Introduced by commit 01d6f9f5ee0867f6ee8dc1506c2ebe62d9f296bb
Reported by Gustavo Lima Chaves
Change-Id: Ic29c33f4339c83a55ca45e93000cbc07b8dadbd2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introduced by commit a6873a00d816daf303b0380dda91accd28df6497
Reordering the irq config function, and removing useless parameter.
Change-Id: I2d22cfe81153b104044d8672dd57115138437ed9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch introduces the QMSI I2C driver which is simply a shim driver
based on I2C driver provided by QMSI BSP.
This initial version supports only I2C_0 controller in 'master' mode.
Due to some issues with qm_i2c_master_irq_transfer API, the driver uses
the polling APIs from QMSI. This means that the current thread doesn't
sleep (i.e. is not scheduled out) while the I2C transfer is carried out.
The qm_i2c_master_irq_transfer() issue is under investigation.
Below follows the missing features which will be addressed by a new
version of this patch or by upcoming patches.
* Block the current thread until the I2C operation has actually
completed.
* Add support for multiple controllers.
* Add support for slave mode.
* Add support for suspend() and resume() APIs.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_I2C=y
CONFIG_I2C_QMSI=y
Finally, due to the lack of proper support for Quark SE in QMSI 1.0.0,
this driver requires QMSI version greater than 1.0.0.
This driver has been tested only with Quark SE based boards.
Change-Id: I369992c7b5fe37f7e0b45be7f19e667ad1fca9ac
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
NBLE defaults (eg for BLUETOOTH_MAX_PAIRED) were not limited to
!BLUETOOTH and resulted in overwriting BLUETOOTH defaults.
Change-Id: I1e4a90c00c15252bb3db927b42641f9a479f4aa6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Select cannot be used for int type of variable. This will stil work
correctly as default value is provided. Fix following:
drivers/nble/Kconfig:50:warning: 'BLUETOOTH_MAX_PAIRED' has wrong type.
'select' only accept arguments of boolean and tristate type
Change-Id: I15951a3ba9efa11e1c18a1e90eb708ced08ad357
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This converts the i2c_quark_se_ss to use the static IRQ API.
Note that, even with separate config functions for each instance of
the driver, it is still saving both RAM and ROM space.
Change-Id: Ieb555ff281b384d87d8e69f6914878bbee0e2ee9
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
An application will not care about the implementation and will want
to only reference a well define name for the IP, the configuration
system will take care of the rest.
And application will bing to the drivers this way for example:
dev = device_get_binding("WATCHDOG");
Change-Id: I8a0fde34602320de643a0ad911d19c9985600e7e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This makes it easier to port samples which may use
CONFIG_BLUETOOTH_MAX_PAIRED.
Change-Id: I3e37df7cae63a4ac2219ce26408ae4d4f987645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add API definition and stubs for directed advertising.
Change-Id: Ib22d3acb6d2e76b0c638b26b8e07860cd189f640
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To have some proper split of conn.h and bluetooth.h APIs make sure all
bt_conn related ones are in conn.h. This also helps avoid forward
declarations for some upcoming patches where we need bluetooth.h
defines from within conn.h.
Change-Id: Ief3d32118a6749fb5785dab6cb3fee4ebb86ddb4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The authentication APIs may fail, so it's fair to give the application
a chance to catch these errors.
Change-Id: I323df86b94a823b201fe22d412e6bbcaa9029550
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update the advertising API according to what has recently been
discussed and agreed upon.
Naming-wise the most important change is the removal of "EIR" which
was confusing since this is mainly used with LE at the moment. The
Core Specification Supplement consistently uses the generic terms data
and data type to describe what we're dealing with here, so the new
names are bt_data and BT_DATA.
Another change is to detach the actual data from the struct by
converting it from an array to a pointer. This is not only essential
for supporting BR/EDR (which has a different length) but to also
minimize memory usage.
Another change is to require the caller of bt_le_adv_start() to
provide the array lengths of the ad and sd paramters. This way we
don't have to have the empty (8-byte) element at the end of each
array.
Lastly, the bt_le_adv_start() logic is slightly modified so that it
will always clear the respective data if necessary. Previously the
user might have been left with a previous callers data if it passed
NULL to the API.
Change-Id: I318026ceb1b52bb688edf4dcfed82613bd15c3e1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce the basic skeleton for NBLE, which is the Bluetooth LE API
implementation targeting a custom firmware running on Nordic
Semiconductor nRF51 chips.
Change-Id: I1ce69d6ee0205e71f6bd8d256d9233c93d2cde41
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In ISR context we receive NULL when there is no free buffers available.
Add handling similar to H4.
Change-Id: I9c1c2784ceaf31a1b2f9433b142a342e8dcdbc3e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move rx state to the h5 struct and use a commmon h5_reset_rx() helper
to reset it.
