We are not interested in whether the close() call succeeds or
not when the connection is terminated.
Coverity-CID: 198878
Fixes#16569
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
On some systems the sample was failing validation because
the coverage data would be emitted before the sample had
a chance to print anything else.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It does make sense to initialize USB console after USB Device stack.
Note that the value is selected only if we specify USB_UART_CONSOLE
in prj.conf, not in menuconfig afterwards.
Fixes#16518
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This extends the UpdateHub library code to allow the
use of IPV6 for communication.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
This extends the UpdateHub library code to allow the
use of CoAPS/DTLS for communication.
Refs: #13039.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
UpdateHub is an enterprise-grade solution which makes simple to
remotely update all your embedded devices in the field. It
handles all aspects related to sending Firmware Over-the-Air(FOTA)
updates with maximum security and efficiency, while you focus in
adding value to your product.
Signed-off-by: Christian Tavares <christian.tavares@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
prj_tickless.conf lacks the CONFIG_PM_CONTROL_OS=y option which
results in the sample failing to build with this config as it leaves
sys_pm_ctrl_disable_state() and sys_pm_ctrl_enable_state()
undefined.
Add the relevant options from prj.conf to fix the build.
Tested on nrf52840_pca10056.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
main.c in the sample was registered to the logger as 'log'. Changed
to 'app'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This changes the use of a static and fixed temperature value to using a
read_callback which will either return the previous dummy value or
gather real temperature data from a supported sensor (for now only
FXOS8700 which is available e.g. on a FRDM-K64F).
Signed-off-by: Daniel Egger <daniel@eggers-club.de>
Hardware PWM make sense for servo control even in a sample, add HW PWM
choice for NRF52 family, which support it.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Refactor wpanusb sample using new descriptor API, use endpoint index
instead of hardcoded endpoint address.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove duplicated execution path for composite configuration, USB
device stack initialization is done inside stack for both cases.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In order to unify the legacy and composite code, move the class and
vendor request handler buffer into the USB device code, just like in
composite mode. The option is renamed from USB_COMPOSITE_BUFFER_SIZE
into USB_REQUEST_BUFFER_SIZE and also replaces the USB_DFU_MAX_XFER_SIZE
and USB_HID_MAX_PAYLOAD_SIZE options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
I2C_STM32_V1 and I2C_STM32_V2 are Kconfig symbols used to
select STM32 I2C driver variant based on I2C IP available on a
given STM32 SoC.
Being SoC dependent, they are automatically selected in soc/
if CONFIG_I2C is set. Then there is no need to define them at board
level, nor for a specific application like this is done in
some sample or test applications. Remove these definitions when
this is the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As the prj_base.conf was renamed to prj.conf by commit
4e5300ba7f, the documentation
needs some fixing too.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
GATT long messages require buffers to store multiple packets. The actual
configuration for the bluetooth peripheral sample defines only two
buffers to store these messages. As the default ATT payload size is
18 bytes, the maximum payload size for a long ATT message is 36 bytes.
As the variable `vnd_long_value[]` has a defined size of 74 bytes, it
cannot be fully modified due to the 36 bytes limitation.
Set CONFIG_BT_ATT_PREPARE_COUNT=5 so all the maximum payload size goes
to 90 bytes and all the 74 bytes can be written to `vnd_long_value[]`.
Signed-off-by: Joao Cordeiro <jvcc@cesar.org.br>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Instead of using the now removed overlay files, use the SHIELD=
command-line option for testing the WNC-M14A2A modem.
Signed-off-by: Michael Scott <mike@foundries.io>
Sample walk through:
1. CPU 0 will wake up CPU 1 after initialization
2. CPU 1 will send to CPU 0 an interrupt over MHU0
3. CPU 0 return the same to CPU 1 when received MHU0 interrupt
4. Test done when CPU 1 received MHU0 interrupt
The wake up second core and private core ID are soc specific.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add a sample application that demonstrates how to use the ADXL362 with
data ready and threshold triggers.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
Add a minimal sample that showcases minimal ROM sizes. It can be built
in several configurations, all very restrictive when it comes to
features enabled in order to verify the fact that we can fit in small
devices and to be able to accurately measure the sizes of the kernel's
basic features.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit extends the CAN api can_send function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between sent masseges
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit extends the CAN api attach_isr function by an argument
that is passed to the isr callback.
With this extension it is possible to distinguish between filter matches
when they use the same callback.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
IWDG driver for STM32 doesn't support the callback parameter.
The patch adds necessary workaround for STM32.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Otherwise, it can lead to warning like:
main.c:80:10: warning: format '%d' expects argument of type 'int',
but argument 2 has type 'socklen_t' {aka 'long unsigned int'}
[-Wformat=]
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
sntp_request() was deprecated and superceded by sntp_query(), which
provides better time resolution.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Synchronising the init procedure to initialise the mesh
state only after the settings have been loaded.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Alexandre Bourdiol