This replaces use of delayed fiber with nano_delayed_work which uses the
system workqueue fiber and stack.
Change-Id: Ie127fc5eb6f38b38df072154a702d4efc34ed9f4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Currently enable procedure can be called only once regardles if it
failed or succeeded.
Change-Id: I3869e97442720860baba7bb1b7610738ca95561a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for struct bt_storage being modified by stack.
Change-Id: I732cf94983a29de40d692e802d6a71b8986708df
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When doing LE SC pairing with Passkey Confirmation slave must wait
for remote DHCheck before doing comparison. This fix issue with
pairing as slave when passkey was first confirmed locally.
Change-Id: Iba780836341a944997adde24285b2e650b31afa1
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_recv should be used to send event back to stack.
Change-Id: I092e2480b3f0e5c40c0751c30be46d0310012bae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
DHCP client support provided for IPv4 over ethernet.
Change-Id: Ia89bc4123842cf109813b80a90b70cf50cc52e0a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Earlier default was 8, new default is 4.
Change-Id: I99c9d2aae465fd0feb968efa7417cd28bafd73b8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier default was 10, new default is 2.
Change-Id: I307a4abaad34223254fd32e1fd4357892a04a2d0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Earlier default was 10, new default is 2.
Change-Id: I938449d840a244a13e9b9b954648577b76db00bc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network context is similar concept as network socket.
Depending on application use, the number of contexts can be
now tweaked. Default value is now 2, it was 5 earlier. Using
the lower number saves 241 bytes of memory.
Change-Id: I6e2a9f053c8c63163af6d6175783233f67553ae9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This saves little over 4kb of memory.
Change-Id: I4dc3812b11de2736e2bdc17042e47fcdf5cf5491
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User cannot select CSMA mac driver any more in order to save some
memory.
Change-Id: I7805a1c2028f60bc8a428bd5b8f891d540a14b6d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ethernet driver calls net_set_mac before net_init is
called (ie before the uip stack has been fully initialized).
Unfortunately net_set_mac calls the function uip_ds6_set_lladdr.
Therefore this function is called before uip_ds6_init: this is an
issue as uip_ds6_set_lladdr is setting some static data which are
going to be erased by uip_ds6_init. In some case it could even lead
to a system hang due to a timer set twice.
To fix this issue net_set_mac should check whether net_init has been
already called. If not net_set_mac should simply copies the mac
address into uip_lladdr. Indeed uip_ds6_init automatically calls
uip_ds6_set_lladdr for the address stored into uip_lladdr.
Change-Id: Ifbcb07e7cd493b6284a85d70f2439d434cebbb00
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
The line below is wrong and useless:
lladdr->state = ADDR_AUTOCONF;
Indeed the three possible values for the state attribute are:
ADDR_TENTATIVE, ADDR_PREFERRED or ADDR_DEPRECATED. ADDR_AUTOCONF
is one possible value for the type attribute.
Moreover uip_ds6_set_lladdr already set the type attribute to
ADDR_AUTOCONF (this done through the call to the function
uip_ds6_addr_add).
Therefore this issue has been simply fixed by removing the line.
Change-Id: I432b7bb6a6a858264bb634f2e4d253f55acbbd5b
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Task can be preempted and bt_recv is expected to be atomic. Since
on microkernel with TinyCrypt ECC enabled this can be called from
task context we need to make it run in critical section.
Change-Id: I24414e8d98b0dfe8affc18058eb164ba0cba7b17
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If TinyCrypt ECC is used for LE SC calculations need to be done
in task to avoid hogging CPU from non-preemptible fiber. To keep
upper layers of stack independent of crypto used (TinyCrypt or
controller) this patch adds HCI ECC emulation.
If ECC emulation is enabled it is always used regardless of ECC
support being present in controller.
Change-Id: I7c5ca873a18c10237e1c0b2f09e6da2a75fb334e
Origin: Original
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes "No matching connection found" error when a packet
is received.
Change-Id: I9f9bba73f9858a9a3a45de26abd378d7c48aa9a7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
TCP client only sent one SYN and if that was lost, the connection
was not initiated correctly.
Change-Id: Iebb0b719a3d01d2e4f56ed911b3ed94643e53941
Jira: ZEP-385
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IP packet passing through 6lowpan compression and 802.15.4
fragmentation has an issue. (RFC 6282 and 4944) RFC4944, 5.3
says "fragment header's datagram_size and datagram_offset
values as the size and offset of the IPv6 datagram before
compression".
At the moment datagram size and offset values are after
compression. Due to multiple bearer (15.4 and bluetooth) support
and multiple incoming buffers support functionality is divided
to compression and fragmentation parts. And datagram size and
offset values for BT are after compression. Small packet (which
doesn't need fragmentation) doesn't go through this. So cacheing
compressed and uncompressed header lengths and with hdr difference
preparing fragments as per original buffer (total buf size and offset).
