The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The test starts the last one: after the driver and the net stack.
However, the net stack (due to DAD and else) will already try to send
some packet, resulting it giving a uninitialized semaphore. But once
properly initialized, this semaphore will end up with a non-zero count
when the test will start: thus reseting it to 0 before running the
tests.
Jira: ZEP-2319
Reported-by Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Build issues caused by commit fe882f407d
which missed camel case conversion of _TimestampOpen, _TimestampRead,
and _TimestampClose.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enabled the boot_time test on ARM SoCs, set __start_time_stamp on ARM
since we don't have a free running counter similar to TSC on x86.
Also moved to printing the values out as %u to increase the range of
values.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The shell tests were limited to running on just qemu_x86 platform, we
can run them on any platform with UART_CONSOLE support so move to using
a filter.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
Where possible, replace the use of filter with newly added keywords.
This will speed things up and in some cases add more coverage due to bad
filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In added mode flash operation are performed in timeslice
(in radio idle time).
Kconfig for mode enabling CONFIG_SOC_FLASH_NRF5_RADIO_SYNC.
Erase and write API implementations were rewritten and preserved against
concurrent execution.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new GATT service registration API is bt_gatt_service_register(),
which takes a bt_gatt_service object pointer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use sizeof instead of strlen to get the correct buffer
length and initialize rx buffer with zeros before the dma
transfer.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
commit d859295be9 ("tests: protection: convert to testcase.yaml")
removed testcase.ini but did not add an equivalent testcase.yaml.
Add it.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Add a self-protection test suite with a set of tests
to check whether one can overwrite read-only data
and text, and whether one can execute from data,
stack, or heap buffers. These tests are modeled after
a subset of the lkdtm tests in the Linux kernel.
These tests have twice caught bugs in the Zephyr NXP MPU
driver, once during initial testing/review of the code
(in its earliest forms on gerrit, reported to the original
author there) and most recently the regression introduced
by commit bacbea6e21 ("arm: nxp: mpu: Rework handling
of region descriptor 0"), which was fixed by
commit a8aa9d4f3d ("arm: nxp: mpu: Fix region descriptor
0 attributes") after being reported.
This is intended to be a testsuite of self-protection features
rather than just a test of MPU functionality. It is envisioned
that these tests will be expanded to cover a wider range of
protection features beyond just memory protection, and the
current tests are independent of any particular enforcement
mechanism (e.g. MPU, MMU, or other).
The tests are intended to be cross-platform, and have been
built and run on both x86- and ARM-based boards. The tests
currently fail on x86-based boards, but this is an accurate
reflection of current protections and should change as MMU
support arrives.
The tests leverage the ztest framework, making them suitable
for incorporation into automated regression testing for Zephyr.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
ztest provides a ztest_test_fail() interface to fail the currently
running test, but does not provide an equivalent ztest_test_pass().
Normally a test passes just by returning without an assertion failure
or other call to ztest_test_fail(). However, if the correct behavior
for a test is to trigger a fatal fault (as with tests/kernel/fatal or
protection or MPU tests), then we need a way for the test to pass the
currently running test before aborting the current thread.
Otherwise, ztest hangs forever in run_test() on the
k_sem_take(&test_end_signal, K_FOREVER) call. Add
a ztest_test_pass() interface and implement it for kernel and
userspace variants of ztest. This interface will be used in the
protection tests.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
It is confusing if we print timeout error when expecting
a timeout to happen. So for timeout test, do not print
an error message as the timeout is suppose to happen.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP tests had several failures because of unnecessary
Kconfig options. These are now fixed and the TCP tests are
also run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MLD (Multicast Listener Discovery) tests had a failure.
This is now fixed and the MLD tests are also run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 tests had failures and the tests did not pass
properly. These are now fixed and the tests are also
run automatically by CI.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This initial commit adds the following:
* Handling of privacy HCI commands
* New Link Layer filter module for both whitelist and resolving list
* Advertising RPA generation with timeouts
Follow-up commits will expand the functionality.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is unmaintained and currently has no known users. It was
added to support a Wind River project. If in the future we need it
again, we should re-introduce it with an exception-based mechanism
for catching out-of-bounds memory queries from the debugger.
The mem_safe subsystem is also removed, it is only used by the
GDB server. If its functionality is needed in the future, it
shoudl be replaced with an exception-based mechanism.
The _image_{ram, rom, text}_{start, end} linker variables have
been left in place, they will be re-purposed and expanded to
support memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Johan Hedberg