With the appearance of the nRF52840 IC a new Preview Development Kit
(PDK) board has been introduced. This patch adds basic support for this
new board.
JIRA: ZEP-1418
Change-Id: If5845e75312ec756b968e595e5dc31c4c9624be2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add board support for the Nucleo64 L476RG development board.
Change-Id: Ibb5424bc936c67a5d96855617202136d7dea772c
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add board support for ARM V2M Beetle platform.
ARM V2M Beetle board is build around the ARM Beetle Cortex-M3
based processor.
The support has been tested in nanokernel mode with the bringup
application that will be pushed with a future patch.
Jira: ZEP-1245
Change-Id: Ib05a40c072f10149e692283177387cf2cfe32f66
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Quark SE C1000 BLE Core is a nRF51822-QFAA, with 16kB of RAM and
256kB of flash. The configuration is otherwise similar to the Arduino
101 BLE, except that the UART RTS pin is the same as that used by
nrf51_pca10028.
Change-Id: I88cb18876bdde65abcf9a499894f70802046c824
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added Kconfig and makefiles to be able to build a Zephyr application
on Linux/gcc, and load via OpenOCD.
Validated by running the hello world, and philosophers microkernel
samples, and stepping through the code in gdb.
Jira: ZEP-1109
Change-Id: If5d3e7b1a8ecf5ecf6a00f147742b3bc5716190f
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Now that these platforms pass sanitycheck add them into the list of
platforms we support
Change-Id: If559c80e107505e6b98f81c0e94b9862618b1735
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for the STM32F401 chip on the board
Change-Id: I96c0799f3658ecea096fa5971bce9faf21919ee1
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This directive is the default, no need to have an ever-expanding
enumeration of these.
Change-Id: Ic5147fe04de033cb7e97fc5cbe45edd1779d1120
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The BLE core on the Arduino 101 is an nRF51822 QFAA (256kB flash, 16kB
RAM).
Change-Id: Ia802b3eb634c0cd6775c4059c9569bccd915a578
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Point to a new wiki page for the documentation. The old page can be removed
once this patch is committed.
Change-Id: I2b031bfffe10ec24c41c58d0754f2b14d95f5e53
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
The Zephyr documentation states that the ARM GCC embedded toolchain is
supported for ARM platforms so lets add a reference to allow sanitycheck
to build with this configuration. This patch fixes 4b554baa87
("sanitycheck: support for multiple toolchain").
Change-Id: I5578a3c78432219e2ba4d7393899d54c818c5c17
Signed-off-by: Tyler Baker <tyler.baker@linaro.org>
Added support for multiple toolchain usage.
Every arch contains a list of supported toolchain.
Each board can override the supported toolchain list.
If the board is not supported in the current toolchain,
will be discarded.
The current toolchain is defined by ZEPHYR_GCC_VARIANT.
Added support for toolchain ISSM and ZEPHYR.
Change-Id: I31e9b39ba01f6e9bdc4557702428cd09e05f492a
Jira: ZEP-592
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This enables sanitycheck to build for Arduino Due.
Note that there is no on-board bluetooth so bluetooth tests
are skipped.
Change-Id: I4f564e68ec65f01b7b33a32f6d0d7749290c0e5b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Shorten the name and remove the vendor prefix. No need to add
vendor to board names.
Change-Id: I68d441121c4034276706da63d7e5420ddf317149
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Setting up new platforms to handle emulation, and make them the only
ones able to run on QEMU from the Makefile "qemu" target to avoid
confusion with other platforms. We have now platform qemu_x86 and
platform qemu_cortex_m3, also modification to the sanity checks to have
qemu support only on those platforms
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I9291918a1d58fea4f37750ada78234628f9a5d98
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The online help ./scripts/sanitycheck --help describes usage.
Most users will simply want to run with no arguments.
Change-Id: Icedbbfc22599a64a6e3dbbb808ff3276db06f2e0
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adam Podogrocki