Having these in the beginning of a switch statement without any case
statement makes no sense.
Fixes#6135
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix conditional compilation in nRF5 radio interface so that
when Coded PHY feature is not selected then it does not use
the PPIs required for supporting the feature.
This will allow pwm_nrf5_sw driver to use PPI channels 14 to
19 and support 3 PWM channels. Without the Coded PHY feature
disabled, only PPI 14, 15, 18 and 19 are available for PWM.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed a missing ticks unit to microsecond unit conversion
potentially caused incorrect window offsets being used while
establishing connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ticker timespace reservation can range up to 10.24 seconds,
needing 19-bits to represent in 32KHz clock units. Hence,
fix controller implementation to use u32_t to store ticks
slot values.
Without this fix, the controller is asserting in scan_adv
sample when using continuous scanning with 2 second interval
and window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the high frequency clock preparation advanced
feature to improve radio utilization during continuous
scanning.
The inter-event timespace value now considers the reserved
timespace while determining if the high frequency clock
will be retained. This reduces the preparation time, hence
increased radio use inside scan window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the invalid control PDU handling so as to reuse the
switch-case and hence, reduce code size and CPU time used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In preparation towards a refactored controller, rename the
old radio_*_is_enabled() function to ll_*_is_enabled().
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the controller implementation to handle Control PDUs
with invalid lengths by responding with Unknown Response
PDU.
Fixes LL.TS.5.0.2 conformance tests:
LL/PAC/SLA/BI-01-C [Control PDUs with Invalid Length from
Master]
LL/PAC/MAS/BI-01-C [Control PDUs with Invalid Length from
Slave]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup the use of long radio_pdu_node_rx and
radio_pdu_node_tx variable to shorter node_rx and node_tx
names.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the pdu_data_llctrl_phy_req_rsp struct into
pdu_data_llctrl_phy_req and pdu_data_llctrl_phy_req structs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the pdu_data_llctrl_length_req_rsp struct into
pdu_data_llctrl_length_req and pdu_data_llctrl_length_req
structs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements a minor refactoring of the implementation
for enabling the Radio on TIFS expiration. It inlines a function
that is defined in the local radio_nrf5_ppi header file.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes the implementation of the sw-switch for
tIFS in nRF5 Radio using the EVENT_TIMER instead of a dedicated
TIMER instance. A Kconfig configuration is added so the user can
select whether to use the EVENT_TIMER for the tIFS switch or use
a dedicated TIMER instance.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements minor refactoring of radio.c and ctrl.c,
to prepare for adding the implementation of sw-switch based on
the event timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the option of conditionally reuse an existing
CC register of the event timer for timer sampling used in ISR
profiling, in case SW tIFS switching is implemented based on the
event timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds a symbolic name for the event timer
CC offset that is used to sample the event timer during
ISR profiling.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor radio_nrf5* header files to group together
definitions and have less #if-#else-#endif.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Until now the OOB info and URI fields in unprovisioned beacons were
generally ignored by the implementation. Add fields for these to
bt_mesh_prov and make sure to take them into account when encoding
advertising data, both for PB-ADV and PB-GATT. For PB-ADV the URI goes
out in a separate beacon, whereas for PB-GATT it is placed in the scan
response data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix HCI LE Set PHY command for invalid behavior testing for
invalid parameters and unsupported features.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix generation of redundant length update event when no
change in effective octets or time.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-73-C [Master Data Length Update - Responding
to Data Length Update Procedure; LE 1M PHY]
LL/CON/MAS/BV-74-C [Master Data Length Update - Initiating
Data Length Update Procedure; LE 1M PHY]
LL/CON/MAS/BV-76-C [Master Data Length Update - Responding
to Data Length Update Procedure; LE 2M PHY]
LL/CON/MAS/BV-77-C [Master Data Length Update - Initiating
Data Length Update Procedure; LE 2M PHY]
LL/CON/SLA/BV-77-C [Slave Data Length Update - Responding
to Data Length Update Procedure; LE 1M PHY]
LL/CON/SLA/BV-78-C [Slave Data Length Update - Initiating
Data Length Update Procedure; LE 1M PHY]
LL/CON/SLA/BV-80-C [Slave Data Length Update - Responding
to Data Length Update Procedure; LE 2M PHY]
LL/CON/SLA/BV-81-C [Slave Data Length Update - Initiating
Data Length Update Procedure; LE 2M PHY]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed implementation to use Connection Parameter Request
Procedure Preferred Periodicity value in calculating the new
connection interval used by the master role in Connection
Update Indication.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-32-C [Accepting Connection Parameter Request –
Preferred_Periodicity]
LL/CON/MAS/BV-33-C [Accepting Connection Parameter Request –
Preferred_Periodicity and preferred anchor points]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The vendor variants of the model publication client messages were not
passing onward the CID, rather passing CID_NVAL which is clearly not
right.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix controller implementation to restrict HCI LE Set Random
Address command when advertising and/or active scanning
and/or initiator state is enable.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to support Connection Parameter Request
Procedure initiation with and without use of Feature
Exchange Procedure being performed in a connection.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/MAS/BV-81-C [Initiating Connection Parameter Request
- Unsupported Without Feature Exchange]
LL/CON/MAS/BV-82-C [Initiating Connection Parameter Request
- Unsupported With Feature Exchange]
LL/CON/SLA/BV-85-C [Initiating Connection Parameter Request
- Unsupported Without Feature Exchange]
LL/CON/SLA/BV-86-C [Initiating Connection Parameter Request
- Unsupported With Feature Exchange]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The timeout was hard-coded to 400ms, but the spec actually states:
"This timer shall be set to a minimum of 200 + 50 * TTL milliseconds."
