We had the if in the wrong place causing some Kconfigs to be set even if
filesystem was not configured in.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch removes the need for application build script code to
explicitly link 'app' with a filesystem implementation.
It does this by introducing a zephyr interface library called 'FS'
that contains the usage requirements for linking with the filesystem
library subsys__fs and using Kconfig to default to linking the 'app'
library with this interface library.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Zephyr supports fatfs, nffs and fcb as storage layer. fatfs and nffs
are less suited for application in memory restricted IC's. fcb has a
smaller footprint but has a complex api.
The proposed module is a module with a even smaller footprint compared
to fcb and a simple interface for reading and writing entries. The
module provides wear levelling of flash. This allows the module to be
used not only to store configuration settings but to store device state
(e.g. state of a light switch over reboots) of a zephyr device.
Fixes buffer overflow by introducing maximum read length in nvs_read()
and nvs_read_hist().
Fixes nvs_write() not to reflash the same data. Allows the user to do
call nvs_write() for all defined entries without worries about flash
wear.
Fixes garbage collection error where wrong data could be copied.
Add nvs_delete() to allow deleting a stored entry. A deleted entry will
not be copied to a new flash sector
Include flash wear information in the README.md documentation
0/25 Update module after reviewers remarks, added documentation to
nvs.h, removed README.md by nvs.rst in doc/subsystems folder
04/26 Update module after reviewers remarks, updated nvs.rst, added more
documentation to samples/subsys/nvs/src/main.c, updated doxygen info
in nvs.h (hope this time it works).
04/26 Update subsystems.rst to include nvs.restart
04/27 Updated nvs.c and nvs.h to avoid a possible flash deletion loop
when the file system is full.
04/29 Updated nvs_write to detect and ignore deletes of non-existing
items
05/06 Update NVS module to return standard error codes, removed low
level API, added configuration options. NVS now uses the board dts to
determine the flash storage location (FLASH_AREA_STORAGE_OFFSET).
05/06 Update nvs.rst. Updated intendation and added intermediate
variables in nvs.c to make the code easier to read.
05/06 Update nvs.rst.
05/07 Update nvs.rst
05/08 Changed the API to a more standard file system API.
05/08 Removed cnt_max from nvs_read() as it is not used.
05/08 Removed #ifdef(CONFIG_NVS_LOG) from nvs_priv.h, now the module can
be build with debugging off.
05/09 Removed configuration options for SECTOR_SIZE, SECTOR_COUNT and
MAX_ELEM_SIZE. It is now easy to support multiple NVS filesystems on
one or multiple devices. Changed logging to support newlib systems.
Thanks to Olivier Martin for reporting and proposed changes.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Add support for multiple instances of a file system by
making use of mount point as the disk volume name which
is used by the file system library while formatting or
mounting a disk.
Also moved out file system specific data structures from
public fs.h header and handled them in corresponding
file system interface files by introducing open files and
open directories concept which is already being used in
NFFS interface module. Now it is extended to FatFs as well.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
FS_FLASH_MAP_STORAGE keyword enables the storage partition,
but it was depend on flash_map module which is unused by
NFFS. This patch makes it independent thanks
to it is possible to enable the storage partition
without flash_map module.
FS_FLASH_MAP_STORAGE was renamed to
CONFIG_FS_FLASH_STORAGE_PARTITION
as it is independent for flash_map.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The NFFS partition at the end of flash is also useful for any other
file system or even the Flash Circular Buffer (FCB). Rename the
partition from 'nffs_partition' to 'storage_partition' and make it
depend on a new hidden Kconfig entry which the relevant users will
select (such as NFFS and FCB).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Zephyr already supports NFFS as a storage layer, but it might
be a little bit too heavyweight for certain applications in
memory-restricted ICs.
This module is response for need of Lightweight flash storage
capability. FCB is ported form MyNewt as native zephyr module.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Of the filesystems under subsys/fs/, only the ELM FAT filesystem needs
the disk layer as others (like NFFS) talk directly to the flash API.
This removes the need to define CONFIG_DISK_ERASE_BLOCK_SIZE and
similar which are used by the disk subsystem but not by NFFS.
Signed-off-by: Michael Hope <mlhx@google.com>
This patch adds filesystem interface implementation for NFFS.
Default configuration for mem slabs sizes are the same as in Mynewt.
Origin: Original
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Add a simple shell that allows exploring the contents of the file
system.
Jira: ZEP-1235
Change-Id: Iaa49f0be18980dd740e9552ddf4761196a818884
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
FS_FAT_FLASH_DISK_W25QXXDV is a boolean so "" makes no sense.
Change-Id: Ic43529928d80bcd76c2876219990bcec86657d3d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The flash and RAM disk options are mutually exclusive (evident e.g. in
both defining FS_VOLUME_SIZE and FS_BLOCK_SIZE variables), so they
should really be inside a choice-endchoice block. The duplicated
options can also taken care of with a single definition using
conditional default values.
Change-Id: I87733f0c342166a9e03aa0e1f34390d91107b137
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Subsystems code will reside in subsys/ folder. This patch creates the
folder and moves FS code there.
Jira: ZEP-1120
Change-Id: If3b1bcb996c5fbd4056cd5d1920d41d29810d6b2
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Anas Nashif