If we enable CONFIG_DEBUG_INFO, then we need to fixup the stack
on thread entry so that the EFLAGS value in the EBP slot doesn't
confuse the debugger or any runtime stack unwinding code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The comment was obsolete; we simply do not allow use of the FPU or
vector math in ISRs. There is no desire to add such support, doing
this is properly offloaded to a worker thread.
Fixes#5283.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move common SoC dts.fixup defines into arch/x86/soc/atom/dts.fixup so we
remove duplication in the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into arch/x86/soc/ia32/dts.fixup so we
remove duplication in the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/x86/soc/intel_quark/quark_se/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/x86/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The xtensa-asm2 work included a patch that added nano_internal.h
includes in lots of places that needed to have _Swap defined, because
it had to break a cycle and this no longer got pulled in from the arch
headers.
Unfortunately those new includes created new and more amusing cycles
elsewhere which led to breakage on other platforms.
Break out the _Swap definition (only) into a separate header and use
that instead. Cleaner. Seems not to have any more hidden gotchas.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
During compile of lwm2m_client using qemu_x86, the following build
warning was noticed:
zephyr/arch/x86/core/excstub.S:132:2: warning: "/*" within comment [-Wcomment]
/*
In commit ff42bdd0a0 ("debug: remove option GDB_INFO"), the comment tag
was omitted. Fix the comment end tag.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
A fix for this issue is in progress, meanwhile warn the user that
they may be susceptible to this problem if they enable user mode on
an x86-based target that is not known to be immune.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
when a current thread is added to a memory domain the pages/sections
must be configured immediately.
A problem occurs when we add a thread to current and then drop
down to usermode. In such a case memory domain will become active
the next time a swap occurs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add an architecure specfic code for the memory domain
configuration. This is needed to support a memory domain API
k_mem_domain_add_thread.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Save the required scratch pad register (in this case only edx)
before calling the C function.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When CONFIG_X86_MMU is enabled for arduino 101 the start address
should be aligned to 4kB. If not aligned the page tables would not
be created and the build fails.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
During swap the required page tables are configured. The outgoing
thread's memory domain pages are reset and the incoming thread's
memory domain is loaded. The pages are configured if userspace
is enabled and if memory domain has been initialized before
calling swap.
GH-3852
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is intended for memory-constrained systems and will save
4K per thread, since we will no longer reserve room for or
activate a kernel stack guard page.
If CONFIG_USERSPACE is enabled, stack overflows will still be
caught in some situations:
1) User mode threads overflowing stack, since it crashes into the
kernel stack page
2) Supervisor mode threads overflowing stack, since the kernel
stack page is marked non-present for non-user threads
Stack overflows will not be caught:
1) When handling a system call
2) When the interrupt stack overflows
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Besides the fact that we did not have that for the current supported
boards, that makes sense for this new, virtualized mode, that is meant
to be run on top of full-fledged x86 64 CPUs.
By having xAPIC mode access only, Jailhouse has to intercept those MMIO
reads and writes, in order to examine what they do and arbitrate if it's
safe or not (e.g. not all values are accepted to ICR register). This
means that we can't run away from having a VM-exit event for each and
every access to APIC memory region and this impacts the latency the
guest OS observes over bare metal a lot.
When in x2APIC mode, Jailhouse does not require VM-exits for MSR
accesses other that writes to the ICR register, so the latency the guest
observes is reduced to almost zero.
Here are some outputs of the the command line
$ sudo ./tools/jailhouse cell stats tiny-demo
on a Jailhouse's root cell console, for one of the Zephyr demos using
LOAPIC timers, left for a couple of seconds:
Statistics for tiny-demo cell (x2APIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 7 0
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, xAPIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_xapic 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_msr 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xsetbv 0 0
Statistics for tiny-demo cell (xAPIC root, x2APIC inmate)
COUNTER SUM PER SEC
vmexits_total 4087 40
vmexits_msr 4080 40
vmexits_management 3 0
vmexits_cr 2 0
vmexits_cpuid 1 0
vmexits_exception 0 0
vmexits_hypercall 0 0
vmexits_mmio 0 0
vmexits_pio 0 0
vmexits_xapic 0 0
vmexits_xsetbv 0 0
See that under x2APIC mode on both Jailhouse/root-cell and guest, the
interruptions from the hypervisor are minimal. That is not the case when
Jailhouse is on xAPIC mode, though. Note also that, as a plus, x2APIC
accesses on the guest will map to xAPIC MMIO on the hypervisor just
fine.
