... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The board target for emulation of nRF52810 on nRF5DK, so far
known as nrf52810_pca10040, is renamed to nrf52dk_nrf52810.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove CONFIG_CONSOLE_HANDLER from project configuration. When building
for native_posix this produces the following warning:
warning: CONSOLE_HANDLER was assigned the value 'y' but gotthe value 'n'
Check these unsatisfied dependencies: SERIAL_SUPPORT_INTERRUPT (=n)
The shell works without this option since this is handled by the shell
itself instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disable the CONFIG_TEST_LOGGING_DEFAULTS Kconfig option which forces
immedate logging, since that is not compatible with Bluetooth and its
tests.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable controller filtering feature not used on mesh stack.
This reduces some RAM usage.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce a separate buffer pool for events which the HCI driver
considers discardable. Examples of such events could be e.g.
Advertising Reports. The benefit of having such a pool means that the
if there is a heavy inflow of such events it will not cause the
allocation for other critical events to block and may even eliminate
deadlocks in some cases.
Also update all mesh samples not to specify explicit RX buffer counts
anymore. Instead, create appropriate defaults in Kconfig so that we
only need to override this in the app for cases like the bbc:microbit
with limited memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Improvement in test case name is needed to make it easier
to navigate from test case name to the actual test
folder.
This is useful as some tools that consume tests directory
will only output test case name without directory names
Signed-off-by: Cinly Ooi <cinly.ooi@intel.com>
This makes use of BT_GATT_CCC_MANAGED so instead of having a custom
attribute which is not managed by stack.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This app was supposed to have userspace disabled, but it kept on being
forced on by CONFIG_TEST_USERSPACE (which in turn gets enabled by
CONFIG_TEST).
Also lower the shell stack size since stack analysis shows over 700
bytes being unused.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This implements the Database Hash characteristic which generates a hash
with the contents of certain attributes. The generation of hash is
usually offloaded to the systemwq using a delayed work so that when
application register multiple services only one hash needs to be
calculated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds common option to disable support for LE Data Length Update
procedure in controller and host.
This will reduce flash usage by compiling out le_data_len_change
event handler that will never be called if controller has been
compiled with BT_CTLR_DATA_LENGTH option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds common option to disable support for PHY Update
procedure in controller and host.
This will reduce flash usage by compiling out le_phy_update_complete
event handler that will never be called if controller has been
compiled with BT_CTLR_PHY option disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This makes mesh shell to register commands with the new shell subsystem
and stop using the legacy shell.
Fixes#11056
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The number of buffres influences e.g. the maximum SDU size, which in
turn influences call stack consumption. Use lower values where a high
number of buffers isn't necessary, and use the default (6) where it's
sufficient.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Exclude building the btshell and mesh_shell application for
NRF52810_PCA10040 boards due to limited RAM and Flash
availability on the nRF52810 SoC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case of split host & controller we may need to do ACL segmentation
of packets. Sending the composition data will already have allocated
three TX buffers, so trying to segment the first one further will
result in a deadlock. Increase the buffer count from the default (3)
to 4 to work around this risk.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some PTS test cases only work when we're advertising using Network
Identity. Using the default timeout of 60 seconds for Node Identity
will cause this test cases to fail (i.e. the PTS gives up before
Zephyr transitions to advertising from Node Identity to Network
Identity).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The generic Bluetooth shell was never intended to be enabled. Also
make the default advertised name a bit nicer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The qemu main() seems to require more stack than the arm equivalent.
Increase the stack size to 320 to avoid crashes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having a dedicated Mesh shell app instead of extending the existing
shell app will let us fine-tune board-specific configurations for Mesh
in the future (not to mention that extending the shell app already
resulted in it not fitting on some boards).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Marc Herbert