s/System Power Management/System Managed Device Power Management/g
System Power Management is confusing and does not tell
anything about device. Change it for something more explicit.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for supplying a broadcast code to the
broadcast audio sample, which will, if non-empty, encrypt
the broadcast.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A few lines above this change explicitly enable the UART FIFO. Then this
line, goes and disables it. This seems to be from a workaround where the
parity and stop bits are not coming in correctly in the config. Fixing
that will be another patch. But, the FIFO should always be enabled. This
is visible when trying to use bit rates that are reasonably fast. Even in
IRQ mode, with a sufficient bit rate, bytes are readily dropped.
Tested on a Sparkfun Promicro rp2040 board.
Signed-off-by: David Brown <david.brown@linaro.org>
This commit fixes 'test_verify_send_report()' function as it was
not properly waiting for a MLDv2 report after sending a query. The
asserted value was set for the previous report sent after joining a
group.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit fixes an issue where due to inverted logic (static function
returned 0 on success but the caller expected true/false) the MLDv2
reports were silently dropped.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
@Desvauxm-st is now retired and @ABOSTM is not working anymore on Zephyr
since some time now. Remove them and add @ajarmouni-st, which has been
contributing for some time now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Automatically select CONFIG_GPIO when the GPIO-controlled CAN transceiver
driver is enabled. Update board configurations to benefit from this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added a check for checking duplication when adding a source in the
broadcast assistant, as per requirement in BAP 6.5.4. It is not
permitted to add a source such that a combination of broadcast_id,
adv_sid and address type would result in same triple of values.
Added a recv_state struct to cache these values when read, and moved
past_avail and srd_ids into this as well.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add pa variant definition to board.yml
Add bl654_dvk_nrf52840_pa files dts, yaml, defconfig
Update doc with information on variant and regulatory information
Signed-off-by: Jate Sujjavanich <jatedev@gmail.com>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a harness to avoid twister waiting for results on the UART, which
won't happen unless there is a connection established to a remote
Bluetooth device.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add SWD debugger support for this board. Although there is not a debug
header, the SWD pins are accessible and the adaptor is not that difficult
to wire up. This will allow for debugging beyond just flashing, that the
UF2 programming setup allows for.
Signed-off-by: David Brown <david.brown@linaro.org>
Update hal_nxp reivison to pull in the following patches:
* mcux: hal_nxp: include HAL ESAI driver if Zephyr ESAI driver
is enabled
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Added clarification on AES-CMAC usage in DFU metadata, emphasizing its
sole role as a hashing function for the incoming composition data hash.
Notably, it utilizes a fixed key and is not employed for encryption
purposes.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
In preparation for adding AMP support for i.MX RT6xx family we need
to rename existing cm33 support files to more specific names.
e.g mimxrt685_evk.dts -> mimxrt685_evk_mimxrt685s_cm33.dts
This will allow us to later add support for Cadence DSP found on i.MX
RT6xx series.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Add hostname changed printout to event monitor. As the name
says, it is generated when the hostname of the device changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Starting with b1d24e425c (net: lwm2m:
device object: optionally store error list in settings), it was no
longer possible to build the code with coverage enabled when the
settings subsystem was disabled.
The build would fail with an error like this:
> subsys/net/lib/lwm2m/lwm2m_obj_device.c:262: undefined reference to
> `settings_name_steq'
This fixes#70923.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Add `gdb_q_packet` function to handle proccessing of query packets. Also
add `gdb_qsupported` function to serve as a single place to process and
respond to `qSupported` packets.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Make the current gdb loop enum public under the name `gdb_loop_state`.
This will allow for extending the current stub with further
functionality in the future as new features will require control over
the loop state.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Cf Errata sheet, 2.2.4: With HSE active, switching the system clock source
from any other source to HSI, spuriously deactivates HSE.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
In case of chain loaded application with PLL set as the sysclk source,
directly exit the init function.
This also applies to exit from stop mode and was tested successfully.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Update prj.conf so that
subsys/net/lib/sockets/socketpair.c
is pulled into the build and zsock_socketpair() is
properly defined.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The code was assigning a pointer to a scoped buffer to
an object outside that scope. This would cause the driver
would receive garbage instead of a well-formatted IE and
would likely reject the IE. This in turn caused CSL IE
not being included in enhanced ACKs (verified with
wireshark).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Generate a sitemap.xml for the documentation.
This aims at helping search engines react faster to the addition/removal
of new pages.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixs USDHC by setting PWR and CD gpio's correctly.
Adds missing button from the GPS module.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
According to the `RFC8415` the length of the DUID is at least 1 octet
up to 128 octets. Now a user can choose buffer length without the need
for source code modification.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
For BR/EDR L2CAP, if the function bt_l2cap_br_chan_send_cb
instead of bt_l2cap_chan_send is called, the ACL conn and
L2CAP chennel status will not be checked.
Check conn/channel status before sending data in
function bt_l2cap_br_chan_send_cb.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
There are required DTS entries to nable peripherals required
for IPC communication between Radio and APP CPUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There was missing storage partition that is required for setting
subsytem. Add missing entries to board files.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There are default configs that are provided by default for
e.g. nRF5340dk to enable HCI IPC communication type for
application domain and enable BT controller for radio domain.
These configs were missing for nRF54h20 DK.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Clarify usage of __rom_region_end/size in XIP system.
When PMP is enabled, __rom_region_end should be padded to meet the
requirement of PMP entry, and the actual ROM region usage ends at
.last_section instead of __rom_region_end.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Updated ROM region padding to utilize LMA instead of location counter,
because the location counter has been assigned to 'RAM_BASE'.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Flavio Ceolin