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
This is an introductory port for Zephyr to be run as a Jailhouse
hypervisor[1]'s "inmate cell", on x86 64-bit CPUs (running on 32-bit
mode). This was tested with their "tiny-demo" inmate demo cell
configuration, which takes one of the CPUs of the QEMU-VM root cell
config, along with some RAM and serial controller access (it will even
do nice things like reserving some L3 cache for it via Intel CAT) and
Zephyr samples:
- hello_world
- philosophers
- synchronization
The final binary receives an additional boot sequence preamble that
conforms to Jailhouse's expectations (starts at 0x0 in real mode). It
will put the processor in 32-bit protected mode and then proceed to
Zephyr's __start function.
Testing it is just a matter of:
$ mmake -C samples/<sample_dir> BOARD=x86_jailhouse JAILHOUSE_QEMU_IMG_FILE=<path_to_image.qcow2> run
$ sudo insmod <path to jailhouse.ko>
$ sudo jailhouse enable <path to configs/qemu-x86.cell>
$ sudo jailhouse cell create <path to configs/tiny-demo.cell>
$ sudo mount -t 9p -o trans/virtio host /mnt
$ sudo jailhouse cell load tiny-demo /mnt/zephyr.bin
$ sudo jailhouse cell start tiny-demo
$ sudo jailhouse cell destroy tiny-demo
$ sudo jailhouse disable
$ sudo rmmod jailhouse
For the hello_world demo case, one should then get QEMU's serial port
output similar to:
"""
Created cell "tiny-demo"
Page pool usage after cell creation: mem 275/1480, remap 65607/131072
Cell "tiny-demo" can be loaded
CPU 3 received SIPI, vector 100
Started cell "tiny-demo"
***** BOOTING ZEPHYR OS v1.9.0 - BUILD: Sep 12 2017 20:03:22 *****
Hello World! x86
"""
Note that the Jailhouse's root cell *has to be started in xAPIC
mode* (kernel command line argument 'nox2apic') in order for this to
work. x2APIC support and its reasoning will come on a separate commit.
As a reminder, the make run target introduced for x86_jailhouse board
involves a root cell image with Jailhouse in it, to be launched and then
partitioned (with >= 2 64-bit CPUs in it).
Inmate cell configs with no JAILHOUSE_CELL_PASSIVE_COMMREG flag
set (e.g. apic-demo one) would need extra code in Zephyr to deal with
cell shutdown command responses from the hypervisor.
You may want to fine tune CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC for your
specific CPU—there is no detection from Zephyr with regard to that.
Other config differences from pristine QEMU defaults worth of mention
are:
- there is no HPET when running as Jailhouse guest. We use the LOAPIC
timer, instead
- there is no PIC_DISABLE, because there is no 8259A PIC when running
as a Jailhouse guest
- XIP makes no sense also when running as Jailhouse guest, and both
PHYS_RAM_ADDR/PHYS_LOAD_ADD are set to zero, what tiny-demo cell
config is set to
This opens up new possibilities for Zephyr, so that usages beyond just
MCUs come to the table. I see special demand coming from
functional-safety related use cases on industry, automotive, etc.
[1] https://github.com/siemens/jailhouse
Reference to Jailhouse's booting preamble code:
Origin: Jailhouse
License: BSD 2-Clause
URL: https://github.com/siemens/jailhouse
commit: 607251b44397666a3cbbf859d784dccf20aba016
Purpose: Dual-licensing of inmate lib code
Maintained-by: Zephyr
Signed-off-by: Gustavo Lima Chaves <gustavo.lima.chaves@intel.com>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
In PAE boot tables the __mmu_tables_start points to page directory
pointer (PDPT). Enable the PAE by updating the CR4.PAE and
IA32_EFER.NXE bits.
JIRA:ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Created structures and unions needed to enable the software to
access these tables.
Also updated the helper macros to ease the usage of the MMU page
tables.
JIRA: ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
If CONFIG_X86_PAE_MODE is enabled for the build, then gen_mmu.py
would generate the boot time page tables in PAE format.
This supports 3 level paging i.e Page Directory Pointer(PDPT), Page
Directory(PD) and Page Table(PT). Each Page Table Entry(PTE) maps to
a 4KB region. Each Page Directory Entry(PDE) maps a 2MB region.
Each Page Directory Pointer Entry(PDPTE) maps to a 1GB region.
JIRA: ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Page Address Extension(PAE) page tables would be used
if this option is enabled.
JIRA:ZEP-2511
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Tomasz Bursztyka