This adds the Kconfig option to specify default configuration
for the I2C controller during driver initialization.
During boot, the controller needs to be configured before
communication to slave devices can start. After boot,
an app can re-configure the controller if needed.
Change-Id: I7bf252f75a31943ae444e4d914f3a9a1a3f3d91f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are devices that need are part of the architecture core the need
to be initialized prior to devices that are integrated around a core
to make up a complete SOC. Namely the interrupt controller in the SOC
must be configured in order to allow the integrated IP blocks drivers
to initialize correctly.
Change-Id: I0a91e08f98516a7b7dd402ffc6494a071f1326b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Following the naming convention established, private functions
should be prefixed with an _
Change-Id: Ib6006ba3a928da88b8b8c3324f7d4b833f736270
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Many of the i2c functions continue to exist in a format of
<IP>_<interface> and will now follow the <interface>_<IP>_
naming convention.
Change-Id: Ic7ec879105f5c06f0213f8d771b3811253c49658
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Clearing an interrupt in DesignWare is done by reading the port
not by writing to it. Original problem found by Dmitriy@WR.
Change-Id: I1de052632ec36e2d496c563e81307169e9dabcf4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The header file was renamed in previous commits, but the #include
referred to a non-existing file. This causes compilation error.
This uses the correct file.
Change-Id: Ibda7dbca82323d99dcff71cbee8f642f6cd611d6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes variables readable and consistent with other drivers
we have.
Change-Id: I816f133279497eafd5d5614013c8d224d5909590
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver naming is an exception which compared with all other drivers
we have. To keep things consistent the configuration options and variables
are renamed to <type>_<name>.
Change-Id: Ib95aa09630a507848f78d8f2c28706b545eed06d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was missing an include file, which caused the macro to not
be expanded correctly. Including init.h fixes the issue.
Change-Id: I6b190e0c75828d9b6eb42a84c213dfc174510740
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The code fragment to bind the instances of the I2C driver is not
platform specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: I9ea132c9340437ccb292bb8f3fa3d3a2b2a794db
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since such controller is found on Quark x1000 (Galileo, ...), it will
need to get configured and/or enabled through PCI.
Change-Id: I16d00364edcb17653eaaf073e87b4e5850de7299
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using the OS provided sys-io functions for access to the registers
and lower level devices.
Change-Id: I1a88786189cbed0965f84146ffad9988a3b68a7b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Daniel Leung