The .elf files sent to QEMU boot from __start, the reset vector
is completely ignored.
Change-Id: Ib436547bcb1c0154b5c23638dfdaf59627b109ea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Attached PCs can read these messages with the 'nios2-terminal'
application.
Change-Id: I44942c8feaf3901adb410269460787cf2a8b6a4a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Useful at this stage of the bring-up. Stack memory will be initialized
with 0xaa and we build with -O0.
Change-Id: Icd0e9ac49c0158f7b18e4e286a07ca281d20e7e6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Has extra debug capabilities and the board has sufficient space
for it.
Change-Id: I638c665e766f1a41dc5db89fcf8b8c0d44912789
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Use a kbuild trick to force built-in.o to get built even if there isn't
any code so we can link properly. This is cleaner than keeping around
files that don't do anything.
We keep around board.h for now since drivers and other code might expect
it to exist.
Change-Id: I0fb1105f19149b0e17c45455368ddf0ef75e5165
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The KSDK device header files require a preprocessor macro that defines
the part number string (e.g., MK64FN1M0VMD12). Create a hidden Kconfig
option to hold the part number string, and hidden Kconfig options that
the board Kconfig will use to select the specific part number.
Change-Id: I612e785026261e425b47b5b7fae0c65b4f94b30b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For the moment, NIOS2_CPU_SOF must be set with the path to the
CPU configuration. We are checking with Altera on whether we
can directly check in the binary to the source tree.
These scripts depend on tools provided by the Altera Quartus
Prime Lite Edition. This is available for free but requires
registration on Altera's website to obtain.
Change-Id: Ia6cb6c9e43c3e141807a887cb25c47b370a7d8e9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I see in the TOP makefile that if FLASH_SCRIPT is undefined,
it outputs the message "Flashing not supported with this board".
This behavior is wanted currently as this board does not
have a memory mapped FLASH device. It has a SPI-FLASH and
there are different instructions for putting an image on to the board.
Change-Id: I07dcdd9a7fd8346b846ee0fe1312d22f9ffaa13e
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Do not redefine the the pinmux configuration for the board, just use
the data directly. No other board will be using those, just the galileo.
Change-Id: If774bc5c4335021ae58a682224f092db23bc9f1b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move pinmux defintions under board/<board> and have all board
configuration in one single place.
Change-Id: I055b024384fae2938881b1c57d8ce7426e732e92
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
the flow control and baudrate configuration is for BLE, so
make this dependent on BLE being configured.
Change-Id: I35f8e00ac31658fb1ad4a2751169c076f1e78532
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Board support for the ARC EM Starter Kit provides for a board
that can select one of two SOCs. The EM9D and EM11D commits
will be done separately to expidite review. Also submitted here
is doc/board/em_starterkit.rst to explain details about this
Zephyr board choice.
Change-Id: Icd9fac045c700ad8dcb95161fdd63c130f665778
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Now that we have QMSI sensor subsystem drivers, lets use them.
Change-Id: I1776178ad6fb984d6e293dbfa8bb1d718e4c2566
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixed openocd configuration to accommodate new releases of the hardware
Change-Id: Ic87193c3980f4caf2fec1fdcf79d8bd30dbf4f8c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update openocd configuration file allowing to flash with make
flash for the majority of boards. Old versions still might be flashed
with zflash. This also helps debugging boards.
Change-Id: Ie9701c09e1806e0c4de39f95bd34bce9f66051cc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The factory defconfigs should be used to generate images
compatible with the factory settings and the bootloader that
comes with the Arduino 101.
When using those images, you will be able to keep the original
bootloader and flash the images using dfu-utils and there will
be no need for a JTAG adapter.
Jira: ZEP-219
Change-Id: I34b5e9ef73314f46b31086a772d94d3ddcc6c436
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To boot zephyr on the Arduino 101 running the original bootloader
which supports DFU, set the following in your application configuration
file:
CONFIG_SS_RESET_VECTOR=0x40034000
CONFIG_PHYS_LOAD_ADDR=0x40010000
CONFIG_VERSION_HEADER=y
Jira: ZEP-219
Change-Id: Ia015a7b6fce888b49ed22c558de992132d4713ea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enabling individual I2C controller is done in the SoC kconfig defaults.
There is no need to do that in the board defaults.
Change-Id: I45a62d8bc96a5f42b3fd613f5890bcdf04c92032
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove hardcoding and make the values configurable. Also make the
Kconfig variables consistent with other architectures.
Change-Id: I69334002303d4d8abaf7363d9134fd5f46ce4eeb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding an openocd.cfg to control flashing of the Nucleo-F103RB board
Change-Id: Ia730244bdc2d31d074fe72c41d3e58e7830c8df0
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On current Curie-based boards UART 0 is wired to the nRF51 BLE
controller and requires HW flow control to be enabled in order to
function. This patch restores the same behavior that was present
before the "qmsi: uart: use built-in qmsi driver" patch.
Change-Id: If7ea347f5ab8b460f39123dcc0d75d711a5a1c2a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do not have priority per IP, use one config instead.
Change-Id: Ieb2923d4749a294e2a1c677d47d56a14cee3f36d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
With most boards there's no simple way to get access to the HCI
traffic. Simultaneously these boards only have one external UART for
the console. This patch introduces a protocol which combines both
normal logs and HCI logs over a single binary protocol sent over the
console UART.
The protocol is modeled based on the btsnoop/monitor protocols used by
BlueZ, and the first tool that's able to decode this is btmon from
BlueZ ("btmon --tty <tty>").
For platforms with two or more external UARTs it is still possible to
use CONFIG_UART_CONSOLE as long as the UART devices used are
different, however on platforms with a single external UART
UART_CONSOLE should be disabled if BLUETOOTH_DEBUG_MONITOR is enabled
(in this case printk/printf get encoded to the monitor protocol).
Origin: Original
Change-Id: I9d3997c7a06fe48e7decb212b2ac9bd8b8f9b74c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This UART config is needed to handle properly btp tester serial data
flow.
Change-Id: Id013a232e105247414d44148f5ccfe708b19c4a8
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
Change NBLE_UART_ON_DEV_NAME to BLUETOOTH_UART_ON_DEV_NAME for H:4
Change-Id: I4391b32c75c738478c964d4c79f6eb80d737b043
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable Power Management handling also for quark_se_devboard with
nimble HCI stack.
Change-Id: I6e5bb85c4f2370f52904be9dff14ce8e7fb1eb44
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enable Power Management and enable logic for quark_se_devboard,
without the patch BLE Radio module might be enabled with JTAG tools
or right after boot.
Note that some boards do not have the GPIO pins connected to BLE
module but this should be still OK wrt to board functionality.
Change-Id: I9019e406afa36fe2dea52c07075c947e8c50a961
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Andrew Boie