Commit messages now require a body summary (before it could be blank for
"trivial" changes).
Add mention of uncrustify to help format code to project standards.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Very brief documentation of the board as a placeholder, more info on
supported features will follow.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Sort the glob results when Kconfig sources do 'source
"/path/*/Kconfig"' to ensure that the resulting dotconfig file is the
same for all platforms.
This fixes#5743
Credit goes to @ulfalizer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Atmel SAMD21 series was classified too broadly as SAMD.
This patch names it correctly to make room,
for other members of SAMD series
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
Add a new build variant that builds for Nordic nRF52832 with the new
MCUboot CONFIG_BOOTLOADER_MCUBOOT Kconfig variable set.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When the Kconfig BOOTLOADER_MCUBOOT is selected, an overlay to place the
image at the slot0 location is required. In order to avoid having to do
this manually for all samples when targetting MCUboot, include the logic
inside the dts.cmake script to prepend a new common.dts file that then
conditionally includes mcuboot.overlay.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
CMakeLists.txt @nashif @SebastianBoe
was supposed to reference only the root file, but was referencing all
files. This commit patches CODEOWNERS to behave as intended.
See https://help.github.com/articles/about-codeowners/
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix conditional compilation in nRF5 radio interface so that
when Coded PHY feature is not selected then it does not use
the PPIs required for supporting the feature.
This will allow pwm_nrf5_sw driver to use PPI channels 14 to
19 and support 3 PWM channels. Without the Coded PHY feature
disabled, only PPI 14, 15, 18 and 19 are available for PWM.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a new API to get net pkt based on dst address. Destination
address will be used to find correct net_context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When net_app_ctx has multiple net_contexts, selecting net_context
based on dst address has some glitches.
E.g. One net_app_ctx and two net_contexts (net_ctx1, net_ctx2).
Both net_contexts are mapped to net_app_ctx.
When a caller looking for net_ctx (e.g. net_ctx2) with
matching dst address. Loop goes through net_ctx1 and dst
doesn't match. But another if condition checks does this
net_context mapped to net_app_ctx, yes it matches.
So return net_ctx1, which is wrong.
So first go through all elements in array of net_contexts for
matching dst address, if it fails to find then go for matching
net_app_ctx.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Default network interface is the first interface if there are multiple
interfaces exist. But this creates an issue when different parts of
the network subsystem wants to choose particular default interface.
At-least with this Kconfig option user can select default network
interface.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
sanitycheck: Compile unit tests with coverage enabled always
+ run also first unit tests together with native_posix
shippable: also include unit_testing coverage into report to
codecov
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Prior to this commit, the old `FLASH_DRIVER_NAME` macro was being used
in the definition of the flash drivers array. This caused the array to
have a size of 0.
This commit changes the code to use the newer `FLASH_DEV_NAME` macro,
causing the configured flash device to be present in the table.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Fix sys log compilation warnings by defining the
SYS_LOG_LEVEL to SYS_LOG_I2C_LEVEL in Nios-II i2c driver.
This commit fixes Issue #6062
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
To enable using application-defined sections in linker scripts, the
application source directory must be included in the search path when
running the preprocessor to generate linker scripts.
This prevents build failures when using any of the configuration options
CONFIG_CUSTOM_RODATA_LD, CONFIG_CUSTOM_RWDATA_LD and
CONFIG_CUSTOM_SECTIONS_LD.
Signed-off-by: Kristian Klomsten Skordal <kristian.skordal@nordicsemi.no>
Bugfix in the tickless mode part:
During _time_idle_exit it was not announcing to the kernel the
already passed silent ticks, but it was left for the tick interrupt
itself.
This did not cause any trouble so far as there was only the timer
interrupt in this board.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
- Make half float encode/decode conditional
- src/cborpretty.c, src/cbortojson.c and src/cborvalidation.c
conditionally include math.h and half float type support
- Conditionally include math.h in src/compilersupport_p.h to avoid
newlib libc from getting compiled in
- Conditionally compile src/cborparser_dup_string.c if newlib libc is
compiled in
Signed-off-by: Vipul Rahane <vipulrahane@apache.org>
The TinyCBOR library is a small Concise Binary Object
Representation (CBOR) encoder and decoder library, optimized for
very fast operation with very small footprint.
