In the flash partition definitions for ARM boards,
the link to the legacy partition macros does not
exist any more. The commit cleans up the partition
definition by removing this link.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
After running command --list-test-duplicates
I found out that some test cases have same names (duplicated).
To get rid of it, I decided to change names in .yaml files
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
A few test header files have C++ guards around them, but are incorrect.
Those files had a leading `#` placed before `extern`, which is
incorrect. This commit simply removes those leading `#` characters.
Signed-off-by: Brooks Prumo <brooks@prumo.org>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some cleanup in tests code as after duplicates filtering
was introduced there is no need to interpret 0-length readout in
settings h_set handler
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Stops leaking very long source paths in build directories; makes them
deterministic. Finishes what was started in commit b4282bf72d, see
rationale and code reviews there.
See also CMake issue https://gitlab.kitware.com/cmake/cmake/issues/19475
for more details.
Use the opportunity to remove the most obvious duplication.
Test with: sanitycheck -T $ZEPHYR_BASE/tests/subsys/settings/
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This commit fixes the FCB delete test after PR #19541.
Now the entity callback is not called on deleted element.
Issue: #19963
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
We don't allow an ifdef in ztest_test_suite because its a macro. We
usually handle this by defining multiple blocks and ifdef around them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add test for check whether deleted entry is recognized properly
after settings reload.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added tests of flash driver compatibility with fcb-backend.
For flash drivers which support write-block-size bigger than 1 B
test of unaligned data access uses native write-block-size
as it is dedicated to check whether settings works well on platform
which has 1 B access which is native on the current DUT.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The settings module processes the variable name by splitting it up in
a set of variables. This PR removes the splitting up and keeps the
variable name as one string.
It is an alternative to #16609
The possibility is introduced to register handler including a
separator, or to register a handler for each variable.
The ability is introduced to load a subtree from flash or even to load
a single item.
Two ways to operate on variable and settings_handler names are provided:
settings_name_steq(const char *name, const char *key, const char **next)
which checks if name starts with key, returns 1/0 if it does/does not
the remaining part of name is in next.
settings_name_split(const char *name, char *argv, const char **next)
which splits up name in a part before "/"" that is found in argv and
the remaining part that is in next.
A mutex is added to make settings thread-safe
The settings_handlers list is stored in reverse alphabetical order, this
allows registration of e.g. bt and bt/mesh in separate handlers, the bt
handler itself should not contain any handling of bt/mesh.
A settings_deregister() method is added. Settings_handlers can now be
added/removed when required. This saves RAM when settings_handlers are
not needed.
Tests have been updated to reflect changes in the settings api.
Updates after meeting:
1. Removed settings_deregister
2. Changed settings_name_split() in settings_name_next:
int settings_name_next(const char *name, const char **next): returns
the number of characters before the first separator. This can then be
used to read the correct number of characters from name using strncpy
for processing.
3. New functional test added
Update in settings.h: settings_name_next() changed position -> index
Added some comments in settings.h (settings_name_steq())
Updated tests to reflect change to settings_name_next() and pointer
value comparison. The functional test can now also run on qemu_x86.
Corrected some documentation in header.
Changed registration of handlers to be non ordered.
Changed handler lookup to handle non ordered list of handlers, this
improves handler matching in case different length names are compared
and also makes it easier to add rom based handlers as they will not be
ordered.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
Unaligned test might filed in case fcb area was not clen before
run.
The patch insert clean operation before this test.
fixes#15063
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It was possible via Kconfig to assign any partition for FCB using
its number. Partitions flash_area_id becomes non predefined
(are auto-generated). So it is possible only to guess which
number will be signed to certain area.
Unfortunately it is not possible to transfer FLASH_AREA_XXX_ID
label via Kconfig.
Patch assigns settings to the storage partition and remove
SETTINGS_FCB_FLASH_AREA property from settings Kconfig.
fixes#13388
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added test for check whether value lenght is properly
stored for unaligned settings record size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Set Kconfig symbol SETTINGS_FCB_FLASH_AREA based on the
DT_FLASH_AREA_<FOO>_ID define instead of being hard coded.
We replace 3 with DT_FLASH_AREA_IMAGE_SCRATCH_ID and
we replace 4 with DT_FLASH_AREA_STORAGE_ID.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since it is possible to test back-end with base64 and without
test suite should be extended.
This patch introduce tests with and without base64 encoding
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
This commit removes all MPU-related (ARM_CORE_MPU and NXP_MPU)
options exept ARM_MPU, which becomes master switch controlling
MPU support on ARM.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The ARM_MPU_NRF52X option is just selecting ARM_MPU option,
which could be also controlled through menuconfig.
This commit removes the ARM_MPU_NRF52X option and replaces
its usage by ARM_MPU option.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Tests failed on the target because flash area reserved
for fcb data storage was to small.
This path add dts overlay file for nrf52_pac10040 board which
increases this flash area to proper size.
Fixes#8038
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
New test for check whether deleted item is not copied to the newest
fcb sector during compression procedure.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Ioannis Glaropoulos