To prepare for supporting flexcan, can node should be
renamed to canxl to support both flexcan and canxl
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
The received messages are put into the FIFO one by one in the
order, the hardware will return the queue index for current
message. So use the index instead of reading always from 0.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
CONFIG_BT_CONN_TX_USER_DATA_SIZE is now used for callbacks in the host.
We don't want to limit ourselves to that, so change the wording to be
more generic.
In the future, the plan is to not use user_data at all, removing the
need for the kconfig altogether.
Also rename the structure that was referenced in the docstring.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
/zephyr/soc/intel/intel_adsp/ace/power.c:46:9: warning: implicit
declaration of function 'cache_data_flush_range'; did you mean
'sys_cache_data_flush_range'? [-Wimplicit-function-declaration]
46 | cache_data_flush_range((__sparse_force void *)
| ^~~~~~~~~~~~~~~~~~~~~~
| sys_cache_data_flush_range
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The symbol DCACHE_LINE_SIZE was not being defined in Intel ADSP
targets.
It fixes the following problem:
/zephyr/soc/intel/intel_adsp/ace/power.c:30:29: error:
'CONFIG_DCACHE_LINE_SIZE' undeclared here (not in a function); did you
mean 'XCHAL_DCACHE_LINESIZE'? 30 | uint8_t
adsp_pending_buffer[CONFIG_DCACHE_LINE_SIZE]
__aligned(CONFIG_DCACHE_LINE_SIZE);
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In SoC imxrt1010, edma channel has separate interrupt entry,
not like the rest of in-tree imxrt SoC series
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Power off the SD card in `DISK_IOCTL_CTRL_DEINIT`, instead of only
waiting for the card to be idle then doing nothing. This is a safer
state for `DISK_IOCTL_CTRL_DEINIT`, which is documented as preparing the
disk to be removed from the system. It also has the advantage of
lowering power consumption while de-initialized.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This commit ensures that the state of the address can be changed from
the Deprecated state to the Preferred state.
Additionally, an issue with improper memory comparison size for the mesh
local prefix has been fixed.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
The .bin & .hex build output is optional and can be disabled by
CONFIG_BUILD_OUTPUT_BIN/HEX.
Add support for the mandatory .elf build output
to the jlink runner flash command.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Added the battery level status char to bas service
as per bas_1.1 spec. Added BSIM test for BAS service
to test the NTF/INDs of BAS characteristics.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
dhcv4 server was not providing the dns server details to the
client because dns option was handled. Added the dns server
option to be send to the client as response form dhcpv4 server
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
Unfortunatelly new Qualification Workspace is not able to properly import
ICS if file is UNIX line endings.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To make the scanner module more understandable and more streamlined, I
reworked the update mechanism of the scanner. The scanner tracks now the
parameters that were used to enable it and the reason why it is running.
This facilitates state logic and allows other modules to "start the
scanner", altough it is already running.
This is mostly a refactoring and not a functional change.
Added a test to verify the behavior.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
add to task
A common question is how twister decides on which platform to run
a given test. Added section is meant to explain those rules.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The serial number for debugger selection over USB
can be selected with the dev-id. This change
reflects also more the workflow of west flash
with J-Link.
The usage of SelectEmuBySN breaks the support for
J-Link over IP with twister.
Signed-off-by: Michael Arnold <marnold@baumer.com>
sys_heap_validate() is in sys_heap.h API but it is available only when
CONFIG_SYS_HEAP_VALIDATE=y. Add empty implementation if option is
disabled.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Enables open loop operation when initializing into LRA mode. Open loop
operation is enabled by default for ERM mode. This is hard coded for LRA
mode because calibration is currently unsupported.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds "vib-overdrive-mv" device tree property to configure the overdrive
clamp at initialization.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds support for boot time configuration of the rated voltage at
initialization via "vib-rated-mv" devicetree property.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Adds the default value for the existing properties to the device tree
and fall back on those values at initialization if necessary.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Removes an unused enum defining the DRV2605 power states. This enum is
dead code so it is being removed.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Add the support of the reset-cmd property for the stm32h7 disco kits
where the quad-spi flash is mt25ql512ab
This device accepts the SPI_NOR_CMD_RESET_En/SPI_NOR_CMD_RESET_MEM
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Use the define to send the reset cmd at quad-flash init :
SPI_NOR_CMD_RESET_EN followed by SPI_NOR_CMD_RESET_MEM
when the st,stm32-qspi-nor has the <reset-cmd> property set.
Reports the jedecID correctly.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
MCUX ehci controller driver support cache maintenance if
USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE is enabled.
Enable USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE if
CONFIG_UDC_BUF_FORCE_NOCACHE is false and CONFIG_NOCACHE_MEMORY
is true.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
add reset control registers information (on RCC_BUS_RSTR LTDCRST bit)
for display peripheral reset.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Configures pins for the SPI instance attached to the Pmod connector to
enable using this board with the pmod_acl shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Adds a new shield definition for the Digilent Pmod ACL module. This
module provides support for an ADI ADXL345 3-axis accelerometer over a
Pmod SPI connector.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
The MBT server, as the MBT client currently sets the maximum chunk size
according to maximum supported segments in the accesss layer. This might
be suboptimal for some use cases.
The added Kconfig options give customers the option to fine tune it
themselves.
Future work will include addition of an API for the customer to modify
it also during runtime.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Add conn parameter to status/flags callbacks of bt_vcp_vol_rend_cb
to differentiate between remote and local changes.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Check if the frame is within the text address before saving
into the buffer, this eliminates the extra, uninitialized frame
at the end of the unwind.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Relocate stack unwind backends from `arch/` to perf's
`backends/` folder, just like logging/shell/..
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The timer & dwork can be statically initialized,
SYS_INIT is not strictly required.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Tu Nguyen Van