Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
(Chunk 3 of 3 - this patch was split across pull requests to address
CI build time limitations)
Zephyr has always been a uniprocessor system, and its kernel tests are
rife with assumptions and outright dependence on single-CPU operation
(for example: "low priority threads will never run until this high
priority thread blocks" -- not true if there's another processor to
run it!)
About 1/3 of our tests fail right now on x86_64 when dual processor
operation is made default. Most of those can probably be recovered on
a case-by-case basis with simple changes (and a few of them might
represent real bugs in SMP!), but for now let's make sure the full
test suite passes by turning the second CPU off. There's still plenty
of SMP coverage in the remaining cases.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The intent of this Kconfig is to allow libc stdout
functions like printf() to send their output to the
active console driver instead of discarding it.
This somehow evolved into preferring to use
printf() instead of printk() for all test case output
if enabled. Libc printf() implementation for both
minimal libc and newlib use considerably more stack
space than printk(), with nothing gained by using
them.
Remove all instances where we are conditionally
sending test case output based on this config, enable
it by default, and adjust a few tests that disabled
this because they were blowing stack.
printk() and vprintk() now work as expected for
unit_testing targets, they are just wrappers for
host printf().
Fixes: #13701
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Qemu doesn't like tickless. By default[1] it tries to be realtime as
vied by the host CPU -- presenting read values from hardware cycle
counters and interrupt timings at the appropriate real world clock
times according to whatever the simulated counter frequency is. But
when the host system is loaded, there is always the problem that the
qemu process might not see physical CPU time for large chunks of time
(i.e. a host OS scheduling quantum -- generally about the same size as
guest ticks!) leading to lost cycles.
When those timer interrupts are delivered by the emulated hardware at
fixed frequencies without software intervention, that's not so bad:
the work the guest has to do after the interrupt generally happens
synchronously (because the qemu process has just started running) and
nothing notices the dropout.
But with tickless, the interrupts need to be explicitly programmed by
guest software! That means the driver needs to be sure it's going to
get some real CPU time within some small fraction of a Zephyr tick of
the right time, otherwise the computations get wonky.
The end result is that qemu tends to work with tickless well on an
unloaded/idle run, but not in situations (like sanitycheck) where it
needs to content with other processes for host CPU.
So, add a flag that drivers can use to "fake" tickless behavior when
run under qemu (only), and enable it (only!) for the small handful of
tests that are having trouble.
[1] There is an -icount feature to implement proper cycle counting at
the expense of real-world-time correspondence. Maybe someday we might
get it to work for us.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In the POSIX architecture, with the inf_clock "SOC", time does
not pass while the CPU is running. Tests that require time to pass
while busy waiting should call k_busy_wait() or in some other way
set the CPU to idle. This test was setting the CPU to idle while
waiting for the next time slice. This is ok if the system tick
(timer) is active and awaking the CPU every system tick period.
But when configured in tickless mode that is not the case, and the
CPU was set to sleep for an indefinite amount of time.
This commit fixes it by using k_busy_wait(a few microseconds) inside
that busy wait loop instead.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
bat_commit is an old and obsolete tag that has not been maintained over
time and was supposed to serve a purpose that is obsolete now. Also
rename core tag with kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit replaces _TICK_ALIGN correction in the test (which was based
on simple division), by more precise estimation using __ticks_to_ms()
and _ms_to_ticks() functions.
This commit fixes#8899.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
These tests had very small stacks, and the rbtree scheduler on
qemu_x86 (which does need a little extra stack room, though not much)
is bumping up against the limit. Increase by ~128 bytes in most
cases. In the case of the mbox_api test, there are other platforms
(which don't use the tree) which are right against the limit already
and will fail to link with a larger stack, so bump it for qemu_x86
only.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch do following things :
- fix checkpatch warnings
- replace conditions with ztest apis wherever necessary
Signed-off-by: Punit Vara <punit.vara@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This will prepare test cases and samples with metadata and information
that will be consumed by the sanitycheck script which will be changed to
parse YAML files instead of ini.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Patrik Flykt