Change-Id: I9d3b0433e64964c68519d7c007cc06ec6035b573
Jira: ZEP-208
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add additional check which verifies that MAC address is given
and return -EINVAL if it is not set.
Change-Id: I90d415670c4b35d092ba057329f998df3a72018e
Jira: ZEP-213
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application can initiate TCP connection when using IPv4.
Change-Id: I264270d013f567dd0c429783c47506d9c38f0509
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The application can initiate TCP connection when using IPv6.
Change-Id: I632fa2559d5deb40d71288762bd13fbc2aac9cc7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are initiating a TCP connection, then make sure that
we try to re-send initial SYN packet (max 8 times) if it is lost.
Change-Id: I9fbc39bdaef3a535c480eb5433eb7ef3ad60d604
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will be used in following commit.
Change-Id: Ie4fccd72471c285b68a6df6970babe562e5e6258
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If application calls net_send(), set the retry count to some
low number (currently 5) so that we do not wait forever but
eventually we try to send the data properly.
Change-Id: I8103246ac9227a0cf70b56aecab6ed8307877e19
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These changes are needed so that Zephyr host can initiate
a TCP connection to another host.
Change-Id: I46b92bf978e2dd04993951f2215d179a5cf1bd55
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These are internal functions needed when initiating a TCP
connection.
Change-Id: Ide5d59ac9854ec8bdea3baa97b3cde3ffa6a5e0f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Application can by default do a connection request. If this is
not needed (app is only working in server role i.e., only
listening connection attempts), then some memory can be saved
by disabling client role support.
Change-Id: I33ed95ad0cf099a70563465beff555ec4adab958
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simplify l2cap_chan_get() in l2cap.c file by removing
CONFIG_BLUETOOTH_BREDR preproprocessor check. Now function serves
only getting channel on LE transport.
Change-Id: I20b72f352ad9d5998cc812b28cb3d6951f91f212
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds support getting L2CAP information about remote features. To get
the response local stack gets call information request about 'extended
features supported mask' after ACL link is established. Then in
response if 'fixed channels' bits are enabled, next information
request is sent to get details about 'fixed channels'.
Change-Id: I4980c61b12e83fef914e97dea296b0a848d59034
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The function gets 32bit-wide data from net buffer and converts the
value from little endian to host order.
Change-Id: I2d2454951b3ac39686a25454678ce92d8a1a0f3d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds support to handle incoming L2CAP information request from
remote to get local information about 'extended features' and 'fixed
channels'. For now local stack ensures support for L2CAP BR/EDR
signalling channel.
Change-Id: If8c9c9dd041b45a79db5e560394dcd2778176f55
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The function gets 32bits wide data, converts host order to little
endian and then puts the data on protocol stack to be send.
Change-Id: I29e4040b302a16b551a0922133c327ff694fec5d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Use appropriate scope for 'random' and remove unnecessary empty lines.
Change-Id: Idb8d527fa0a88ca738e91887b56a123a5a8831ce
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Separates LE and BR/EDR L2CAP signal channel context and starts accept
incoming PDU traffic on BR/EDR signal channel. For now all valid L2CAP
commands are send back as rejected on BR/EDR signal channel.
Change-Id: If4392b2d3ccbe157cb7eeafcaa0804e90f44e2be
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
It is valid to call set_ad with NULL data as long as length is 0.
Improve code comment for unusual condition check explaning why it
is correct.
Change-Id: I29440fb04747f6df06dc4df466eb43e160ff3be4
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Adds implementation of the BR/EDR connection L2CAP notifier. It makes,
for each registered BR/EDR fixed channel, basic validation and channel
initialization using two local helper functions.
Change-Id: I6393a43b25ff0d9f23deaf93562add08861ea1d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Moves, specific for BR/EDR transport, register fixed channel handler
to l2cap_br.c file and make it local. Then using it register BR/EDR
signal channel (CID 1) context during channel layer initialization
in 'bt_l2cap_br_init'.
Change-Id: I5e23fc5d43ae3d7838ecb44ad4fa631eccc8cb4c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds dedicated function informing L2CAP layer about established BR/EDR
connection. Existing 'bt_l2cap_connected()' connection notifier is
refactored to use new API 'bt_l2cap_br_connected()' which is implemented
in l2cap_br.c file.
Currently the new handler is just stub since proper internals of
BR/EDR L2CAP signal channel management are not yet implemented
in l2cap_br.c file.
Change-Id: Idef9be63338c6bb4b3315ec0452d84f2431fbaa2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Moves initialization of signal buffer for BR/EDR transport to
l2cap_br.c unit and removes existing references to signal buffer in
l2cap.c file to prevent compiler complains.
Change-Id: I784b926df814e632944f3a12b0b6d03d144d2438
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function returns TC_FAIL and not negative value on failure.
