Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Somehow through the process of enabling Galileo, we have partially lost
the functionality needed to enable I2C1. Bringing back the I2C
configuration options for I2C1 to the DW IP block.
Change-Id: I296bd9c3d167969df5b2fe17627633f5ec4b1ba4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The I2C1 device is currently using the older device initialization
method, and thus will not work.
Change-Id: If193f20275262abc3b08edd3a26679ae9ad39d94
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Changes the default IRQ priority level from 0 to 2 for the following
kernel configuration options as priorities 0 and 1 are reserved for the
first 32 IDT entries.
SHARED_IRQ_0_PRI
SHARED_IRQ_1_PRI
I2C_DW_0_INT_PRIORITY
GPIO_DW_0_PRI
GPIO_DW_1_PRI
SPI_INTEL_PORT_0_PRI
SPI_INTEL_PORT_1_PRI
Change-Id: I0fc821c68156eb1e1fe776b2bd4ff5890bba40e8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change-Id: I7e920e6de8f4b7a726c03c05edea3cbac69eb374
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I2276676142deea21cf8079449ce153f2fb887a8e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With ioapic_mkstub now taking a context value we can have a single isr
routine and move away from the isr trampolines we have now
Change-Id: Ibbb0f627ac515b12c0590a71da6a3267c952dd30
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Add a context value to the ioapic and loapic mkstub macros to allow
the developer to specify a context value that will be passed on the
stack to the interrupt service routines.
All the invocations for the loapic_mkstub and ioapic_mkstub macros
have been changed to pass in 0 so there is no functional difference
ATM. This change removes the need for drivers to have trampoline ISR
routines to pass a context vaule to their generic ISR routine.
This is the first step in getting rid of the hack where the driver
needs to look into the __initconfig_* linker objects.
Change-Id: I2c5eaa20d8cb5a42ef445762c426854be32c8452
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Naming convention uses the _ not - in the file names. In a recent
commit for I2C this for some reason changed. Making the names now
more consistent with other files.
Change-Id: I1e363c0c09ae0c8b2ac3def3beeaaeafcc01eb74
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Gets rid of the trailing initialization level character from the
name of the device variable generated by the macro, since it serves
no useful purpose. (The linker scripts place the various initialization
sections in ascending order based on the name of the section, so there
is no need to embed the initialization level in the variable name itself.)
Change-Id: I56bb79a513b8f77fb1f3fbaccec14454c2520772
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
With the introduction of generic transfer function, it is no longer
needed to specify read or write functions explicitly in drivers.
All read/write functions can now thus call the generic transfer
function to achieve the same result.
With this change, the transfer function becomes mandatory, and
should always be available.
Change-Id: Ia6fb98e58b84330a56a5d44ed3df9db42c3a5e88
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() For interrupt driven transfer, the driver already has
a generic transfer function, so this simply exposes it
for public consumption.
() The polling write is extended to support generic
transfer.
Change-Id: I657db8a6376282c723728b7a875813d389cf7d27
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Re-organize the steps involved in data transfer, according to
the datasheet's flowchart.
() Extract the common code for transfer initialization and put
it into its own function.
() i2c_write() and i2c_polling_write() are now using the common
data sending function.
Change-Id: Ieb90253ee10ddceb3b5d05b258e7fc6253d18729
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix previous rebasing errors (before merging) where deleted code
was reintroduced back. This causes the default configuration
in Kconfig to be ignored.
Change-Id: I29b246b1459136521d764127bf02e6d8e5aff30c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If using with shared IRQ, this function will be called by
the shared IRQ driver. So we need to check and bail out
early if the interrupt is not coming from the I2C controller.
Change-Id: I3c3ae3c22aa5cf312de5c22b35765749d6c5929d
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Such settings belong to Galileo and thus are set in Galileo Kconfig.
Change-Id: Ib9ec721fcc68e92521f8b7690c2640eeb82b2f4c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Call the callback when relevant:
- When STOP_DET if received
- On error
Change-Id: Id60190c6ac5c0b15a0a6cd3fb30b9cc41f2333e8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
On some platforms (e.g. Galileo), the I2C controller is on PCI bus,
which shares IRQ with other devices (GPIO on Galileo). This patch
adds support for utilizing shared IRQ.
