Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This symbol is not user-configurable (has no prompt), so assignments in
prj.conf have no effect on it.
(It has no defaults either, and isn't selected/implied, so nothing in
vanilla Zephyr will ever enable it.)
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
There were various flaws in it that motivated its removal:
- No hash collision handling mechanism. In case that would happen, the
behavior of the network connection would be unknown. This is the main
drawback
- The lookup is not that much more efficient than the default one. The
only difference of gain is in connection comparison (a u32t comparison
vs a full connection compare). But the list handling is the same. It's
made worse by the presence of a negatives match array which can be
easily filled in and becomes then fully usless, appart from consuming
CPU. As well as adding a new connection: it requires the whole cache
to be cleared which is unefficient.
- Not memory efficient, even compared to a proper hash table.
Two arrays instead of one etc...
All of this could be fixed by using a proper hash table, though it
remains to be seen if such object could fit in Zephyr core.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add more Kconfig options to prj.conf file. In the future we need
to compile also in other hw than qemu_x86 in which case we need to
create separate test cases for those configurations.
Fixes#15282
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Many tests use either Ethernet or Dummy L2 and as such require
modifications towards the driver API on their fake devices.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Run networking tests for native_posix, qemu_x86 and qemu_cortex_m3
platforms only as the tests are generic enough so no need to run
them in real physical device.
Fixes#9623#9614#9622#9621#9618
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
DNS_RESOLVER_MAX_SERVERS has the range [1,NET_MAX_CONTEXTS], with
NET_MAX_CONTEXTS being set to 4, but is set to 5. Out-of-range .config
values are ignored, so the symbol reverts to its default value (1).
Increase NET_MAX_CONTEXTS to 5. DNS_SERVER{1-5} being set probably
implies that DNS_RESOLVER_MAX_SERVERS shouldn't be decreased to 4.
This fixes two Kconfig warnings (out-of-range + didn't get assigned
value).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These symbols were renamed by commit bf964cdd4c ("net: Renaming net
nbuf API to net pkt API").
Update the assignments to use the new names.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_TCP_{TIME_WAIT,2MSL_TIME} were replaced by
CONFIG_NET_TCP_TIME_WAIT_DELAY in commit 89f57c225a ("net:tcp: Define
single condig option for TIME_WAIT delay"), which also switched from
seconds to milliseconds for specifying the delay.
Remove the old assignments and set the new symbol to give the same
behavior as before.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CONFIG_NET_RPL_MC_ETX was misspelled as "..._EXT".
CONFIG_NET_RPL_MC_{NONE,EXT,ENERGY} are choice symbols. Setting a choice
symbol to 'y' implies that none of the other choice symbols are
selected, so remove the 'n' assignments and keep just the
CONFIG_NET_RPL_MC_ENERGY=y assignment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Drivers will be directly contacted via net_if's offload attribute. No
need for a an extra layer as an L2.
Signed-off-by: Dario Pennisi <dario@iptronix.com>
Signed-off-by: Massimiliano Agneni <massimiliano.agneni@iptronix.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This should clear up some of the confusion with random number
generators and drivers that obtain entropy from the hardware. Also,
many hardware number generators have limited bandwidth, so it's natural
for their output to be only used for seeding a random number generator.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
There were bunch of config options in tests/net, net-shell and
wpan_serial sample, and those options had wrong name so they
were ignored by the code.
Fixes#1428
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This enables IPSP node role which requires IPSS GATT service to be
registered.
Jira: ZEP-2451
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is a configuration that is unrealistic and used only to verify
Kconfig dependencies, trying to build this for every board fails due to
size limitations and due to unavailable device support on some of those
boards, building for qemu targets should be good enough.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In many networking tests we had to configure SLIP in the prj.conf
leaving those configurations Qemu specific. This change enables SLIP for
QEMU targets automatically and allows reuse of prj.conf for multiple
boards.
Additionally, the TUN options is removed. This option was not used
anywhere.
To enable self-contained networking tests that do not depend on SLIP, we
introduce the new option NET_TEST which disables TAP and allows testing
in QEMU without the need for a host interface.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
A number of the network tests have minimal memory requirements that not
all boards are able to meet. Add in those memory requirements so we
don't attempt to build these tests for those platforms. Utilized the
frdm_kl25z (with 16K of memory) and cc2650_sensortag (with 20K) to test
the limits.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Instead of only running net tests in qemu_x86, enable those
tests in all suitable platforms. The tests are disabled for
bbc_microbit as that platform does not have enough memory.
The tests/net/arp and tests/net/ieee802154/l2 are disabled
for qemu_xtensa as the qemu crashed when running the tests.
For tests/net/all there was a weird build error for qemu_xtensa
so that test is also disabled for that platform.
Increased the trickle timeout to 3 secs in tests/net/trickle as
occacionally there was timeout error in qemu_cortex_m3 when the
test was run.
Jira: ZEP-2398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The QEMU targets have plenty of RAM now and the current value
specified wasn't a multiple of a 4K page.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We have many testcases doing filtering both on the architecture level
and the platform level, which is redundant. Also many testcases are
running the same test twice on the same SoC for no good reason, cleanup
the tests and cleanup the filtering.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This tests enables all networking features and requires lots of RAM, so
increase the available RAM to avoid failures due to not enough RAM when
building.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Ulf Magnusson