Origin: TinyCBOR
License: MIT
URL: https://github.com/intel/tinycbor
Version: 0.5.0-beta1
commit: 497066ee87dd54341adaa1195bf15ad11ee33b20
Purpose: Introduction of TinyCBOR
Maintained-by: External
Signed-off-by: Vipul Rahane <vipulrahane@apache.org>
Also pull out the SERCOM pads configuration to defines. Note that the
SAM0 has a two level configuration - a signal (like TX) is mapped to a
pad, and then a pad is mapped to a function on a pin.
Signed-off-by: Michael Hope <mlhx@google.com>
This commit updates the title and the description of the
ARMv6-M, ARMv7-M NVIC dts bindings, so that both the title
and the description reference the respective ARM architecture
and not the Cortex M cores.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit defines the Kconfig options for
ARM Cortex-M23 and Cortex-M33 CPUs. It also
udpates the generic memory map for M23 and M33
implementations.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This PR includes the required changes in order to support
conditional compilation for Armv8-M architecture. Two
variants of the Armv8-M architecture are defined:
- the Armv8-M Baseline (backwards compatible with ARMv6-M),
- the Armv8-M Mainline (backwards compatible with ARMv7-M).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nucleo_f413zh was missing some files to support flash with
openocd. Fix this lack and update doc.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
nucleo_f412zg was missing some files to support flash with
openocd. Fix this lack and update doc.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The toplevel CMakeLists.txt file is a core build system file akin to
the files in cmake/* and whoever is codeowner for cmake/* should also
be code owner for this file.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix return value to -EBUSY instead of 0 when releasing a
reference but not physically turning off the clock.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With current value of IPV6 Multicast address, IPV6 mcast bind
does not succeed and IPSP use case could not work.
Change use case multicast address to match IPV6 address and
enable binding
fixes: #6050
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The code in the LwM2M "Device" object was checking for this max
power source config value, except that it was never added as a
Kconfig option. Let's go ahead and add it so apps can set the
value appropriately.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
When attempting to read an unused multi-value resource such as
"Available Power Sources", lwm2m client return a successful coap packet
w/o any values. This looks like a timeout to any lwm2m servers which
make sure a valid response is returned.
Let's fix this by returning the correct NOT_FOUND error code instead.
NOTE: To test this I commented out the portion of the lwm2m client
sample which initializes the LWM2M_DEVICE_PWR_SRC_TYPE_BAT_INT and
LWM2M_DEVICE_PWR_SRC_TYPE_USB values. By default, the sample will
setup dummy values to be returned by the client.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This package is not needed for building on fedora and currently causes
dependency issue with the fedora package manager, so remove it.
Fixes#6013
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As per review of PR #5893, this is a follow up patch to update
select_writer() API to match the behavior of select_reader() API.
Quote from OMA-TS-LightweightM2M-V1_0_1-20170704-A. 8.2.5
"An Object Instance or Resource is Read by sending a CoAP GET to the
corresponding path. The response includes the value in the
corresponding Plain Text, Opaque, TLV or JSON format according to
the specified Content-Format (see section 6.4).The request MAY
specify an Accept option containing the preferred Content-Format
to receive. When the specified Content-Format is not supported by
the LwM2M Client, the request MUST be rejected."
Therefore, we do not attempt to assign a content-format when the
requested one is not supported. Instead, we return an error code.
0 is returned when reader or writer has been successfully selected by
select_reader() or select_writer()
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Disable compilation warnings for altera_avalon_i2c.c as it is not
maintained in Zephyr.
Cmake does not allow us to use set_source_files_properties on
source files directly, these files need to be linked to either
a target executable or a target library. Due to the above reason,
altera_avalon_i2c CMakeLists.txt creates a library and links the
source file to the zephyr library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add test application for Nios-II i2c core on Altera MAX10 board.
This test uses ADV7513 HDMI I2C slave module on Altera MAX10
board to perform i2c read and write operations. For more details
on ADV7513 HDMI module, please refer to the following link.
https://ez.analog.com/docs/DOC-1986
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add I2C Master driver for Nios-II I2C soft IP core.
This driver relies upon the Altera HAL I2C driver for all the bus level
transactions, interrupt handling and register programming.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Add wrapper or helper functions for Altera HAL runtime API's to
enable Altera HAL drivers on Zephyr.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The existing version of crc16_ccitt() is actually CRC-16/AUG-CCITT and
gives different results to Linux, Contiki, and the CRC unit in the
SAM0 SOC. This version matches Linux.
Note that this is an incompatible API change.
Signed-off-by: Michael Hope <mlhx@google.com>
Johan Hedberg