This test is already flaky, but becomes even flakier when
coverage is enabled.
Disable until we put a stake through the QEMU timing issues
being worked on in #14173.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The time measurement based on k_uptime_delta() might be not accurate
for some values of CONFIG_SYS_CLOCK_TICKS_PER_SEC. This commit
introduces measurement based on k_cycle_get_32(), which is more
precise.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
(Chunk 3 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
There is actually nothing wrong with this test code idiom. But it's
tickling a qemu emulator bug with the hpet driver and x86_64[1]. The
rapidly spinning calls to k_uptime_get_32() need to disable
interrupts, read timer hardware state and enable them. Something goes
wrong in qemu with this process and the timer interrupt gets lost.
The counter blows right past the comparator without delivering its
interrupt, and thus the interrupt won't be delivered until the counter
is next reset in idle after exit from the busy loop, which is
obviously too late to interrupt the timeslicing thread.
Just replace the loops with a single call to k_busy_wait(). The
resulting code ends up being much simpler anyway. An added bonus is
that we can remove the special case handling for native_posix (which
was an entirely unrelated thing, but with a similar symptom).
[1] But oddly not the same emulated hardware running with the same
driver under the same qemu binary when used with a 32 bit kernel.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
System Power Management is only supported in Tickless Idle mode.
This patch modifies Kconfig dependencies to ensure System Power
Management option selects Tickless Idle one.
Fixes: #11046
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
If the idle code was detecting that it needed to sleep for less than
CONFIG_SYS_TICKLESS_IDLE_THRESH, then it would never call
z_clock_set_timeout() at all, which means that the system would never
wake up unless it already had a timeout scheduled! Apparently we
lacked a test case to detect this condition.
Honestly this seems like a crazy feature to me. There's no benefit in
delivering needless tick announcements. If the system has the
capacity to enter deeper sleep for long timeouts, that's already
exposed via the PM APIs, the timer subsystem needn't be involved.
But... we actually have a test (tickless_concept) that looks at this,
so support it for now and consider deprecation later.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit replaces exact time compassion by a range check, allowing
the tests to pass on platforms which needs rounding in __ticks_to_ms()
and _ms_to_ticks().
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Updated test description for tickless test cases, grouped test cases
as per doxygen requirements and some uncrustify's cosmetic changes.
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Remove unstructured and unused doxygen groups for tests. We will now add
doxygen comments per test function and follow a more structured
grouping.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For many tests, avoid splitting into files and put eveything in main.c.
For many of the tests, use main.c as the test source file to keep things
consistent.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added support in tests/kernel/tickless for ARCH_POSIX
and enabled this test for this architecture
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This patch updates tickless testcase replacing existing support
for Atmel SAM3X with support for the whole Atmel SAM family.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Arguments are not needed and in some cases are being set as unused in
the same function. The test_main function is called from ztest main
routine without any arguments.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Build issues caused by commit fe882f407d
which missed camel case conversion of _TimestampOpen, _TimestampRead,
and _TimestampClose.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Test whichever had Camel case defined for functions and variables have
been replaced.
Following warnings have been fixed in test cases as well.
- line over 80 characters
- Macros with flow control statements should be avoided
- Macros with complex values should be enclosed in parentheses
- break quoted strings at a space character
- do not add new typedefs
- Comparisons should place the constant on the right
side of the test
- suspect code indent for conditional statements
- Missing a blank line after declarations
- macros should not use a trailing semicolon
- Macros with multiple statements should be
enclosed in a do - while loop
- do not use C99 // comments
JIRA: ZEP-2249
Signed-off-by: Punit Vara <punit.vara@intel.com>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added test cases to verify tickless idle concepts defined in
https://www.zephyrproject.org/doc/subsystems/power_management.html#tickless-idle
Test points:
verify system clock recovery after exiting tickless idle;
verify slicing scheduler behaves as expected
Jira: ZEP-339
Change-Id: Ic0a86d725e9692aa217375cedc7396372a026a88
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Andrew Boie