Drop these CMake comments. It is redundant with a below comment to
describe 'app', and it is incorrect to state that omitting
boilerplate.cmake is permitted/supported.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
We had an if-statement around policy 79 because we used to need to
support CMake versions before 3.13.0. But now 3.13.1 is the minimum
required version so the if statement always evaluates to true and can
be omitted.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Found via Coverity CID 191001: Control flow issues (NO_EFFECT)
This less-than-zero comparison of an unsigned value is never true:
"put_char(out, '}') < 0U".
Let's fix this check to be less than 1 instead as it should have
been originally.
Signed-off-by: Michael Scott <mike@foundries.io>
Adding OpenAVnu/gptp and linuxptp links to the doc.
Also the "Application interfaces" chapter had some style issues.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The doxygen comment for ieee802154_radio_api, net_l2 and
net_pkt structs was missing, which meant that no documentation
was generated for them.
Also add comment to "enum net_l2_flags" as that looks better in
the generated html file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Newly added net_context_send_new()/net_context_sendto_new() take
void *buf, size_t len params but in docstring, refer to "network
buffer", which is apperently copy-paste artifact.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We have a great number of samples now, using different port numbers,
etc. Let them be self-documenting and print out port number used.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The file was in two subfolders as copied from the FreeRTOS BSP
for i.MX6 and i.MX7. Unified the file and moved it into the
devices folder, like in the FreeRTOS BSPs.
Fixes: #13748
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
There was no notification about dropped logs When logger operated
in the mode where message is dropped when logger has no space to
store the message. Notification was printed only if logger operated
in the mode which overwrites oldest log.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added support for remote wakeup in hid_mouse example.
If rempote wakeup support is enabled, wakeup request
is performed on every button click when the bus in suspended state.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
This commit adds support for remote wakeup and extends USB api
with a wakeup request call. Remote wakeup can be dsabled in kconfig
when a specific driver does not support this feature.
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
To get u8_t value, just right shift the operands are enough.
Fixes#12298
Coverity-CID: 190635
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This makes use of BT_GATT_CCC_MANAGED so instead of having a custom
attribute which is not managed by stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code for finding a CCC config in a helper function
thus reducing the amount of duplicated code.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds another helper macro called BT_GATT_CCC_MANAGED which can be
used to set 2 new callbacks:
- cfg_write: Which application can set if it wants to manage writes to
CCC configuration.
- cfg_match: Which application can set if it wants to manage matching
CCC configuration when notifying/indicating.
BT_GATT_CCC_MANAGED retains the ability of saving peer configuration
on storage making it useful for clients which are only interrested in
managing the CCC configuration but not the storage itself.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
patch exclude the watchdog test case for quark_d2000_crb
,as it seen that upon watchdog reset the conents of ram are lost.
Hence the existing testcase fails.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same change as in commit 8cf8db3a73 ("Kconfig: Use a short, consistent
style for prompts"), fixing stuff that got introduced since then.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Reworked platform_whitelist to enable the "test kernel.device" for
qemu_x86_64
kernel.device.pm is not yet enabled for qemu_x86_64 because
there is a link error
undefined symbol `_DEVICE_STRUCT_SIZEOF'
referenced in expression
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
The IRQ defined in DTS has already been shifted so there is
no need to shift again in dts_fixup.h.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to fake IDT_BASE address, zephyr_prebuilt.elf is about 1.1GB
in size due to all the empty space between end of SRAM and IDT_BASE.
So move the IDT_BASE to the empty space just after SRAM. The section
will be discarded in the final zephyr.elf so it should not be a big
issue. After this change, zephyr_prebuilt.elf is now a bit smaller
than 5MB.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both Kconfig.zephyr and subsys/Kconfig 'source's
subsys/testsuite/Kconfig, giving multiple redundant identical
definitions for all the symbols in it.
Remove the 'source' in Kconfig.zephyr.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a missing semicolon after /dts-v1/, and a blank line between
/dts-v1/ and the root node.
Use 'code-block:: none' instead of 'code-block:: yaml' as well.
DTS is not YAML.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The connectivity API will now point to BSD socket API instead
of legacy connectivity API (net_context.h) when creating
a network application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
_impl__zephyr_write() was renamed to _impl__zephyr_write_stdout().
This wasn't caught by CI because we didn't have POSIX tests build
for newlib, but now we have.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On nrf52810_pca10040 board, the nRF52810 SoC is emulated on nRF52832.
This patch overrides for this board the number of cycles consumed by
one iteration of the internal loop in `nrfx_coredep_delay_us()` (used
by `k_busy_wait()`), so that the value adequate for nRF52832 is used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In the recent MDK brought by nrfx 1.6.2, these legacy peripherals have
been revealed as available also in nRF52810. This patch allows their
use in Zephyr drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a build variant of the posix tests with newlib enabled. Since the
interation of posix is greatly related to the libc we should have these
tests build with and without newlib support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In case newlib is enabled, but POSIX subsys isn't, there're adhoc
implementations of read() and write() which work only with adhoc
stdin/stdout emulation layer. These are backed by system calls named
like "read" and "write". Rename all these functions and syscalls to
explicitly mention stdin/stdout in the names, to free namespace
for the implementation of generic read/write syscalls which will
integrate with POSIX fdtable.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The i.MX RT1064 evk has one ethernet (10/100M) connector via KSZ8081RNB
phy. Enable related dts nodes and config flags
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
iMXRT1064 has 4MB on-chip Flash memory (flexspi2) mapped to 0x70000000.
Add it as configurable code location for MIMXRT1064-EVK board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When printk is used stack size expanding may be needed. This is
especially a problem for threads with small stacks.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Contrary to all other toolchains, the xcc toolchain had a hardocded
installation path. Replace this with XTENSA_TOOLCHAIN_PATH so users can
install in different locations.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The phrase 'low power state' is often incorrectly used to indicate
'low power' or 'deep sleep' states. This commit fixes the ambiguities
by renaming 'low power state' to 'power state' where necessary.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Sebastian Bøe