Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all arch code to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When XIP is not enabled, z_data_copy() already falls back to an empty
function. No need to ifdef it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Both operands of an operator in which the usual arithmetic
conversions are performed shall have the same essential
type category.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This changes to use stack to store registers before calling thread
switch instrumentation functions, instead of using the thread's
register saving struct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We should not be initializing/starting/stoping timing functions
multiple times. So this changes how the timing functions are
structured to allow only one initialization, only start when
stopped, and only stop when started.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
MISRA-C wants the parameter names in a function implementaion
to match the names used by the header prototype.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
arch_new_thread() passes along the thread priority and option
flags, but these are already initialized in thread->base and
can be accessed there if needed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This operation is formally defined as rounding down a potential
stack pointer value to meet CPU and ABI requirments.
This was previously defined ad-hoc as STACK_ROUND_DOWN().
A new architecture constant ARCH_STACK_PTR_ALIGN is added.
Z_STACK_PTR_ALIGN() is defined in terms of it. This used to
be inconsistently specified as STACK_ALIGN or STACK_PTR_ALIGN;
in the latter case, STACK_ALIGN meant something else, typically
a required alignment for the base of a stack buffer.
STACK_ROUND_UP() only used in practice by Risc-V, delete
elsewhere.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel z_setup_new_thread() calls into arch_new_thread(),
which calls back into the core kernel via z_new_thread_init().
Move everything that doesn't have to be in z_new_thread_init() to
z_setup_new_thread() and convert to an inline function.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The set of interrupt stacks is now expressed as an array. We
also define the idle threads and their associated stacks this
way. This allows for iteration in cases where we have multiple
CPUs.
There is now a centralized declaration in kernel_internal.h.
On uniprocessor systems, z_interrupt_stacks has one element
and can be used in the same way as _interrupt_stack.
The IRQ stack for CPU 0 is now set in init.c instead of in
arch code.
The extern definition of the main thread stack is now removed,
this doesn't need to be in a header.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add TRACING_ISR Kconfig to help high latency backend working well.
Currently the ISR tracing hook function is put at the begining and
ending of ISR wrapper, when there is ISR needed in the tracing path
(especially tracing backend), it will cause tracing buffer easily
be exhausted if async tracing method enabled. Also it will increase
system latency if all the ISRs are traced. So add TRACING_ISR to
enable/disable ISR tracing here. Later a filter out mechanism based
on irq number will be added.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
z_set_thread_return_value is part of the core kernel -> arch
interface and has been renamed to z_arch_thread_return_value_set.
z_set_thread_return_value_with_data renamed to
z_thread_return_value_set_with_data for consistency.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We introduce a new z_fatal_print() API and replace all
occurrences of exception handling code to use it.
This routes messages to the logging subsystem if enabled.
Otherwise, messages are sent to printk().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Gerard Marull-Paretas