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The caculation was wrong since the value may be BT_MESH_TTL_DEFAULT,
i.e. 0xff, leading to much too large values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replay protection is not enforced at the Lower Transport Layer, so it
is possible to get an old replayed segment here. In such a case
cleanly discard it instead of causing a valid existing transaction
from being discarded.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix controller implementation to only restrict HCI LE Set
Random Address command when advertising and/or active
scanning is enable.
Continues to pass the following LL.TS.5.0.2 conformance
test:
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed implementation to disallow setting Bluetooth device
address under active advertising or scanning states.
Fixes LL.TS.5.0.2 conformance tests:
LL/CON/INI/BV-01-C [Connection Initiation]
LL/SEC/ADV/BV-01-C [Advertising With Static Address]
LL/SEC/SCN/BV-01-C [Random Address Scanning]
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Conditionally compiled changes to the NRF52 HAL so it can
run on simulated HW on the native port.
(HW models are not included in this commit)
All changes are under ifdefs and therefore will not have any
effect on normal builds
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Refactor mayfly based execution context solution out into
the HAL folder. This opens up the possibility to use
tasklets (if and when kernel gets the support) style
execution contexts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes a bug where in Connection Parameter Request was
initiated by slave role while Encryption Setup had been
started by the peer master.
Fixes: #5823
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename some legacy upstream and downstream interfaces in
radio_* namespace to ll_* namespace for consistency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor Kconfig and CMakelists.txt to be able to
conditionally compile in BT_LL_SW variant in the controller
subsystem. This is done to support future controller with
vendor specific variant implementations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add conditional compilation and move code to support
building a non-connectable Bluetooth shell application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant code that clears NRF_RADIO->EVENT_*
registers that are only used in PPI context. Only EVENT_*
registers that are read back need to be cleared.
Relates to: #5753
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit implements the SW-based radio switch for TIFS for LE
Coded PHY S2 in nRF52840 with a single PPI channel and a single
TIMER CC register.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the radio enable on-tick functionality in
function hal_radio_enable_on_tick_ppi_config_and_enable() in
radio_nrf5_ppi.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Help text for BT_CTLR_DEBUG_PINS incorrectly mentioned
specific GPIO pins being reserved for this feature, but in
reality the pins reserved vary on the SoC selected, hence
any specific mention of pin details is removed from help
text.
Fixes: #5499
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix a missing !CONFIG_BT_CTLR_TIFS_HW conditional
compilation when nRF52840 is configured to use hardware
Trx switching, that caused compile error.
Fixes: #5779Fixes: #5761
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This check is needed to not schedule the delayed work if current
message to be sent is the last heartbeat message.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The timer should be reset before sending to ensure correct
publication period.
This patch allows to pass MESH/NODE/CFG/HBP/BV-02-C.
This patch is ported from mynewt:
Commit: d4b84638df47e7ea21629e6919f547f5dcd47285
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This commit refactors the nRF5 radio driver of Bluetooth controller
to use symbolic names for PPIs. It also revisits the Radio hardware
timing constants to align with experimental measurements.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Virtual address labels array entries were not updated on va deletion,
so that STATUS_INSUFF_RESOURCES error was returned after few
subsequent Config Model Subscription Virtual Address Add, Delete,
Overwrite commands, even if there shall be free space available.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing bt_mesh_lpn_group_del call in mod_sub_va_del.
If Config Model Subscription Virtual Address Delete was received
and successfully proceeded, subscription address shall be also
deleted from LPN Subscribe Groups.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Features received in Config Heartbeat Publication Set message can have
Feature bits set to RFU values.
This patch fixes setting this RFU bits in Heartbeat Publication
Features, so that those are not indicated in Config Heartbeat
Publication Status message.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This reverts commit ada5771d7c.
MESH/NODE/FRND/LPN/BI-02-C in Mesh Test Specification 1.0.1
has been fixed according to TSE #9774.
IUT shall ignore the message with an RFU Transport Control Opcode
but another Friend Poll message shall be sent with an alternating
FSN value.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
According to Mesh Specification v1.0 4.3.2.48 Config Model App Status:
"The Status Code shall be Success if the received request was redundant
(bind request of existing binding, or unbind of a non-existing binding),
with no further action taken."
