Not all boards require the various binary formats zephyr generates. So
be selective based on the arch, SoC or board and only geenrate the
binaries actually needed.
Fixes#5009
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move a way from misc/ and put in its own subsystem to allow enhancements
in the future and make it a core part of Zephyr, not just something
misc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
1. Changed _tsc_read() to k_cycles_get_32(). Thus reading the
time stamp will be agnostic of the architecutre used.
2. Changed the variable names from *_tsc to *_time_stamp.
JIRA: ZEP-1426
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds a condition on the FLASH_LOAD_OFFSET and FLASH_LOAD_SIZE
to make them conditionally excluded if HAS_DTS is enabled. FLASH
partition information must be defined for all DTS platforms which
utilize flash.
For DTS enabled platforms, CONFIG_FLASH_LOAD_OFFSET and
CONFIG_FLASH_LOAD_SIZE will be generated from the flash information
defined in the DTS file. The values used for these variables will be
determined by the zephyr,code-partition chosen node. If no chosen
node is specified, the zephyr,flash chosen node will be used.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This should fix the grouping for debugging options appearing in the
main "menuconfig" menu.
Change-Id: I7ddf3a6f3d025bf82ba63099b30e47a40d7c3187
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The CONFIG_FLASH_LOAD_OFFSET allows the zephyr image to be placed at
an offset from the start of flash. This is useful for situations,
such as with a bootloader, to allow the image to not occupy the very
beginning of flash.
Complement this by adding a CONFIG_FLASH_LOAD_SIZE config, that can
constrain the size of the flash image. With the default of zero, the
behavior is as before, with the image allowed to occupy the rest of
the flash. It can also be defined to a non-zero value which will
constrain the image to occupy that many bytes of flash.
Although this is defined generally, it is currently only supported on
cortex-m targets.
Change-Id: I6e4a0e79c8459f931cd4757c932d20dac740f5f6
Signed-off-by: David Brown <david.brown@linaro.org>
Instead of FLASH_LOAD_OFFSET being something specific to cortex-m, add
it generally to misc/Kconfig, along with a hidden config
HAS_LOAD_OFFSET which can be selected by the architectures as they add
support for the functionality.
Change-Id: I256ff8cf4e9b8493b26354c3b93fe1f7017d4887
Signed-off-by: David Brown <david.brown@linaro.org>
Currently CONFIG_OMIT_FRAME_POINTER is a boolean and defaults to N,
which increases code size. This is intended to improve debugability
but on many architectures the use of this option does not actually
compromise debugging. Further the compiler already knows whether or not
omitting the frame pointer is harmful to debugging and its defaults
are selected accordingly.
By making this choice optional we can have a sane default on *all*
architectures by letting the compiler decide for us.
This patch significantly improves the default code generation on
arm (thumb), nios2 and arc. The benefit looks to be about between 5%
and 10% code size reduction depending upon architecture). x86 is
unaffected.
Change-Id: I5790634a40e2462cc1089dce4087040833793ae7
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use a short name for this option CONFIG_OBJECT_TRACING.
Change-Id: Id27de7ef9ca299492b6b7d2324d9f5bcf8059a31
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Since the SYS_LOG macros don't use printf anymore STDOUT_CONSOLE is no
longer a dependency for them.
Change-Id: Ia488759c9103dcd70cec30c8fb0bb7023ca7ca3a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If a particular project needs to add additional data to the
binary image, in most cases the entire linker script needs to
forked into the project space, causing maintenance issues if
the main linker script is changed.
Now we add some Kconfig options to allow a project to specify
some additional linker scripts which get included by the main
one in a few key areas:
1) In the definition to the 'rodata' section, which can allow
additional data to be included in this ROM section.
2) In the definition to the 'datas' section, which allows
additional data to be included in this RAM section.
3) Arbitrary additional sections to be included at the end of
the binary.
For 1 and 2, this is useful to include data generated outside of
the normal C compilation, such as data structures that are created
by special build tools.
3 is useful for including arbitrary binary blobs inside the final
image, such as for peripheral or co-processor firmware.
Change-Id: I5738d3d6da25f5bc96cda8ae806bf1a3fb34bd5d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
By adding external hook to sys_log we will allow applications
the flexibility of using various output mechanism such SPI,
flash, FS etc.
Jira: ZEP-1172
Change-Id: Ie32a5e52c3946ada0349b75a35cc107bb29385a1
Signed-off-by: Yossi Havusha <yossi.havusha@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some bootloaders have power management support to restoer context
upon resume from deep sleep. In such cases, the OS startup code
should call the notification hook. Create Kconfig flags to configure
this option.
Jira: 1257
Change-Id: I9f40c5fa077c2f17dc8e9f11604c3ed17e549ed5
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
If newlib is configured with --enable-newlib-nano-formatted-io,
floating-point support is split out of the formatted I/O code into
weak functions which are not linked by default. This leads to a smaller
code by about 16~20k when using newlib "printf" and/or "sscanf" but not
using floating point I/O.
Programs that need floating-point I/O support must explicitly request
linking of one or both of the floating-point functions:
_printf_float or _scanf_float.
This can be done at link time using the -u option which can be passed
to either gcc or ld.
