This macro is slated for complete removal, as it's not possible
on arches with an MPU stack guard to know the true buffer bounds
without also knowing the runtime state of its associated thread.
As removing this completely would be invasive to where we are
in the 1.14 release, demote to a private kernel Z_ API instead.
The current way that the macro is being used internally will
not cause any undue harm, we just don't want any external code
depending on it.
The final work to remove this (and overhaul stack specification in
general) will take place in 1.15 in the context of #14269Fixes: #14766
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Discovered with pylint3.
Use the placeholder name '_' for unproblematic unused variables. It's
what I'm used to, and pylint knows not to flag it.
Python tip:
for i in range(n):
some_list.append(0)
can be replaced with
some_list += n*[0]
Similarly, 3*'\t' gives '\t\t\t'.
(Relevant here because pylint flagged the loop index as unused.)
To do integer division in Python 3, use // instead of /.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
BIT macro uses an unsigned int avoiding implementation-defined behavior
when shifting signed types.
MISRA-C rule 10.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
BIT macro uses an unsigned int avoiding implementation-defined behavior
when shifting signed types.
MISRA-C rule 10.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
This reverts commit c9ace83c89 which
bypasses setting cache attributes.
The previous cache attributes actually set the text/data/etc.
sections to be inaccessible. So fix it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This partially reverts commit 5a47c60dbf.
The soc.h is now only included when _soc_irq_*() is being referred.
Fixes#11077.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Don't present USE_SWITCH and SMP to user applications that are
configuring for platforms that do not support SMP or USE_SWITCH.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit removes the custom_data field from _thread_arch
for xtensa platform as it is currently unused.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
There were many platforms where this function was doing nothing. Just
merging its functionality with _PrepC function.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The identifier looks like a mixed C/C++ comment, which is against
MISRA-C rule 3.1. As the identifier is not used, remove it altogether.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The old xtensa layer had an unused/untested facility where it would
apparently try to slave a timer tick to an arbitrary interrupt. The
legacy headers were still checking the kconfigs used to enable that
even though nothing wants it and the new driver has removed them,
breaking builds on platforms like S1000 that still use the older
layer.
Don't try to finess this as these files are going away. Just make
them local preprocessor symbols and set them to the default values
they always had.
(Note: the feature doesn't sound like it would have been so bad,
actually. We should probably crib that idea of having an
"external_tick" driver, but there's no reason for it to have been
arch-specific.)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Xtensa interrupts are handled generically, by testing a set of flagged
interrupts in the INTERRUPT register. It's not possible to know
exactly which device "caused" an interrupt.
The entry code was dispatching correctly, but it was failing to test
the enable state in INTENABLE. Such an interrupt will never "fire",
but it might still be flagged, and if we happen to end up handling an
interrupt of the same priority (due to some other device) the entry
handler would incorrectly invoke the disabled interrupt.
Found by dumb luck and a comedy of errors: the recent timer driver
change swapped the counter in use, which changed the interrupt number
to one shared with the I2C driver, whose early interrupts (odd that
this device is interrupting on boot when not in use, but whatever)
would then discover the OTHER timer counter had been flagged and try
to invoke an ISR for that other counter, which was the _irq_spurious()
spurious interrupt handler.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Zephyr isn't ready to handle interrupts yet, until the
threading/scheduler are set up and we make our first context switch.
This was a semi-hidden bug: only the timer interrupt would actually
get unmasked before the system was ready, and obviously would never
have time to fire a tick before the system completed initialization.
But a combination of system load and a new version of Qemu (which
seems to be more sensitive to non-deterministic timing glitchery) has
made this visible. About 2-3% of the time when run under a full
sanitycheck, the qemu process will get swapped away for long enough
that the tick timer expires before _Cstart() has reached
enable_multithreading().
It looks like the original code was cut and pasted from another
implementation, which was expected to call into an "application"
main() routine that wanted interrupts ready.
