CMake has several prototypes/signatures for the function
'target_link_libraries'. This commit migrates the usage of
'target_link_libraries' on Zephyr CMake libraries from the old 'plain'
signature to the new '<PRIVATE|PUBLIC|INTERFACE>' signature.
For technical reasons the two signatures can not be mixed. Each
library must exclusively use either the old or new signature.
The 'old' plain signature is equivalent to using the PUBLIC
signature. Migrating to use 'PUBLIC' is therefore expected to be a
safe change.
After the migration it will be possible to use the PRIVATE and
INTERFACE signatures on Zephyr CMake libraries. This is useful for
instance to fix issue 8438.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The Mesh specification doesn't support more than 32 transport layer
segments, the way the number was so far derived from the advertising
buffer count could result in a highre numbe than 32, thereby wasting
memory. Make the number of supported segments build-time configurable
through a new BT_MESH_TX_SEG_MAX configuration option.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Removed redundant and unused config options from conf files.
Added separate files for handing power management and device
handling functions.
Added the PM policy based on the next timeout event instead of
simply advancing to the next power state.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
If temperature value are out of range which is from 0x0320
to 0x4E20 then no relevant get message handler will execute.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added extra case under state binding's switch statement for
Lightness i.e DELTA_LEVEL. Also upgrade binding between
1. root element's LEVEL state & Light Lightness Actual state.
2. Light Lightness Linear state & Light Lightness Actual state.
3. Light CTL lightness state & Light Lightness Actual state
This is as per Bluetooth Mesh Model Specification 3.3.2.2.3.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now on reboot, NODE as client do not start message publishing
with TID = 1. Instead of that it would start with any random value
from 0 to 255.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Improved code readability by declaring some pre-processor
definitions in device_composition.c
Remove model_instance variable from some structures define in
device_composition.h & its relevant code.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update Vendor model message handlers & make it to work as per
TID like other Models defined by SIG. Removed union based data
extraction mechanism.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Updated state Binding as per PTS test requirements. Now if
gen_onoff_server & gen_onpowerup_server received Prohibited values
then they will not react on it further. Plus make necessary changes
wherever required for message handlers as per Mesh Model
Specification which is mostly regarding to default & range values.
Now right Status code would get publish in response to set lightness
& temperature range. Also upgrade Message handler
gen_delta_set_unack() algorithm as per PTS requirements.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed redundancy from state binding & make it simplified.
Avoid partial state binding in case of state_binding() function
get called with invalid or IGNORE arguments.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Changes buffer length for all GET handlers as per patter of
< 2 + parameters length (in bytes) + 4 >
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This patched improved architecture of already implemented Vendor
Model. Now there are 4 separate opcodes for Vendor viz;
get, set, set_unack & status. This helps to setup
<command + response> mechanism.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed TID implementations wherever it is not required as per
Bluetooth SIG Mesh Model Specification. Removed unnecessary
comments. Add status code value to get publish along with
Light Lightness range status message.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Update message handlers & correct nubmber of bytes that every
handlers should fetch for their further processing as per
Bluetooth SIG Mesh Model Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Make corrections in state binding of Servers as per Mesh Model
Specifications. Previously, when OnPowerUp state equal to 0x02,
then Light Lightness actual state was not assign to last power
down value. Plus when Generic OnOff state changes by client,
then Light Lightness Actual state value get assigned as Light
Lightness Last value instead of default one.
All these issues has fixed here.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This is a application demonstrating a Bluetooth mesh node in
which Root element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Generic Power OnOff Server
- Generic Power OnOff Setup Server
- Generic Power OnOff Client
- Light Lightness Server
- Light Lightness Setup Server
- Light Lightness Client
- Light CTL Server
- Light CTL Setup Server
- Light CTL Client
- Vendor Model
And Secondary element has following models
- Generic OnOff Server
- Generic OnOff Client
- Generic Level Server
- Generic Level Client
- Light CTL Temperature Server
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This test prints out to the console, when testing on real hardware,
parse output and compare to what we are expecting to avoid timeouts.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Two docs listed in the Samples an Demos TOC had the same title displayed
in the board-specific samples section, "Power Management Demo". Give
both sample docs a more specific title.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove build_only and add harness type needed for the sample/test to
allow running with sanitycheck and on devices once we have harness
support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is only necessary to link with subsys__bluetooth if the path
"subsys/bluetooth" is needed as an include directory. None of the
samples have this need.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Steve Brown <sbrown@cortland.com>
---
The updates to BlueZ' meshctl have not been submitted.
I am submitting this PR only for review. It could be committed
after the patches for the meshctl commands are applied.
Increase sleep time for main thread (1 sec to 1 minute) to keep SOC
in Low Power State for longer time. Currently nrf SOC is entering into
low power state and exiting immedately after 1 sec.
With this change SOC will wake stay in Low Power State till GPIO is
pressed or sleep time expired (whichever is earlier).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
This sample tesecase provides sample code :-
1. Triggers Low Power tasks into nrf52 SOC (CONST LAT and LOW PWR)
2. Triggers System Off state.
3. Wake up device through port Event by GPIO (Button 1).
Signed-off-by: Youvedeep Singh <youvedeep.singh@intel.com>
Sebastian Bøe