Implemented via new configuration options:
CONFIG_NEWLIB_LIBC_FLOAT_PRINTF
CONFIG_NEWLIB_LIBC_FLOAT_SCANF
Change-Id: I57f9d9f02e6d21d6011d14de7153b1d3ba6f6e32
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Arduino 101 comes with a bootloader that supports DFU
and flashing of all cores using the dfu-util package.
This changes the memory layout of the image built for the
Arduino 101 and remove previous work-arounds to allow booting,
including the version-header section in the linker script.
The bootloader expects the text section at +0x30 from the physical
load address and thus requires special treatment in the linker
script.
Other changes by Andrew Boie:
The flash size parameters were both wrong. X86 side has 192K
of flash from 0x4003000 - 0x40060000, the entire span of
sys_flash1.
ARC side is now the span from 0x40010000 - 0x40030000, 128K.
Change-Id: Iecfa5d2b84a3f522d9eca06268d6b8b71a094aaa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Completing the terminology change started with change 4008
by updating the Kconfig files processed to produce the
online documentation, plus header files processed by
doxygen. References to 'platform' are change to 'board'
Change-Id: Id0ed3dc1439a0ea0a4bd19d4904889cf79bec33e
Jira: ZEP-534
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
By default, instead of spamming the build output with one warning per
file where __assert.h is included when CONFIG_ASSERT=y, only display a
warning at the end of the build.
Also limit the range of CONFIG_ASSERT_LEVEL between 0 and 2.
Change-Id: I95ffd1bcec9535de1afabc047814e5c6f5b9c2c1
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
tinycrypt was built using the lib- scripts without any real benefit. We
also had a wrong placement of the Kconfig files under misc/ and a Kconfig
file for Crypto that was never used before.
Change-Id: I82d5902d92e7c06e10a95f418d9ead3cbcabcce4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To boot zephyr on the Arduino 101 running the original bootloader
which supports DFU, set the following in your application configuration
file:
CONFIG_SS_RESET_VECTOR=0x40034000
CONFIG_PHYS_LOAD_ADDR=0x40010000
CONFIG_VERSION_HEADER=y
Jira: ZEP-219
Change-Id: Ia015a7b6fce888b49ed22c558de992132d4713ea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The header sys_log.h concentrates logging macro definitions so it can be
reused by all code, change aims create an API to replace replace
currently duplicated logging macro definitions. Later enhancements to
log can now be performed in a single file. Features:
* Optional printing of colored messages
* Incremental log levels per-module
* Optional printing of logging level label (info, error, warning, debug)
* Caller function name printing
* One point log disable
* Global override log level
* Print function detection (printf or printk)
JIRA item ZEP-111 refers to this change.
Origin: Original
Change-Id: I34492b0148b4e9d0094f69c511b96f4fd640ef44
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Use linker symbol and board configs to determine the start
and extent of remaining RAM present in a board and use
it as newlib's heap.
Change-Id: I7128cf2857664331d83f212f27e8af7ad3bb8936
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
While we don't have a proper heap that can make use of all the
available RAM, make it possible for applications using Newlib to
configure the size of the heap exposed via the sbrk() hook.
Change-Id: I4e3193c1f2df0ace1dbc5b1f6ceb2cdc61479762
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Adds C++ support to the build system.
Change-Id: Ice1e57a13598e7a48b0bf3298fc318f4ce012ee6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The option is used in the code but was never declared.
Change-Id: I17552c225936652e9208f53a884311eb81cb79a6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will only generate the .su files when CONFIG_STACK_USAGE
is specified, otherwise the tree will be full of .su files.
Change-Id: I3ffc7a7f5ab09aaae49ff65e8ad5de0832370777
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some options appear in the top level menuconfig, group them
and put put them in a menu.
Change-Id: Ib0285176e7f0ed7ec9ff54dd80c0f02ec4817f2b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the REBOOT kconfig option, along with the sys_reboot() API.
This infrastructure is not enough to actually perform a reboot.
Architecture/platform code must be provided as well, in the form of a
sys_arch_reboot() function.
Change-Id: I5b2b15855ff06453f2764f3e3b3b7d6a4a078723
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduces the following routines to provide safe access to memory:
_mem_probe()
_mem_safe_read()
_mem_safe_write()
_mem_safe_write_to_text_section()
Those routines will return an error if the memory is not accessible rather
than potentially crash.
This implementation is based on the image's boundaries; thus it allows
read/write access to the data/bss/init sections and read access only to
the text/rodata sections. All other memory is considered invalid, even
if addressable. This includes the leftover from the RAM at the end of
the image, since there is no support for using it (e.g. there is no
dynamic allocator).
Change-Id: I6093688ecfd9b00d61be0fd453ada7bb8915c897
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the Kconfig option for enabling the debug object tracing.
Change-Id: I56bf48568905604f6f50a06db2c5eaf4d91ded1d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
do not use microkernel or nanokernel as the output binaries,
instead, use zephyr globally.
Also change the documentation to reflect this.
Change-Id: I8405761d1a0392c90cdfeec5c67d72eb4e5a76ff
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change will allow the use of a custom linker script by
setting the config variable CUSTOM_LINKER_SCRIPT to a path outside
of Zephyr tree.
This is useful when an application needs to add sections into the
linker script and avoid having to change the script provided by
Zephyr.
Change-Id: Ibe31abcc8c0227e734f59bc26d3c8d5619951b29
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Anas Nashif