Change-Id: I36e51e39aca07264339fc6c10a9c2b8db61b580d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The application can return BT_ATT_ERR_AUTHORIZATION on the callback
already so there is no reason to have it as a permission as once set
it always fails.
Change-Id: Ia634e3f313993dd36c06bff48f36d4ddf1264376
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Only 8 random uint32_t digits are required by ecc_make_key function.
Change-Id: Ib0b4d6923b339828281e13b2a1d960d3bb72e65a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Code shall not have more than 80 columns.
Change-Id: I2ba53c971be1d6936b5092d86c1e2196c100339e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the license to the loopback driver header
Change-Id: I9cb2d93c8de6fe490912684fc3dfb20526be812d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
When pairing procedure ends regardless of the status, reset flags
strictly related to pairing phase and reset security level.
Thanks that next authentication will get known initial pairing 'context'.
Change-Id: Ie3108c6e28e136ea929e564a6820675cc770cb95
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Using send_sync lets us return an immediate error to the application
if the HCI command fails. This also reduces the pressure on available
buffers since we don't allocate multiple command buffers before
starting to process the command queue.
Change-Id: I5613e4e9dd8dcc0db45bad051d7c4980b49e428d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no need to open code this as we have helper for this.
Change-Id: I77ab39206d0c5b10f30624e90e864192b9519d0c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If adapter is using Static Random address as Identity Address and
privacy is disabled we need to restore correct random address (ID)
before creating connection. Otherwise NRPA used for active scan
could be used resulting in SMP confirmation failed due to invalid
initiator address being used.
Change-Id: I7201890ab9475ade3a825f9ea791a30af6b657a5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Both initiator and responder addresses are already set during
connection creation so there is no need to set responder address
again.
Change-Id: Id477a9e6dd2244c57126d1f985aa41cd1b04650b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
New connection needs to be added only for slave role. For master
connection object is created when LE Create Connection is send.
Change-Id: I24dbfc4b3a647ea230b199fbec09940f486b983f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add support for the 32-bit timestamp (1/10th ms units) extended
header.
Change-Id: I67f481a35be6878605b8c2256f6e4bfb6afe55c8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes code simpler and easier to understand as generating RPA and
setting random address are done in same place.
Change-Id: I1f9ebdf3ee322921258c92f3f1a40d6b7764b2fc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If anything went wrong just report connection failed. This makes
code easier to read and less error prone. Also makes sure that
scanning is reenabled with correct parameters on failure.
Change-Id: I7387571f6dbf308511694a635aa47d5371a81616
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If bt_smp_create_rpa failed connection object needs to be unreferenced.
Change-Id: Ie1f2905cafbf15db2970c0f07748d016cbe55c2b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
timer_expired uses the nano_timer_test API to determine whether a
timer has expired. This API calls the private function
_nano_timer_expire_wait which returns the timer user data if this
timer has expired. Unfortunately _nano_timer_expire_wait clears the
user data pointer after returning it.
Therefore if timer_expired is called several times for the same timer
and if this timer has already expired then only the first call returns
the expected value (true). Other calls always return false.
In ipv6 this bug can be seen with the uip_ds6_periodic timer. Indeed
when expired this timer is going to be checked at least twice by
etimer_process function and the tcpip eventhandler function. Thus the
final uip_ds6_periodic callback is never called.
The fix consists in adding a expired field in the timer struct and
make timer_expired retain the nano_timer_test result when the timer
has expired.
Change-Id: I3c6aceaa0627be264b6d9913b629e7b619888938
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
In ipv6 the type field of the ethernet header is
left blank and the net buffer size is not updated
with the ethernet header size. Therefor outgoing
ipv6 packets cannot correctly be received.
In ipv6 these two fields are updated by the function
uip_arp_out. However this function doesn't exist in
ipv6, therefore net_driver_ethernet_send has to take
care of the ethernet header.
Change-Id: Ib883a6553786d74dd2a5bca6893a0501f04ce7f4
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
1 tick (10 ms on most current boards) doesn't seem to be enough to
completely eliminate the HCI_LE_Rand bug. Increase the delay to 20 ms
(i.e. 2 ticks).
Change-Id: Ibe87d5e4b2ec43b2f96afb2c4e0ac726ffe99bd6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no reason to keep these in hci_core.c. Also remove the
duplicate bt_conn_update_param_le() and make bt_conn_set_param_le()
static since it's only accessed from within conn.c.
Change-Id: I1234e9d2e5d1d367732a7b66965cf10a338c07fb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If Static Random address is used as Identity Address and local privacy
is not used, responder address for slave connection was not set to
Identity Address.
