Since this is a test dedicated to Intel S1000 CRB,
use the I2C0 device name directly instead of a Device Tree or
Kconfig defined device name.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Update DMA tests according to dma_cavs implementation of
single block transfers. Multiple block transfers are achieved
by reloading DMA upon every DMA completion.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
This commit adds support for device id shell command.
Example:
uart:~$ hwinfo devid
Length: 12
ID: 0x1b0320d51485330313420
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Use DT_ instead of CONFIG_ for spi freq, spi bus name, flash device
name and flash base address.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
S1000 i2c test was blinking only blue and red lights. However, if
we have to distinguish between 2 test images for whatever reasons,
it is handy to have one test image blinking blue-red while the
other blinks green-white.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The tests are modified to reflect the changed return values
the spi flash read and write APIs return.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
USB is desired to be configured by default and hence the Kconfigs
are addressed in _defconfig for intel_s1000_crb. Cleaned it up
from the app level prj.conf which was anyway redundant.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Turning 'def_bool' in Kconfig.defconfig files into 'default' revealed
three unused symbols (confirmed with 'git grep'). Remove them.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
an explanation of how def_bool->default can reveal undefined symbols.
Removed unused symbols:
- SPI_DW_CLOCK_GATE
- PINMUX_MPS2
- BOARD_XTENSA
Also remove an assignment to the promptless symbol ALTERA_AVALON_SYSID,
in tests/boards/altera_max10/sysid/prj.conf. Assignments to promptless
symbols have no effect.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Application should be responsible for enabling various drivers and
features, we should not enable everything by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Group various shell modules for kernel, peripherals and other
subsystems. This will be used to test board functionality interactively
using commands implemented in the individual shell modules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Mux configuration for I2C and GPIO are now done in SYS_INIT
which were earlier done in the respective tests.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Some drivers or tests need to execute some code before Zephyr is
booted, dynamically register command line arguments, etc.
For this purpose, we generalize the NATIVE_EXIT_TASK to also
provide hooks to run a function at a given point during the startup
of native_posix.
Also, test/boards/native_posix/exit_tasks is generalized to cover
this new functionality.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added a simple test to validate the real time control and
RTC functionality
Note that this test depends too much on not having a high host
load to pass.
Therefore it is better to not run in it automated regression
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Add test for Altera Nios-II MSGDMA soft IP core. This IP on
Altera MAX10 support Memory to Memory DMA transfers.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add support to enable test application selectively based
on defconfig
Change-Id: I8111750ff099edd95ffa22c6e312999c801678ea
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
patch add a hid test application which sends continues
reports to the host
Change-Id: I3a638caded629b502b4cfc6c7bdcba0b67428350
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the CAVS I2S on intel_s1000. Also, introduce a test to
validate I2S in ping-pong and normal modes.
Change-Id: Iea78e22cedc7724c1c2e821c68d7030cc0a65047
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable the CAVS DMA on intel_s1000. Also, introduce a test to
validate the DMA.
Change-Id: I2ff233c45cfd8aea55e254d905350a666aa649a0
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patchset carries out basic tests on the features supported
on intel_s1000. Currently, Interrupt mechanism, GPIO handling, I2C
communication and UART prints are illustrated.
Change-Id: I7ea03b5085b7fa8d29635c294038536465a70660
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add test application for Nios-II i2c core on Altera MAX10 board.
This test uses ADV7513 HDMI I2C slave module on Altera MAX10
board to perform i2c read and write operations. For more details
on ADV7513 HDMI module, please refer to the following link.
https://ez.analog.com/docs/DOC-1986
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Daniel Leung