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds commands to manage Friend node Subscription List.
Those will be used to add or remove and group/virtual address
from subscription list.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This command will be used to test if model can properly send
segmented and unsegmented messages to a given destination address.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add implementation to consider differing Rx chain delays for
S2 and S8 Coded PHY PDU reception. These changes are
required to meet tIFS timings for transmission after a
reception on S8 coding.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes many instances of errors similar to below:
zephyr/subsys/bluetooth/controller/ll_sw/ctrl.c:5927:22:
error: declaration of ‘s_link’ shadows a previous
local [-Werror=shadow]
static memq_link_t s_link;
^~~~~~
zephyr/subsys/bluetooth/controller/ll_sw/ctrl.c:5905:21:
note: shadowed declaration is here
static memq_link_t s_link;
^~~~~~
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This introduces Bluetooth internal API intended to be used for
qualification purposes. Application may register callbacks to get
data that is not exposed by public API.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When the controller is connecting to multiple connectable
advertisers, the events are scheduled consecutively avoiding
overlapping events. Calculation of the window offset did not
consider the preparation time before the event, causing the
new master role connection event to overlap with previous
event. This is now fixed by including the preparation time
in the used window offset from the end of connect_ind PDU
transmitted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixed the check related to initiating connection parameter
request procedure. This will avoid sending invalid repeated
dispatch of connection parameter request PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When connection parameter request procedure was responded
by master role with Unsupported Link Layer Parameter Value,
a missing reset of the connection parameter request
procedure state caused next connection parameter request to
be incorrectly responded with same procedure collision
extended reject ind PDU. This caused an eventual connection
disconnection with reason LMP response timeout. This is now
fixed by reseting the state correctly.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we have the maximum number of supported connections, then it
doesn't make sense to try to do connectable advertising.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Create a slightly smarter algorithm for choosing how long to advertise
each subnet. This is particularly important for the mesh_shell app,
since it uses a 10 second NODE_ID_TIMEOUT, meaning starting Node ID
advertising through user interaction would only succeed in advertising
one subnet (due to this being configured to 10 seconds).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Mesh Profile Specification 1.0 section 7.2.2.2.3:
"When the server starts advertising as a result of user interaction,
the server shall interleave the advertising of each subnet it is a
member of"
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Node ID advertising is short lived, so it's important to make sure
that subnets that get it enabled are first in queue to start
advertising.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We'll soon extend the start functionality with a bit more stuff
(prioritizing the started subnet), so in order to avoid excessive code
duplication, create helpers for these actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Until now the proxy server code would only advertise with the first
subnet. Introduce tracking of what the last advertised subnet was, and
give each subnet 10 seconds of advertising at a time.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add configuration client model support for NetKey Add message, as well
as a mesh shell command for calling the new API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The logic for choosing to relay from the GATT bearer to the
advertising bearer was still buggy. This patch refactors the logic to
a separate helper function to make it clearer.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The command handler already has support for decoding from hex, however
it was not using the decoded value when calling the client API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If relaying is not supported, or disabled, the Relay Transmit state
will normally be 0, which is not what we want to use when proxying out
packets from GATT clients. The bt_mesh_net_relay() function is also
used for sending out locally originated packets, in which case the
Relay Retransmit state is also the wrong one to use (the Network
Transmit state should be used instead).
This patch makes sure we only use the Relay Retransmit state for
packets originating from the advertising bearer, and for all other
packets use the Network Transmit state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_mesh_net_relay() function was missing several important checks
for whether a PDU should be relayed or not. In particular, it would
relay a packet from adv to adv even if the Relay state was set to
disabled, as long as GATT Proxy was set to enabled. The code would
also relay packets to the GATT Proxy bearer if the Relay state was set
to enabled but GATT Proxy was set to disabled. This patch addresses
both of these issues.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the Relay state is set to Not Supported (0x02) the Config Relay Set
message should not change the state, rather just return its current
value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The beacon cache handling was severely broken in the way that the
cache_add() function was incorrectly mapping net_idx to array index,
which could have lead to array overflows.
To fix this, while also cleaning things up, move the cache to the
actual bt_mesh_subnet struct. This e.g. lets us avoid having to track
the net_idx twice.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
https://www.bluetooth.org/errata/errata_view.cfm?errata_id=9807
"If the computed Beacon Interval is less than 10 seconds, it should be
set to 10 seconds. If the computed Beacon Interval is greater than 600
seconds, it should be set to 600 seconds."
The lower limit is already covered by how frequently the delayed work
callback gets called, so we just need enforce the 600 second maximum.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Whenever there's a security change (Key Refresh or IV Update) we
should immediately send beacons to any Friend Queues or connected GATT
clients. Introduce a helper function to do this, and make sure it's
called from all places that change the Key Refresh or IV Update
states.
This fixes test case MESH/SR/PROX/PB-12-C.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Johan Hedberg