Commit Graph

11 Commits

Author SHA1 Message Date
Jay Vasanth ccb77af3b7 eeprom: Add Microchip eeprom driver skeleton
Prepare for Microchip eeprom driver addition. Update
dtsi, kconfig, cmake and relevant soc files for eeprom
driver addition.

Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
2022-08-04 18:36:18 +02:00
Guillaume Lager 972e5d0274 sensor: eeprom: Add TMP116 EEPROM access
eeprom access is supported by using
either custom or eeprom API

Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
2021-12-08 07:51:46 -06:00
Laczen JMS 232272cff8 drivers: eeprom: EEPROM emulation in flash memory
This driver emulates a EEPROM device in flash.

Reworked implementation with modified flash layout.

The emulation represents the EEPROM in flash as a region that is a
direct map of the eeprom data followed by a region where changes to
the eeprom data is stored. Changes are written as address-data
combinations. The size of such a combination is determined by the
flash write block size and the size of the eeprom (required address
space), with a minimum of 4 byte.
The eeprom page needs to be a multiple of the flash page. Multiple
eeprom pages is also so supported and increases the number of writes
that can be performed.

The eeprom size, pagesize and the flash partition used for the eeprom
are defined in the dts. The flash partition should allow at least two
eeprom pages. For fast read access a rambuffer can be enabled for the
eeprom (by setting the option rambuf in the dts).

Signed-off-by: Laczen JMS <laczenjms@gmail.com>
2021-02-19 14:06:15 +01:00
Simon Guinot 319d9d94a8 drivers: eeprom: add driver for NXP LPC11U6X
This patch adds adds an EEPROM driver supporting the on-chip EEPROM
found on NXP LPC11U6X MCUs. Note that this driver is only a wrapper
relying entirely on the IAP (In-Application Programming) EEPROM
commands.

Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
2020-07-29 20:12:24 +02:00
Laczen JMS ab3ed439c8 drivers: eeprom: Unified simulator and native_posix
EEPROM simulator and native_posix have been unified to one solution,
the old eeprom,native_posix is removed.

Signed-off-by: Laczen JMS <laczenjms@gmail.com>
2020-01-09 20:28:19 +01:00
Laczen JMS 20623dfa4c drivers: eeprom: Add support for eeprom simulator
Add support for a eeprom simulator. The PR limits the addition to
qemu_x86 but it can easily be added to other devices by defining the
eeprom simulator in the dts and setting 'CONFIG_EEPROM_SIMULATOR=y'

Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-01-09 20:28:19 +01:00
Kwon Tae-young 69924b19c8 drivers: eeprom: add driver support for EEPROM of STM32L1
Could not find a supported LL with EEPROM.
So I used HAL.

Tested with: 96b_wistrio

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2019-12-12 07:57:33 -06:00
Henrik Brix Andersen 4c9a1c59fe drivers: eeprom: add driver for Atmel AT24 I2C and AT25 SPI EEPROMs
Add driver for Atmel AT24 (and compatible) I2C along with Atmel AT25
(and compatible) SPI EEPROMs.

Tested with: AT24LC025, AT24C256, AT25AA02E48, and AT25080.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-11-07 16:32:15 -05:00
Henrik Brix Andersen a54c945ddd drivers: eeprom: add driver for a zephyr native posix EEPROM
Add driver for emulating an EEPROM device using the native POSIX
board. The EEPROM is backed by a binary file in the host file system.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-11-07 16:32:15 -05:00
Henrik Brix Andersen 4d4d4cd0b0 drivers: eeprom: add EEPROM shell commands
Add shell commands for reading from and writing to an EEPROM device.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-11-07 16:32:15 -05:00
Henrik Brix Andersen a2a7b776cb drivers: eeprom: add API for EEPROM devices
Add API for accessing Electrically Erasable Programmable Read-Only
Memory (EEPROM) devices.

EEPROMs have an erase block size of 1 byte, a long lifetime, and allows
overwriting data on byte-by-byte access.

Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
2019-11-07 16:32:15 -05:00