Change-Id: I7a057c0fcb8e6d7e043952a092d16e959841f792
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
For some reason the HCI init procedure doesn't complete on the Arduino
101 using the MyNewt HCI firmware if we send HCI_LE_Random commands
too quickly (which probably is crashing the nRF51 RNG, or something
similar). Adding just a tiny delay makes the init complete reliably.
Change-Id: Ic87a965b0e5cb265a2bee09e23d337d741527773
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enables API to register PSM server on BREDR transport.
Adds l2cap_br.c file responsible for BREDR specific functionality to
build path based on Kconfig selection.
Change-Id: I92823b0207ab0da96bfb813353de9f95fa5dd0f4
Origin: Original
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The monitor protocol handling needs to be initialized very early on,
e.g. before HCI driver registration. Use the same priority as used for
other console handlers, except we don't expose this as a Kconfig
option for now.
Change-Id: I61157d62327080eeac7a59bb64e5a18877cc26f6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
iOS BT stack has a bug in LE SC implementation. If EncKey is not set in
key distribution it sends Pairing Failed PDU if any (?) keys were
distributed. This wasn't visible before as without local privacy no
keys were distributed for LE SC with iPhone.
Change-Id: I36c2398ea821c6048d970b93a58189eb466ea434
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is not mandatory but makes sure that TX fiber is wakeup
as soon as possible to send the actual IP packet.
Change-Id: I48fb8a5e428f67e249ba0ea2c0f14b0d512f148b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 header compression is temporarily turned off for TCP
packets because of stack limitations when a packet needs to
be resent.
Change-Id: I572f177c727aa39757afebdc594cc07c8d8a1bd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently we can only be a server that listens TCP data and
can send back data.
Change-Id: If009b7cb608029a8fb3889772fe15e45a154679d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Initial import for some new TCP related files from Contiki.
Fixed the compilation of imported TCP code but actual TCP
support comes in following commits.
Origin: Contiki
Change-Id: I0b42e2fa11de15f9b4da53e369cf114fcfd6cd21
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compiling without the drivers prefix causes the following type of
compiler error:
include/uart.h:42:21: fatal error: pci/pci.h: No such file or directory
Change-Id: I99cd814708e74ed4722e5e906819497010263337
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is more of a convenience to let the driver identify itself in
debug logs and the monitor protocol.
Change-Id: I73351477e98d45d6344c180b8088bde29df6f7d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bus that we notify over the monitor protocol is really driver
specific, so let each driver specify their bus type.
Change-Id: Ic3a086fcc06352dbf051e52cef5bf6b8696349ae
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
With most boards there's no simple way to get access to the HCI
traffic. Simultaneously these boards only have one external UART for
the console. This patch introduces a protocol which combines both
normal logs and HCI logs over a single binary protocol sent over the
console UART.
The protocol is modeled based on the btsnoop/monitor protocols used by
BlueZ, and the first tool that's able to decode this is btmon from
BlueZ ("btmon --tty <tty>").
For platforms with two or more external UARTs it is still possible to
use CONFIG_UART_CONSOLE as long as the UART devices used are
different, however on platforms with a single external UART
UART_CONSOLE should be disabled if BLUETOOTH_DEBUG_MONITOR is enabled
(in this case printk/printf get encoded to the monitor protocol).
Origin: Original
Change-Id: I9d3997c7a06fe48e7decb212b2ac9bd8b8f9b74c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Processing command complete and status events in separate fiber is not
really needed as those handlers doesn't block nor do heavy computation.
This work can be done directly from ISR making code simpler.
Additionaly priority fiber stack is no longer needed resulting in 256
bytes memory savings.
Change-Id: I2ecb29b720d3a886e7881a2208f697a834f4cdaf
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to gracefully handle case when privacy is not enabled.
Change-Id: I3f4ebafd05abe186212b554161d8a8982f58ff45
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We should always use RPA for outgoing connection if privacy is enabled.
Otherwise privacy might be compromised if connecting to devices that
don't support pairing.
Change-Id: Ib12a5d9dfdc9285b5ff721f0fdb8f824ff1a8f0f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
set_random_address already checks if current random address needs
to be updated so there is no need to double check that before it
is called.
Change-Id: If5fe16f1b886aa877bf014a8977ccaea2c8ba6e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
hci_le_create_conn sets controller random address to one from
connection so there is no need to do that again in command status
event.
Change-Id: I22a24a46946413489445e577341cbf6ea68c0964
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for special handling of command complete when
using bt_hci_cmd_send_sync for sending HCI command.
Change-Id: I60671e490958e67f5d20dc8c6ddbf51ca839c338
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There is no need for special handling of command complete when
using bt_hci_cmd_send_sync for sending HCI command.
Change-Id: Ib67f06d47249d24854c07be34b0e39f70f5d5170
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes function flow follow common error handling convention
err = foo()
if (err)
return err
Change-Id: Ifa3f44e3857b50436212cd5ed240795b220f8a15
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Luiz Augusto von Dentz