Change-Id: Id4e4714aed37c2893d0ffe9ed1e4edaabb338121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This implementation will wait to write, and wait for transfer
to complete before returning from the function. Currently has
a default timeout of 100ms to prevent being stuck in the loop
waiting for hardware to be ready.
Change-Id: I0340fc6fed100f1d31c0306c5b0ab09689364f63
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The interrupt selectionss are no longer specific to a particular
controller (e.g. I2C_DW_0), but apply to all controllers on
the platform.
[DL: Extracted these changes into their own patch, instead of
being squashed with others. Also modified the Kconfig
options to move them into proper position.]
Change-Id: Idc7ac9769e947447b868dccf772a95dbb5fc8021
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This adds the Kconfig option to specify default configuration
for the I2C controller during driver initialization.
During boot, the controller needs to be configured before
communication to slave devices can start. After boot,
an app can re-configure the controller if needed.
Change-Id: I7bf252f75a31943ae444e4d914f3a9a1a3f3d91f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There are devices that need are part of the architecture core the need
to be initialized prior to devices that are integrated around a core
to make up a complete SOC. Namely the interrupt controller in the SOC
must be configured in order to allow the integrated IP blocks drivers
to initialize correctly.
Change-Id: I0a91e08f98516a7b7dd402ffc6494a071f1326b2
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
This macro is legacy from an early implementation of the init system
before the pure level was split into early and late phases remove it
now to avoid confusion going forward.
Change-Id: I6720874c840c9e14888fd6f411a8182e7420ca29
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Following the naming convention established, private functions
should be prefixed with an _
Change-Id: Ib6006ba3a928da88b8b8c3324f7d4b833f736270
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Many of the i2c functions continue to exist in a format of
<IP>_<interface> and will now follow the <interface>_<IP>_
naming convention.
Change-Id: Ic7ec879105f5c06f0213f8d771b3811253c49658
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Clearing an interrupt in DesignWare is done by reading the port
not by writing to it. Original problem found by Dmitriy@WR.
Change-Id: I1de052632ec36e2d496c563e81307169e9dabcf4
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The header file was renamed in previous commits, but the #include
referred to a non-existing file. This causes compilation error.
This uses the correct file.
Change-Id: Ibda7dbca82323d99dcff71cbee8f642f6cd611d6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes variables readable and consistent with other drivers
we have.
Change-Id: I816f133279497eafd5d5614013c8d224d5909590
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This driver naming is an exception which compared with all other drivers
we have. To keep things consistent the configuration options and variables
are renamed to <type>_<name>.
Change-Id: Ib95aa09630a507848f78d8f2c28706b545eed06d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was missing an include file, which caused the macro to not
be expanded correctly. Including init.h fixes the issue.
Change-Id: I6b190e0c75828d9b6eb42a84c213dfc174510740
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The code fragment to bind the instances of the I2C driver is not
platform specific but is driver specific.
All the information required to bind a driver instance comes from
CONFIG_ variables. Having the binding code with the driver code
avoids duplicating the code fragments in each platform where the
driver may be used.
Change-Id: I9ea132c9340437ccb292bb8f3fa3d3a2b2a794db
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Only 1 port is available on Quark through the PCI bus.
Change-Id: Ie0e0173686947134d2553dd0fd0230ffa5a1d456
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Since such controller is found on Quark x1000 (Galileo, ...), it will
need to get configured and/or enabled through PCI.
Change-Id: I16d00364edcb17653eaaf073e87b4e5850de7299
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using the OS provided sys-io functions for access to the registers
and lower level devices.
Change-Id: I1a88786189cbed0965f84146ffad9988a3b68a7b
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Initial import of Synopsis DesignWare I2C driver functionality
for the Zephyr Project. This import has been tested for host
master control. While it does contain the code to work as a host
slave, this code has not yet been completely tested and validated.
Change-Id: I3df0214f6e3b6798f7dad4819d09c3ec5998e508
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Adds the necessary changes to Kbuild and Makefiles to enable I2C
driver support to build.
Change-Id: I3113ccbbbbb4e06ef134ca73f509d2755a2abb59
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Dmitriy Korovkin