Move pinmux defintions under board/<board> and have all board
configuration in one single place.
Change-Id: I055b024384fae2938881b1c57d8ce7426e732e92
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch removes the PINMUX_SELECT_REGISTER macro definition from
pinmux_dev_quark_mcu.c since it is already defined in pinmux_quark_mcu.h
(which is included by the .c file).
Change-Id: I468cf6a54fc30d681f42a59eb2c8401d2b180849
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Add implementation for pinmux pin get API in the shim driver.
It is based on the function from pinmux_dev_quark_mcu.c
Jira: ZEP-189
Change-Id: Ib6673f90cfe8e367fcbd12ed546b1fa3af7e1dbf
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The pinmux_stm32 and pinmux_dev_stm32 drivers use errno codes so they
should include errno.h.
Change-Id: I3fd19b338d5525f44207e8c770285ef218dd27a2
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Add configuration for OLIMEXINO_STM32 board.
By default, the UART console is forwarded to USART1 available on
UEXT connector. All GPIO ports available on the connecot headers
are enabled.
Change-Id: I60b3ff20ea60b5294a3a6c31f4dba0802794f9d8
Origin: Based on nucleo_f103rb board
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Add Kinetis SoC family and rename fsl_frdm_k64f to mk64f12.
This will allow adding new SoCs of the same family and the reuse of code
among SoCs of the family and series.
Change-Id: Iea1a663aef7ce0487f147bdd36f668bebe80deb5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use SOC_SERIES_* for naming SoCs with similar features and architectures
with the goal of code reuse. The Series in the config variable should avoid
name collisions and clearly denote the relationships within an SoC family.
Change-Id: I7a98542f96b5d5dc3acc23782c4d45f98cceb599
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use CONFIG_SOC_FAMILY for the top level SoC family. A family
will have different SoCs or different SoC series with multiple
SoCs.
Adding the Family string to the config variable to avoid confusion
between actual SoCs and families and to prevent name collisions.
Change-Id: Ic99a2c1df7850dee3a45641027af82464dd6fadb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently, the /CS pin is deasserted by _spi_config_cs() and
the pinmux driver sets it as an input afterwards. Later, setting
the /CS pin to an output via pinmux_dev asserts it.
Setting the SPI port 1 pins in the pinmux driver saves a few lines
of code. Moving the SPI init after pinmux init keeps the /CS pin as
configured by the SPI driver.
Change-Id: I4c587ba0a6983cd89dfb5ecedb2914335e86313b
Signed-off-by: Vlad Lungu <vlad.lungu@windriver.com>
This converts the pinmux/dev drivers to use DEVICE_AND_API_INIT(),
since the driver_api assignment will never change.
Change-Id: I0063b19e2afe932e1daf3255e718455aaa200ff1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes this built error:
zephyr/drivers/pinmux/dev/pinmux_dev_quark_mcu.c:138:18:
error: 'PINMUX_BASE_ADDR' undeclared here (not in a function)
.base_address = PINMUX_BASE_ADDR,
Change-Id: I54f15bc262cb887117f7b56660bcf85983daa877
Signed-off-by: liu.lei <lei.a.liu@intel.com>
Fixes this built error:
zephyr/drivers/pinmux/quark_mcu/pinmux_board_quark_se_dev.c:149:19:
error: 'PINMUX_BASE_ADDR' undeclared (first use in this function)
_pinmux_defaults(PINMUX_BASE_ADDR);
Change-Id: I8302e4d6dbcf961e0c80f6bccf740a877bb364af
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The pinmux base address and number of pins are now defined in SoC or board
header files instead of specifying them in kconfig. This is because
the pinmux ties directly to the SoC (or board expanders) so the base
address and number of pins do not need to be configurable in kconfig.
Change-Id: Ib6090d7d022b491f3fe8f522858281504c6302bb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is to follow how kconfig are defined for other SoC/boards.
Origin: refactored from exising file
Change-Id: Ic83b8a336f1910f17b3cf4e7f029fd076ba1b6bb
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The base address and IRQ line are static per SoC, so there is no need
to make them configurable in Kconfig.
Change-Id: Ib78401ff136c29642356f5bda9d6cd3e5c98bece
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This driver will be used when changing pinmux functionality during
runtime.
Change-Id: I8dc7b36af13202b97183c5ee05932567e7396276
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This moves the STM32 based boards (Nucleo F103RB and STM32 Mini A15) to
the "new" pinmux model.
Change-Id: I190df271a6b83fafeec0b281cd4ee7cf13d7e7db
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This driver can be used for multiple boards based on the Quark
microcontroller family, the exceptions are Quark X1000 and Quark D1000.
