This patch adds the pci_enable_bus_master function that enables bus
master access for a PCI device.
Change-Id: I317daac1a613ccfc5a3894332c1a7dbbff05991f
Signed-off-by: Michael LeMay <michael.lemay@intel.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Change-Id: I819d13f0d7a23e3a61dcda6a3ced18810b192158
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
These x86 drivers are the last users of the PLB_* macros change to use
the sys_{in,out} functions.
Change-Id: Iebd0ad1bf5e74379498f86b24d835a0430db1311
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
No need to keep track of PCI class's bus and dev. First, there might be
more than 1 bus and/or 1 device which would hold the same class.
Secondly, with the new PCI_ENUMERATION option, enumeration PCI device is
now optional and it's advised to unset such option and statically
configure the PCI information of the devices (to gain in booting time
and code size). So finally removing all of this.
Change-Id: I395d08c8f6f5e76431af59aa6fc9b30d703f2e75
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Only one wrong is sufficient to fail the test: the found device is not
the one we are looking up to.
Change-Id: I2a54b5683fedf7d54de1e1553aecba40b6b6b2e1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help when debugging, since there might be different bus and
device on the same target.
Change-Id: I886a256f14a960d2faed71561416ee3bee20af1e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This option will be used to disable PCI enumeration (not PCI bus) to
gain in code size and execution as long as driver will be properly
configured statically. Thus setting this option as set by default.
Change-Id: I7da5d154c8ee89e44fc2bad8e85a5a20f498927e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful to enable memory mapped registers for PCI based
drivers that requires it. Removing redundant setting as well.
Change-Id: I52e47d01263a2de31c0c9f52ff65cc7e2734cf08
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful for PCI based drivers to integrate fully within
the device driver model, where they will have to provide the function
they are found.
Change-Id: I7d64a4c6727cee52cbcb743c859cda43ac1a853b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The new names reflect better what the functions do: they find the first
bit set starting from the least or most significant bit, i.e. they find
the least or most significant bit set, in a 32-bit word.
Change-Id: I6f0ee4b543f6f37c2f08f7067e14e039c92a6f6a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Standardize on using the find_[first|last]_set (non-inline) symbols
everywhere.
The non-inline versions provide absolutely no benefits, so they will be
removed in a subsequent commit, and the inline versions will have their
_inline suffix removed.
Change-Id: I5b3dee33ffe3878a05e1bb3c6400a8d8c1640ad4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: Ifb17f98bc12d3a28198810351629a109abdc18a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Added BAR (Base Address Registers) as a parameter for PCI scan.
Some devices (as UART in Quark) use two set of BARs for different
purposes. A driver may require only one of them.
BARs are numbered from 0 to PCI_MAX_BARS.
PCI_BAR_ANY means ignore the BAR number. Constants are defined
in drivers/pci.h
If device class is not specified as a scanning parameter, and
set to 0, ignore it.
Change-Id: I6b7116c5c6cf9c470ab22bec9eb74842f15b5d99
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This fixes many issues around PCI enumeration from old API:
- a static internal table was fed with scanning results, thus eating
memory, and worse: due to the limit of its size, scanning for new
classes was impossible unless growing statically the size of this
table --> more memory eaten! Not to mention PCI enumeration is done
once at boot time for driver initialization and that's all, so this
table is hanging around for nothing afterwards.
- one needs first to scan a class, then maybe he will be able to find
his device via pci_dev_find. Where all could be done at once.
- pci_dev_find was not trustworthy due again to the internal table. Now
if the device is not found, one will know it really went through all
the possbilities.
- still let the possibility for hard-coded BARs value on driver side
(thus no PCI scan required). However this is greatly advised not to do
so as BARs might change over a firmware/BIOS update.
Comparison:
old pci_dev_scan: could only filter out via class mask.
new pci_dev_scan: can filter out via a class, a vendor and device ID
(it could easily do the same for Function and BAR index as these are
usually fixed and informed through datasheet)
old pci_dev_scan: was limited in its findings by the size of the
internal result table.
new pci_dev_scan: can proceed through all the buses and devices every
time (there are optimizations to avoid useless work of course)
old results did not tell about the function or BAR index.
new one tells, and the structure has not bloated.
old internal code: was storing a big table of results
new internal code: is only storing a small lookup structure and an
array of Bus:Dev pairs for each PCI class for optimizations purpose.
(though, if needed, we could disable this through some #ifdef)
Usage:
- Have a local struct dev_info
- Fill it with what you want to look for, currently: only class and
vendor_id/device_id. Function and BAR index could be added if needed.
- Call pci_bus_scan_init(): this will reset the internal lookup
structure.
- Call pci_dev_scan(<a pointer to your dev_info>): at first call, the
internal lookup structure will pick up the informations from dev_info
and will try to find out what has been requested. It will return 1 on
success, or 0. On 1, your dev_info structure will be updated with the
found informations. If more devices can be found against the same
lookup informations, just call again pci_dev_scan(<a pointer to your
dev_info>) as long as it returns 1. When 0 is hit, it will mean you
found all.
Change-Id: Ibc2a16c4485ee3fed7ef4946af0ece032ae406e4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iee0936e2c92f2979b7e38f33a950108bdaf6f2c1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Instead of drivers/pci/, the public API headers will be found in
include/drivers/pci.
Change-Id: I577036660383e6bd9c015d6bbbcbc14bf8fb67ec
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding a line after variable declaration in order to comply with
the defined coding style.
Change-Id: Id41af88404bd37227bfd59a2d71ce08d0d6ce005
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Michael LeMay