite to restore and improve
its testing functionality:
* fix printf() redirection through IPM console.
* fix and check the dummy driver initialization.
* specify correct Twister harness type (Console)
and use matching patterns to recognize the expected
console output.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Workaround failing autopts weekly run due to tester
application having Bus Fault in the nRF53 NET core hci_ipc
firmware at startup.
Having atleast 32 bytes free in nRF53x hci_ipc sample to
avoid Bus Fault when Zephyr Kernel does SYSINIT calls.
Reduce supported ISO Broadcaster instance and ISO TX buffer
counts in the Controller hci_ipc firmware.
Add sysbuild support for tester application so that the
build is CI verified.
sysbuild commandline for LE audio PTS testing:
# west build --sysbuild -b nrf5340_audio_dk/nrf5340/cpuapp
-d build/tester tests/bluetooth/tester
-DEXTRA_CONF_FILE="overlay-le-audio.conf"
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updating the minimum Ram Size for failing tests
that require more ram memory for heap allocations.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Adds the object core configuration to the latency_measure benchmark's
testcase.yaml file as there have been requests for it.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
In ARM architectures the entry_cpu_exception_extend calls
svc #0 when trying to generate a `K_ERR_CPU_EXCEPTION`, however
z_arm_svc calls z_do_oops with a stack frame only, and gets the
reason from `r0`. This means that the test working was just lucky
and running it with another compiler (or setting the value of r0
before the svc #0 call, made the test fail).
Cortex-A/R 32-bit architectures was doing a BKPT, this works better
but will not be a hard exception when debugger is attached.
I switched all the Cortex 32-bits to the ARM specified undefined
instruction.
Also RISC-V has a designated unimp instruction that should be used to
guarantee trap.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
For some weird reasons, enabling ICOUNT would result in some
tests crashing QEMU. So disable ICOUNT.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The test had a few off-by-ones in the code, which caused access
to invalid data.
Fixed by setting the right buffer sizes and the right AD length
fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
GAP PAST (and BAP) tests were also enabled since controller support is
under review.
This also adds bqw file which is exported draft project from
Qualification Workspace.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The test was not being run on arm64 and riscv because the filter was
incorrect. Properly fix the filter to run the test on all platforms
that have any kind of MMU enabled.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Most of the tests in the LLEXT subsystem test suite run with memory
protection hardware (MPU/MMU) disabled, to avoid including memory domain
issues while testing the core functionality. Only a few tests need to
run with MPU/MMU enabled.
This patch simplifies the testcase.yaml by setting the memory protection
as disabled in a shared config file that is included by most tests.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Restore Apollo boards now that the issue has been fixed.
Also remove extra CONFIG_SOC_SERIES_S32ZE filters, as they are already
covered by the 'platform_exclude' common section.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The fs_loader test is always executed in the main test source when
CONFIG_FILE_SYSTEM is set, and this is in turn enabled by per-board
config overlays. So there is no point in having a separate test case:
it is simply a duplicate of the "readonly" test.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Fix a problem with the test that manifested itself with a surprising
assertion failure at lib/utils/onoff.c:283. Apparently, due to the
stack being too small, some memory got accidentally overwritten.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
If a string is already present in the provided buffer,
prometheus_format_exposition() appends it instead of overwriting,
hence the buffer needs to be cleared on the test start, otherwise it
works by chance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes the zbus publishing statistics test to account for a non-zero boot
delay, which is often used in hardware testing environments. This fixes
an assertion failure observed on multiple max32 boards in the adi board
farm.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
These tests have been seen failing in CI due to the
real time execution timeout. Let's increase it so it does
not happen.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
k_sleep may not be enough to let advertiser send the message. Instead we
should rely on the bt_mesh_send_cb.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
As part of TinyCrypt deprecation process (#79566) this commit
removes usage of this library from the JWT subsystem and its
related tests.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Test was marked build only with filters in each scenario looking for
sdl-dc which is only available on native_sim, so cut the chase and use
platform_only to narrow things down to native_sim directly instead of
building the world to get information we already know.
reduces build/run time from 78s to 17s on invocation of twister with
default options, saves a ton more when running twister with --all.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add test for cbprintf_package_convert function which checks if
it correctly handles array that holds string lengths. When convert
function is used twice, at first to calculate size of the output
package and then to actually convert the package, array of string
lengths can be used to optimize operation by not calculating
string lengths twice. However, array may not be able to hold all
string lengths that are needed for that package. In that case,
string lengths that did not fit into the array will be calculated
twice, in both conversions.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Jukka Rissanen