Change-Id: I92af740ae26b443460531b7200dbb0e64fb11d64
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The handling of SIGNAL and PAYLOAD states is exactly the same. Just
remove the other one.
Change-Id: Id82524812919658c6b1df76a7081c826aaf3df34
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When packet is retransmitted we need to recalculate sequence number
since it is not stored in the packet buffer.
Change-Id: Id389fa814e82cfd5e39afba1eaeaa79fc9e337f1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case of unexpected SLIP_DELIMETER we need to discard remaining
bytes in UART and start from beginning.
Change-Id: Ib13a885cc1a4a188057c587e9974aff1d90594c3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The driver has to implement the logic in an interrupt based manner.
Applying the changes to the existing drivers.
Changing ADC's API and implementation as well to follow those changes.
Change-Id: Ie0c3e3e318f619ade6be935adb064a25446cc29c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The casting was wrong, resulting in setting only on of 2 slots.
Taking the opportunity to make thing a bit cleaner on the header side.
Change-Id: I3aa90b5f251f3c5aa756681425bb8ab07e3da1b5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch moves the config options I2C_STATUS_DELAY, I2C_CLOCK_SPEED
and I2C_DEBUG to the top of the Kconfig file. These options are
independent of the device driver and should be placed together with
option I2C_INIT_PRIORITY which is also independent.
Change-Id: I2297f4c31c0106a0d80fbaa9b4e5be0488b84732
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This was never implemented on ARC/ARM and has been superseded
by irq_offload().
Some checks that were only done with CONFIG_LOAPIC_DEBUG fall
under the category of 'shouldn't ever happen' and have been
converted into assertions, instead of propagating return values
which are largely never checked.
Change-Id: I4eedca05bb7b384c4f3aa41a4f037f221f4a9cfe
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch introduces the 'QMSI RTC device driver' which is simply a shim
driver based on RTC driver provided by QMSI BSP.
Some config options are independent of the driver implementation used,
so use a consistent name for them. In this case RTC Interrupt number and
Priority use the same config options for both the QMSI and DesignWare
drivers.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_RTC=y
CONFIG_RTC_QMSI=y
Change-Id: I48292406e5472e5786f3b9abbeb71016a273bfec
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This patch introduces the QMSI watchdog driver which is simply a shim
driver based on watchdog driver provided by QMSI BSP. This driver has
been tested with the latest version of QMSI BSP (1.0.0).
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_WATCHDOG=y
CONFIG_WDT_QMSI=y
Change-Id: Id910fa7f8a0559bcd4746747d8ce4588a0c48589
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enables the driver to process the transmit abort signal
during send.
Change-Id: I3ad1f25669bee214b5e1a04cd858ccb4a8442333
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This actually makes the code to bail out when transmit is aborted
during send operation.
Change-Id: I3dda7ec4a6e15d1483738bb90d63d674a994903d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes to request bytes that will fill the RX FIFO
instead of requesting byte one-by-one.
Change-Id: I87c6577dc5fcc476284cd3ed0039a178a5221d24
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes to request bytes that will fill the RX FIFO
instead of requesting byte one-by-one.
Change-Id: I30696c624c9f828818f6df9f1ee744a5bc515f27
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
() Rolls the transfer initialization function into the setup function,
as it is logical to have just one function (not to mention there
was duplicate code).
() The setup function returns early if there is any error.
Change-Id: Ie9d3057f2963a0ba5b74ac66e058ff4fee31f099
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make the i2c_transfer() to transact messages through the I2C bus.
It is useful for I2C storage devices, as now we can send one message
containing the destination byte/block address, then send the data
in another message. There is no need to construct one continuous
data buffer to send both address and data anymore.
The drivers and sample apps have been updated to utilize updated
API when appropriate. For i2c_dw, only master mode has been updated.
Slave mode will be updated once we can adequately test it.
Change-Id: I0a811d60567367817fcc8d15f5454e5c933722e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes a build issue when CONFIG_I2C_DEBUG is turned on.
Change-Id: I8df72e41d0809f99c9c3855cbfcbc5abc60cbca1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are a few bits missing on enabling I2C controller on
quark_d2000_crb. This adds the missing bits.
Change-Id: I05bbe8367a9e69962db573d496f1f9f0167ba597
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch introduces the infrastructure required to enable QMSI drivers.
QMSI drivers are shim drivers based on drivers provided by QMSI BSP. The
BSP provides a static library (libqmsi) which implements several drivers
for peripherals from Intel MCUs.
Next patch will introduce the first QMSI driver (watchdog driver) which
will rely on the infrastructure introduced by this patch.
Change-Id: Ic7da5d0249af0629eef8c91d124a153f84d4a76e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tomasz Bursztyka