Change-Id: I4c6624293515e4bbf31ac94a7f57905b4a9ef13d
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This introduces the pinmux_dev driver for the Atmel SAM3X.
This driver implements what used to be the pinmux driver API, which
applications could use to modify the function of pins during runtime.
That functionality is now protected under the CONFIG_PINMUX_DEV option,
which should only be set during the early enabling of a new board, as
there is risk of damage to the board when misused.
Change-Id: I3aa00505d2771b53c41fe687c3e5230e804756be
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Setting the direction of a GPIO pin is not the responsibility of the
pinmux "board" initialisation. This should be left for the GPIO
utilising application.
Some macros that were only used when setting the pin direction are
removed.
Change-Id: I5b63d52446a27fe539c89f0639a8dcadf5ea9f80
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This driver doesn't provide any API, it only initializes the pinmux
controller to appropriate values depending on the board.
The first board to use this new infrastructure is the Arduino 101 board,
because it is alphabetically the first.
To better organize code for the different SoCs and boards, a "family"
level is created in the 'drivers/pinmux' directory. The Arduino 101
board is part of the Quark MCU "family".
The PINMUX_DEV configuration (and functionality) is removed for now, it
will be added back when the pinmux_dev drivers are (re)introduced, with
clearer semantics.
Change-Id: Idf5cc3caf6be620aa50828ae8fdc535df6caf458
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Moves config options for K64 into its own config file under its
own submenu.
Change-Id: I94ccac54709ab5ec8222daa8634818d9ebc3561d
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
Add necessary integration code enabling use of common STM32 pinmux
driver.
The alternate function listing currently consists of USART1 pins
only. The listing should be updated when support for more devices is
added.
Change-Id: Ic65aeea9df9aaea7636ecdd6996f56e6ef59dc2f
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a common driver for pin control subsystem in STM32 MCU series. The
driver allows for selection of pin's function without the ability of pin
remapping.
The driver implements a pinmux driver API, with custom `func` and `pin`
encoding in API calls. The caller is expected to use STM32PIN() helper
macro for encoding port/pin numbers or using one of the provided
STM32_PIN_* defines.
The common driver requires SoC specific support to be implemented. The
SoC code must implement these calls: stm32_get_pin_config(),
stm32_get_port_clock(), stm32_pin_configure(). Consult pinmux_stm32.h
header for detailn on semantics of these calls.
The driver also requires board level integration. The call
stm32_board_get_pinconf() is expected to privide pin function
assignments for the target board.
Whenever an IO pin is being enabled, the driver will automatically
enable the clock for corresponding port. The driver does not implement
disabling of port's clock as this has potentially disruptive, as such
such operation should be done explicitly in the code.
The pin control module needs to be initialized before any other modules,
but after clock_control. For this reason, the driver is initialized by
default at PRIMARY level, with priority set to 2. The priority can be
changed through configuration.
Change-Id: I8cb746d0f3cad72cd50b3355fe6d93a9f469be25
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This patch replaces all occurences of the macro DEV_NOT_CONFIG by
-EPERM at the driver level. This patch is part of the effort to
transition from DEV_* codes to errno.h codes.
Change-Id: I3054c8aa76319a58a2eec089b8a72bf301c85391
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_NO_ACCESS by
-EACCES at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Ic7fd162b45e9ceb73141a164649b96eea9886873
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_CONF by
-EINVAL at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: Idae0d5af8dd780416977c9261a5fb6188c3aab64
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_INVALID_OP by
-ENOTSUP at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I46aec3c65963018c479b01602e4a3eec8650eaff
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
All driver APIs (i2c, spi, gpio, etc.) return 'int' type, but pinmux
APIs. So this patch changes the returning type from 'uint32_t' to
'int' from include/pinmux.h and fixes all pinmux drivers according.
Besides keeping consistency between all drivers APIs, this patch is
also applicable for the errno.h code transition. Pinmux drivers will
return negative errno.h codes so returning 'int' is more suitable
than 'uint32_t'.
Change-Id: I2a6e92d567a0e21fec363226da6197df94657d4b
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This makes sure the CONFIG_GPIO_K64F_* kconfig options have correct
dependencies. Or else CONFIG_GPIO_K64F can be disabled, but all
the CONFIG_GPIO_K64F_{A,B,C,D,E} are enabled.
Same goes for SPI, FTM and pinmux.
Change-Id: I8d225dea714081b14b19006d61b8f3f6afafa5ee
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Kumar Gala