Per ZEP-1958, Phase 2 of adding CC3220sf LaunchXL support,
was to "deprecate the CC3200 launchxl support in Zephyr
(redundant to the CC3220)."
Effectively, the CC3220 SOC replaces the CC3200.
This patch removes the following:
* the imported CC3200 SDK
* CC3200 SOC, board, DTS files.
* adjusts other files where cc3200 was mentioned.
Also, it fixes explicit references to CC3200 in generic
CC32xx driver files.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The SimpleLink host driver comes with its own definition of
__errno, which conflicts with Zephyr's definition, but has
a mechanism to enable use of the porting OS's __errno variable.
This patch enables SimpleLink to use Zephyr's __errno
via the DPL porting layer.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This ports the SimpleLink WiFi host driver via its OS adaptation
layer to Zephyr OS primitives.
This was validated using an out-of-tree SimpleLink shell
application including functions for:
* WLAN connect, disconnect and scan
* Socket: UDP server and client
* NetApp: pinging an external host.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This patch enables and builds the SimpleLink host driver
for Zephyr introduced in a previous patch.
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The SimpleLink SDK provides a WiFi host driver to access the
network coprocessor over a dedicated SPI.
This patch imports the host driver plus other driver files
required to communicate with the network coprocessor.
All files have been copied from a Linux SDK installation, without
modification (except for whitespace cleanup and file mode fixes).
Note that one of the imported files, wifi/porting/user.h, has to
be modified to enable the DPL (Driver Porting Layer) port to Zephyr.
This is provided in a follow-on DPL porting patch.
Origin: Texas Instruments SimpleLink CC3220 SDK URL:
http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK Purpose:
Provide WiFi host driver for TI CC32XX SoC
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Adds a shim layer around the mcux ftm driver to adapt it to the Zephyr
pwm interface.
Jira: ZEP-2025
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Sample code such as the adc_simple driver test set a sampling delay of
12, however that caused this calculation to underflow so the real
delay came out to more like 65534.
Signed-off-by: Geoff Gustafson <geoff@linux.intel.com>
When integrating Zephyr in other environments to build for a specific
product or platform, we should be able to remove HALs that are not
needed and usually huge in size.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ReST defines interpreted text roles where text enclosed by single quotes
can be "intrepreted", for example :ref:`some name` becomes a link to
a label anywhere in the doc set named "some name", :c:func:`funcname()`
becomes a link to the API documentation for "funcname", and
:option:`CONFIG_NAME` becomes a link to, in our case, the documentation
for the generated Kconfig option.
This patch fixes uses of `some name` (without a role) by either adding
an explicit role, or changing to ``some name``, which indicates inline
code block formatting (most likely what was intended).
This is a precursor to changing the default behavior of interpreted
text to treat `some name` as :any:`some name` (as configured in
doc/conf.py), which would attempt to create a link to any available
definition of "some name".
We may not change this default role behavior, but it becomes an option
after the fixes in this patch. In any case, this patch fixes incorrect
uses of single-quoted text (possibly introduced because GitHub's
markdown language uses single-quoted text for inline code formatting).
Jira: ZEP-2414
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This mbedtls configuration creates support for DTLS. The values
are not optimized for RAM usage, but can be used for various
networking sample applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Version 0.2.7 of this library has been released on June 30th, and this
patch updates the library from version 0.2.6. A summary of changes
is available at the official repository at:
https://github.com/01org/tinycrypt/releases/tag/v0.2.7
There were some API changes in this version, so some tests are not
building: ccm_mode, ecc_dh, and ecc_dsa. Fixes to these tests and
subsystems affected by the changes will be provided.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a shim layer around the mcux adc16 driver to adapt it to the Zephyr
adc interface.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The SimpleLink SDK provides a peripheral driver library and hardware
register access header files for the Texas Instruments SimpleLink
CC3220S and CC3220SF SoCs.
This patch updates the SDK version in Zephyr from 1.30.01.03
to 1.40.00.03.
The SDK can be downloaded from:
http://www.ti.com/tool/download/SIMPLELINK-CC3220-SDK
Jira: ZEP-1958
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a STM32 LL based driver for the RNG processor. The RNG processor
is a random number generator, based on a continuous analog noise, that
provides a random 32-bit value to the host when read. The RNG passed
the FIPS PUB 140-2 (2001 October 10) tests with a success ratio of 99%.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Add minimal interface for the KW40Z XCVR driver to match the one offered
in MCUX v2.2 by the KW41Z XCVR driver.
This is needed to reuse the KW41Z IEEE 802.15.4 driver on KW40Z.
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Add and update makefiles in order to build either the KW41Z or KW40Z
XCVR driver based on soc name.
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Update KW40Z files for building XCVR driver by adding the required
includes, removing unneeded ones and replacing OSA_EnterCritical/
OSA_ExitCritical with OSA_InterruptDisable/OSA_InterruptEnable.
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Import from Kinetis SDK v1.3 MKW40Z4_extension.h and fsl_bitaccess.h
which are needed to build the XCVR driver for KW40Z.
Origin: NXP Kinetis KW40Z Connectivity Software
Maintained-by: External
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Import the KW40Z XCVR driver from Kinetis SDK v1.3, which is needed
to setup the radio on the hexiwear_kw40z board.
