Adding the ability to set and get pthread names by defining
some non-standard extension functions that were first
introduced by Glibc.
Similar to zephyr thread naming, these allow for thread
tracking and debugging even when using the more portable
posix API.
Though Glibc was the originator, the current POSIX functions
have return codes based on Oracle's adopted spec, so these
functions follow suit. The Oracle and Glibc function
prototypes match.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some test cases have the same test case name.
To get rid of it, I decided to change test cases names
contained same names.
Please check my logic, how I give them names.
Usually trying to give name same as a directory folder.
There are still more test cases which necessary to change,
but I will make changes by small steps.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This test seems a little confused.
Adjust the calibration to allow 110ms sleeps to avoid error
during automated testing.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Use the INT_TO_POINTER() and companion macros to silence compiler
warnings about casting between pointers and ints of different sizes.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Remove bunch of TC_PRINT's with too verbose logging of test operations.
The only logging required is in case of failures, and improve that in
a couple of cases by using zassert_*(), and log errno.
In particular, this allows to reuse existing testcase functions to
create more complex testcases.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is no longer needed after using
zephyr_interface_library_named cmake directive in the POSIX subsys
source itself.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Per POSIX, open() is defined in <fcntl.h>. fcntl.h in turn comes from
the underlying libc, either newlib, or minimal libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This test seems a little confused. It does a POSIX usleep() for 90ms,
then checks the time taken, and verifies that it was no less
than... 91ms!
On existing platforms, tick alignment makes sure that we always take a
little longer, so this passes. But on high tick rate configurations we
get it exactly right. And fail.
Adjust the calibration to allow (exactly) 90ms sleeps. Also fixed a
comment that described the wrong units.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Delete CONFIG_TEST_USERSPACE=n no-ops because it's the default
since commit 7b1ee5cf13
- Some tests have a "userspace" tag pretending to TEST_USERSPACE but
don't and vice versa: fix missing or spurious "userspace" tags in
testcase.yaml files.
Tests have a _spurious_ "userspace" tag when they PASS this command
cause none should pass:
./scripts/sanitycheck --tag=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee userspace.log
All tests run by this command must either fail to build or fail to run
with some userspace related error. Shortcut to look at all test
failures:
zephyr_failure_logs() {
awk '/see.*log/ {print $2}' "$@"
}
Tests _missing_ "userspace" tag FAIL to either build or to run with some
userspace related error when running this:
./scripts/sanitycheck --exclude=userspace -p qemu_x86 \
--extra-args=CONFIG_TEST_USERSPACE=n \
--extra-args=CONFIG_USERSPACE=n | tee excludeuserspace.log
Note the detection methods above are not 100% perfect because some
flexible tests like tests/kernel/queue/src/main.c evade them with #ifdef
CONFIG_USERSPACE smarts. Considering they never break, it is purely the
test author's decision to include or not such flexible tests in the
"userspace" subset.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
According to POSIX, that's the header which defines this function.
Similarly, nothing in POSIX indicates that <time.h> should have
access to struct timeval, so it's removed (it's made accessible
to <sys/time.h> via <sys/_timeval.h> introduced earlier).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The NSIM emulator has severe performance issues when
the MPU registers are reprogrammed on context switch.
Disable runtime reprogramming of the MPU for these
platforms on these two tests, which have a lot of context
switch thrashing. This is done by ensuring userspace
and hardware stack overflow detection via guard areas
is disabled.
I have assurances from the ARC team that the tests run fine
on real hardware and this is an emulation issue.
For 1.15, this will be completely resolved by optimizing
MPU region gap-filling to not take place during context
switch time, which will drastically reduce the number of
MPU registers poked during context switch on nsim_sem.
Meanwhile, for 1.14 we ensure that no runtime reprogramming
of the MPU is done for these tests.
Fixes: #14642
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exactly one caller of pthread_barrier_wait() should receive a return
value of PTHREAD_BARRIER_SERIAL_WAIT; all others should receive zero
(or an error code). Added a test to match.
Fixes: #9953
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
(Chunk 3 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a build variant of the posix tests with newlib enabled. Since the
interation of posix is greatly related to the libc we should have these
tests build with and without newlib support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This test is breaking CI, we need a fix first before we go and enable
tests.
This reverts commit dc39a9adcf.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a build variant of the posix tests with newlib enabled. Since the
interation of posix is greatly related to the libc we should have these
tests build with and without newlib support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For now we are disabling support for POSIX lib on native posix arch. We
need to cleanup and support POSIX lib cleanly for hardware targets.
Once that is working properly we can look to support the feature on
native posix arch.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix array overrun issue by limiting the array
index to the maximum possible string length.
Coverity CID: 190624
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This test seems to be fine in the current master, but doing
development, it easily starts to overflow RAM of some boards and/or
crash due to stack checks. So, decrease the ramdisk (the biggest
eater of RAM here) from default 96K to 80K, and bump main stack
size proactively.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Some tests instantiate a lot of thread objects. These
were not tagged with __kernel, and
CONFIG_APPLICATION_MEMORY was enabled, so the kernel was
not adding them to the kernel object database.
However, with CONFIG_APPLICATION_MEMORY disabled, this
overflowed the default max number of thread objects (16).
Increase the max to 32 for these particular tests.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is intended to be a value set by the platform to adjust the size
of stacks created by tests. This test was setting it explicitly, and
failing to honor it when creating its own stacks.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Initialize an otherwise unitialized array which was causing random
failures in tests/posix/common.
Fixes#10508
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Remove redundant 'sample' tag and add something that matches the
functionality and features being tested, demonstrated.
Avoid short abbriviations and using full names for fs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Grouped the five pthread tests into two -
pthread execution and pthread termination;
removed redundant tests.
Added the refactored tests and pthread_key
tests into the common folder.
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Enhance semaphore test to validate sem_timedwait()
and sem_trywait(). This is intended to improve
code coverage.
Also modify ztest check with zassert_equal with
return value instead of zassert_false for better
understandability.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
As a master switch to access POSIX APIs.
Also, remove dependency on pthreads for tests which don't require it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Create a basic test for the realtime clock. This sets the clock value
to a particular time, half a second in, and monitors the clock for a few
seconds, making sure that the value returned is reasonable.
Signed-off-by: David Brown <david.brown@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In addition to testing all the APIs, this enhancement
tests the following two scenarios
- when multiple threads use a single key for storage
- when a single thread associates its value with
multiple keys
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Nicholas Lowell