Building a couple more files from the SimpleLink SDK in order to support
the ieee8021504 driver for CC13xx/CC26xx.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update hal_nordic to fix compilation issue with nrfx_nvmc, compilation
issue for NRF_UICR not defined in non-secure build.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
fixes#24706
Fixed issue of possible try to erase non page aligned
size of flash while serving image write command.
The new version has this bug fixed.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update the hal_nordic module revision, so that the following commit
becomes effective:
nrf_radio_802154: Use chosen zephyr,entropy to get entropy device
Use the label property of the node pointed by "zephyr,entropy" chosen
entry as the name of the entropy device to bind to. The pointed node
does not necessarily need to be a "nordic,nrf-rng" compatible one, what
was incorrectly assumed when CONFIG_ENTROPY_NAME was replaced in commit
5505d0baa66a89848f643120fafad232876df695.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This should fix an issue with setting labels. A label was renamed and
ci-tools did not handle the error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commits adds a config option to build a PSA trusted-firmware-m
(TF-M) application image for the secure processing environment, and
configures the Zephyr application image for the non-secure processing
environment. The secure and non-secure environment images will be
linked together via the veneer function table that is produced as an
artifact of the TF-M build process.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add infineon xmc series with XMC4500 support. XMC series comes with,
- CPU operates upto 120MHz
- 3 RAM (PSRAM1 - code, DSRAM1 - data and DSRAM2 - communiation)
- upto 1MB flash
init: clock control & gpio is not done, so SoC initialization directly
relies on HAL. Core operating clock is stored in no_init section, which
is kept under DSRAM1. Only DSRAM1 is used until clock support. Using
PSRAM1 and DSRAM1 needs adaptation in linker script - planned for next
revision.
Note: SystemInit cannot be consumed directly due to vector table +
HAL linker dependency.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Fixed masking defines for eSPI OOB RX and TX transfer
length registers. The transfer length fields are 13 bit.
The incorrect defines masked 14 bits.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move syst initialization code to zephyr tree and add
more useful fields (payload length and timestamp) in
SyS-T message packet.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.78 for CC13x2/CC26x2.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update the TI HAL module so that it points to a revision that has been
ported to the new timeout API.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is to update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.07 for CC32xx.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
As part of devicetree update to new devicetree.h We Need to convert
as use of DT_ARM_CORTEX_M4F_CLOCK_FREQUENCY to
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency) in the hal_ti for the
msp432p4xx SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update STM32WB HCI lib support to version 1.5.0.
Additionally provide a doc section to clarify compatibility
with stm32wb wireless co-processor binaries.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Start SOCKS5 proxy in the net-tools Docker image and run MQTT TLS
tests with SOCKS enabled. Since the MQTT TLS server is already
running as of the previous test, start only the danted daemon.
Rely on mosquitto MQTT port being handled by the Docker image
configuration file instead of specifying it on the command line.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Updating west.yml to point a fix to include proper time.h header in
the HAL. This should fix an issue where clock_gettime() is not
correctly called due to recent change to make it into a system call.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit updates `west.yml` to point to the `hal_atmel` commit that
fixes the incorrect GMAC priority queue register offsets for SAMV71.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update manifest to a version of EDTT that supports receiving this
response in the unknown command response test (HCI/GEV/BV-01-C).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
This commit updates the west.yml to point to the CMSIS module commit
that updates the CMSIS version to 5.7.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the west.yml to point to the commit that adds the
CMSIS-Core(A) and defines the configurations to enable it, in
preparation for the AArch32 Cortex-A architecture support in Zephyr.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr i2c interface. It leverages heavily from the existing mcux lpi2c
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update hal_atmel to fix wrong __MPU_PRESENT definition.
see zephyrproject-rtos/hal_atmel/pull/10
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Update the hal_nordic module revision so that the nrf_radio_802154
does not use the CONFIG_ENTROPY_NAME symbol which is no longer used
in the Zephyr tree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Eduardo Montoya