Origin: NXP Kinetis KW40Z Connectivity Software
Maintained-by: External
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Current implementation of LL_SPI_TransmitData16 on F3/F7/L4 family
generates following warning:
"warning: dereferencing type-punned pointer will break strict-aliasing
rules [-Wstrict-aliasing]"
Besides being forbidden by rule, this cast is not needed, as register is
16 bits wide. Modification has been tested on L4 SoC.
stm32yyxx_ll_spi.h being included in soc.h file, warning is generated
at each compiled object, this commit allows a clean build.
This issue is referenced in ST and tracked under
reference 13359. Code will be updated on upcoming stm32cube updates.
Change-Id: I3ca54a81d849d4852eca86b52b6825b60e18b752
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Enabling the HAL and the LL flags duplicate definitions when
compiling in driver.
Since the i2c HAL is not needed, disable it.
This is a HAL issue that needs to be addressed (not zephyr)
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
This changes increases content buffer length
MBEDTLS_SSL_MAX_CONTENT_LEN to 1500 bytes so that we can use
this config for echo-client and echo-server network sample
applications which need to send bigger data than 1024 bytes.
Removing MBEDTLS_PEM_PARSE_C as we do not have any cert in PEM
format.
Place various MBEDTLS debug options behind CONFIG_MBEDTLS_DEBUG
Kconfig option which was introduced in previous commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add Kconfig option that can be used to enable various debug
options in mbedtls config file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the mbedtls heap is global for the whole device, enable it
during device startup if configured so. The heap size can be
set in config file. There is no default value for the heap as
that depends very much on application needs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Align stm32f1xx series clock driver to other parts of stm32 family.
Driver support both Connectivity and Density lines of stm32f1 series,
that are based on different Reset and Clock Control architectures.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32L4XX family
from version: V1.6.0
to version: V1.8.0
Add support for following soc:
stm32l496xx
stm32l4a6xx
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Provide 5 micro sec delay after power change to analog comparator to
get it stable. If delay is not given, we observed some instability and
it generates random interrupt.
Jira: ZEP-1438/ZEP-1927
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Atmel Software Framework (ASF) provides a set of low-level
header files that give access to different hardware
peripherals of Atmel's ICs.
Origin: Atmel SAM4S Series Device Support (1.0.56)
URL: http://packs.download.atmel.com/Atmel.SAM4S_DFP.1.0.56.atpack
Maintained-by: External
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
The SimpleLink SDK actually encapsulates a family of devices,
of which cc32xx is just one device. Other devices can fit
under this SDK directory structure.
This expansion will also allow the import of the WiFi
host driver and its driver porting layer in the future,
inserted at the correct levels in the SimpleLink SDK
directory heirarchy.
Follow the URL (ending in "#directory-structure") referenced in
ext/hal/ti/simplelink/README which explains the SDK structure,
and where devices fit in.
Jira: ZEP-1958
Change-Id: I16515d3e3779de0d55d3b1b8e25029609d1f66c3
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Nordic Semiconductor's Microcontroller Development Kit
provides a set of low-level header files that describe
the different hardware registers and peripherals of
Nordic ICs.
Origin: Nordic MDK 8.13.0 (nRF5x MDK for Gcc with 3-clause BSD license)
URL: http://www.nordicsemi.com/eng/Products/Bluetooth-low-energy
Maintained-by: External
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds a shim layer around the mcux lpsci driver to adapt it to the Zephyr
serial interface.
Change-Id: I024f1605e3194f34bb57e8a121900e05b3085a82
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit enables STM32Cube LL based driver for stm32f4 series.
This generic driver provides a unified API to clock driver for all
stm32 series.
LL API allows driver to be lightweight and to keep genericity across
stm32 family to ease further devlopment and maintenance.
Change-Id: Ie31ae8f433313787f9c9eda77de41925721d54dd
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update Cube version for STM32F1XX family
from version: V1.14.0
to version: V1.15.0
Add support for Low Level API on stm32f1 family
Change-Id: I8cb5fe2fd94be3a320e863c7b5ed59e4c2312e87
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Implement just the OSA_InterruptEnable and OSA_InterruptDisable functions
as only these two are needed to build the XCVR driver.
Jira: ZEP-2026
Change-Id: I49e0cedd3a2553a59b667a2b9945db6b8d0be0d2
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Import the XCVR driver from Kinetis SDK, which is needed to setup the radio
on the FRDM-KW41Z board. Also import EmbeddedTypes.h and the OSAbstraction
interface, as they are needed to build the XCVR driver.
Origin: https://www.nxp.com/webapp/sps/download/license.jsp?colCode=KW41Z-CONNECTIVITY-SOFTWARE-LIN
Maintained-by: External
Jira: ZEP-2026
Change-Id: Iee0acb2320f7bec887d8d2342772dde18b11b12f
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
These libraries allow publishing information to enable system profiling
when using the SEGGER SystemView tool. This tool provides a way to record
and visualize events such as threads scheduling, interrupts, and can help
find unintended interactions and resource conflicts. More information can
be obtained from SEGGER website at [1], including downloads for major
platforms.
[1] https://www.segger.com/systemview.html?p=1731
Jira: ZEP-1463
Origin: https://www.segger.com/systemview.html?p=1731
Change-Id: I04f5897690089dc8a8fb4ae60726fe3a022b7a30
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Gil Pitney