Fixes#11182
(Note also that this code is not used for ESP-32, which has its own
startup path)
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was causing a `label handle_irq defined but not used` warning
during build.
Fixes#10801.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This patch reduces the size of ISRs by changing the script to generate
the dispatcher per level to, instead of generating an indirect call per
mask match, do that just once at the function end.
For ESP32, this provides ~380bytes of savings in a (very) hot path
(text, just for the matcher functions generated by xtensa_intgen.py,
drop from 2197 bytes to 1817 bytes).
The generated code also uses the BIT() macro, which shifts 1UL instead
of 1. Shifting a signed integer is UB in C.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This allows Kconfig to specify which special register is being
used to store the pointer to the _kernel.cpu struct.
Since the SoC itself is highly configurable, sometimes MISC0 is not
available. So this adds the ability to use other special registers.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Always compare unsigned interger type with another unsigned
integer type. Currently in nios2, posix, riscv32, x86 and xtensa
we were comparing the _kernel.nested variable with a signed
interger type. Fixed this violation.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
MISRA-C requires that all declarations of a specific function, or
object, use the same names and type qualifiers.
MISRA-C rule 8.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added LOG_PANIC to fault handlers to ensure that log is flush and
logger processes messages in a blocking way in fault handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove extra #endif that should have been removed when the
corresponding #ifdef CONFIG_KERNEL_EVENT_LOGGER_SLEEP was
removed in commit a2248782a2
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch provides support needed to get timing related
information from xtensa based SOC.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Added a SYS_INIT for SoC level initialization of Intel S1000
Added routines for setting up resource ownership for
DMA, I2S
Added routine to setup power gating and clock configuration
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A design flaw of 'gsource' is that there's no way to require at least
one file to match the glob pattern. This could lead to silent errors.
Switch to a new design, where a plain 'source' is globbing and requires
at least one file to match. A separate 'osource' (optional source)
statement is available for cases where it's okay for a pattern (or plain
filename) to not match any files.
'orsource' combines 'osource' and 'rsource' (relative source).
This commit search-replaces 'gsource' with 'source', but backwards
compatibility with 'gsource' is still maintained by making it an alias
for 'osource' (and by making 'grsource' an alias for 'orsource').
The three Kconfig files arch/{nios2,posix,xtensa}/Kconfig source
arch/{nios2,posix,xtensa}/soc/*/Kconfig, which doesn't match any files.
Use 'osource' for those. The soc/*/Kconfig files seem to be for
additional SoC-specific symbols, only none exist yet on those ARCHes.
Also use 'osource' for the source of $ENV_VAR_BOARD_DIR/Kconfig in
boards/Kconfig, which doesn't exist for all boards.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This fixes a build issue on esp32 that was introduced recently with the
merge of an old PR.
Include the register headers in soc.h rather than soc.c and make them
available to other code via soc.h
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On 'drivers/i2c_esp32.c' there are functions useful for other
drivers. Functions and struct went moved to:
* arch/xtensa/soc/esp32/peripheral.h
* arch/xtensa/soc/esp32/soc.h
* include/drivers/gpio/gpio_esp32.h
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
lib/libc/minimal/source/CMakeLists.txt and
lib/libc/minimal/source/stdout/CMakeLists.txt was introduced in
12f8f7616 but it is not used by the build system. CMakeLists.txt in
the parent dir lib/libc/minimal/CMakeLists.txt adds C files to the
target with the lines like:
${CMAKE_CURRENT_SOURCE_DIR}/source/stdlib/atoi.c
${CMAKE_CURRENT_SOURCE_DIR}/source/stdlib/strtol.c
To make other empty CMakeLists.txt explicit, this commit adds a
comment line to them.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
IRQ priorities for CAVS and DW were previously defined in Kconfig.
They are now defined via DTS and removed from Kconfig.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add bit definitions and set M/N divider ownership in
i2s_initialize.
Changes to comply with coding guidelines
Changes to address review comments
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
Andrew Boie