This option is meant to be used only for debugging. Use it to force all
traffic to be routed through a specific hardware queue. With this option
enabled it is easier to verify whether the chosen hardware queue
actually works.
This works only if there are four or fewer RX traffic classes enabled as
the SAM GMAC hardware supports screening up to four traffic classes.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The feature that used this symbol was removed in 18b07e09e0.
This is just a cleanup commit that removes the unused symbol.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Now that the RX packets are limited to the RX workqueue only, we can
reduce ETH_SAM_GMAC_BUF_RX_COUNT to 12 and still be able to receive a
full Ethernet frame. This reduces the minimum NET_BUF_RX_COUNT required
by this driver to 24.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Atmel SAM Ethernet module is using a scatter-gather technique to
exchange data with the Ethernet driver. To communicate the location
of the data buffers the driver sets-up a so called descriptor list. This
is effectively a place in RAM containing a sequence of 32-bit words
representing buffer location and its status.
Currently the cache coherency is handled using cache clean or
invalidate. Unfortunately this strategy only works correctly when the
corresponding data size is a multiple of the cache line. This is not
the case here and might lead to data loss or corruption.
Instead of using cache operations, this patch moves the descriptor
listed to the recently added non-cached memory region, as recommended by
ATMEL. A data synchronisation barrier is still required for writes, as
the non-cached memory is defined with TEX=1, i.e. it is not strongly
ordered. The descriptor lists alignment can be decreased to 4 bytes, as
required by the SAM Ethernet module.
The RX/TX buffer are left unchanged, still managed by cache operations.
Fixes#9812
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Kconfig option ETH_SAM_GMAC was missing it's dependency on
NET_L2_ETHERNET. Before this patch Kconfig was allowing users to
enable the driver, but the driver was not added because the CMake code
only adds the driver when NET_L2_ETHERNET.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit adds support for multiple hardware TX and RX queues.
The number of the queues to use can be configured through defconfig.
Packets are sent and received through different hardware queues
depending on their priority.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This adds packet timestamping support to the GMAC driver.
It is based on the eth_native_posix and eth_mcux drivers.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch adds support for reading MAC address from I2C EEPROM.
Only chips with 7-bit I2C device address are supported.
Change-Id: Ibedc33e54e33bdb901840e104063e2f4752b9123
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Networking stack has split one global DATA pool to RX and TX DATA pools
and also added net_buf pool support to each context. Update the driver
to support this new design. Since the GMAC TX descriptor list has a fixed
size but the number of TX DATA buffers is no longer limited updating the
TX descriptor list has to be guarded by a semaphore.
Tested on Atmel SMART SAM E70 Xplained board
Change-Id: I181e1cdd183e173b85d5d1711b6e78cd5165666d
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This is a zero-copy networking implementation of Ethernet driver.
Limitations:
- one shot PHY setup, no support for PHY disconnect/reconnect
- no support for devices with DCache enabled due to missing
non-cacheable RAM regions in Zephyr.
Tested on Atmel SMART SAM E70 Xplained board
Origin: Original
Jira: ZEP-1492
Change-Id: Ib944f91193efbd12c1142b0bcf1f635388bf1b87
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Tomasz Gorochowik