Use dedicated function for calculating stack usage of the
interrupt stack(s).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add option to include analysis of interrupt stack(s) when
threads are analyzed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extracting stack usage calculation from k_thread_stack_space_get to
z_stack_space_get so it can be used also for interrupt stack.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
STM32L5 has option to disable dual bank support.
When this is disabled, the flash page size is changed
from 2k pages to 4k pages. This PR adds support for this
diversity.
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
Add power management constraints to the entropy driver.
This prevents the hardware block to lose it's clock when
going into any stop mode of the cpu, which would cause the
clock error flag to be set while filling the pool.
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
Add Kconfig switch to disable automatic eSPI slave boot
acknowledgement.
This allows to perform lenghty operations before continue any eSPI
handshake with eSPI master.
Required for eSPI SAF boot configuration.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Currently pwm_npcx_pin_set() disables and reconfigures the PWM
controller every time its called, causing the PWM line to pulse even if
only the duty cycle is changed.
Modify the function so that controller is only disabled if any of the
configuration has to be changed, only set the new DCR otherwise.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Due to serialization restrictions radio api calls cannot be nested, any
violation of this rule leads to a deadlock. This commit fixes the bug
by transferring the nested radio api call to ot_radio_workq.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
If a chosen entry exists for a memory area of type OCM, zero the OCM
memory's bss section at boot-time.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
Add the extern declarations for the data and bss sub-section start and
end markers for memory of type OCM, so that the bss section within the
OCM memory can be properly zeroed at boot time.
Signed-off-by: Immo Birnbaum <Immo.Birnbaum@weidmueller.com>
There is no releavnce between CAN sockets and offloading that would
prevent one from working with another, therefore it's not right to
allow CAN sockets to be build only if offloading is disabled. Fix the
wrong dependency in socket CMakeLists.txt file.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added a missing assert statement for validation of the preferred
supervision timeout parameter which can be configured by the user
via Kconfig.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Minor improvement: Use already existing variable, rather than finding
the same value again. It is clearer, and simpler, to use the variable
everywhere this value is needed.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Avoids copying the address and assigning the SID if the
PA list is used, as the values are ignored by the
controller, and thus there is no reason to copy
or assign the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The smp_process_request_packet has been checking return code from
mgmt_streamer_init_writer where Zephyr implementation of the
callback always returns 0.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Follows #41918.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Follows #41918.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Follows #41918.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data and
dev->config instead.
Follows #41918.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Fix bug in radio implementation that reported any transmit error
as `OT_ERROR_NO_ACK` to OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
This is to support Sypnosys Designware SDMMC controller read and write
operation where the buffer address is needed to be 16bytes and 512bytes
aligned. Adding macro FS_FATFS_WINDOW_ALIGNMENT to align the "win"
variable address in FATFS struct.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Update west.yaml to the commit consist of the new config option
CONFIG_FATFS_WINDOW_ALIGNMENT to align the win variable with
specific alignment
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Similar to Kconfig turbo mode, add a Devicetree bindings turbo mode. In
this mode, the Devicetree bindings pages are not generated. Instead, a
page with dummy symbols is created. This takes ~1K pages out of the
build, resulting in faster builds. This mode can be useful while in
development or CI PRs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch adds GPIO and 96board LS (Low Speed)iexpansion connector
support for SiFive HiFive Unleashed and also enables GPIO basic test.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Add pwm-0 to support tests/drivers/pwm/pwm_api.
Solve tests code runtime error on it8xxx2_evb:
1.If the pwm channel target frequency is < 1, then we will
return an error code.
2.If the target_freq is <= 324Hz, we will configure that this pwm
channel need to output in EC power saving mode.
In test_pwm_cycle() case, the period is 64000, then the
target_freq is 8000000 / 64000 = 125Hz and <= 324Hz, so we will
switch the prescaler clock source from 8MHz to 32.768kHz.
Then the target_freq is 32768 / 64000 = 0.512Hz and < 1Hz,
this will return an error code. In order to get the same
target_freq, we always return PWM_FREQ in
pwm_it8xxx2_get_cycles_per_sec().
Signed-off-by: Ruibin Chang <Ruibin.Chang@ite.com.tw>
K_OBJ_MSGQ, K_OBJ_PIPE, and K_OBJ_STACK objects have pointers
to additional memory that can be allocated. The k_obj_alloc()
returns these objects as uninitialized so when they are freed
there are random opportunities for freeing invalid memory
and causing random faults.
Signed-off-by: David Leach <david.leach@nxp.com>
The K_OBJ_MSGQ object is unitialized so when the thread cleanup occurs
after an expected fault for invalid access the test case can randomly
fault again because the cleanup of the thread will sometimes attempt
to free invalid buffer_start pointer in the msgq object.
Fixes#42705
Signed-off-by: David Leach <david.leach@nxp.com>
This solves the following issues:
- Auto-initiation of commands is aborted if one of the issued commands
fails
- The controller return value for a PHY update or DL update is not
made available to the application.
As a result, the host no longer prevents the application from calling
bt_conn_le_data_len_update() and bt_conn_le_phy_update() before the
auto-initiated procedure completes. Now the controller may or may not
accept the additional command issued by the application.
It also simplifies the code:
- We no longer need to keep track of if the auto-phy update
or auto-dl update has completed. If the controller receives
another LE Set PHY while the procedure is pending in the LL, it can
decide if wants to accept another procedure initiation or not.
- We no longer need to auto-initiate auto-initiation of commands in
multiple places
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Logging v2 is utilizing complex preprocessing operations to
prepare message at compile time. Multiple operations are peformed
on log message arguments. However, it is expected that argument
will be evaluated only once (e.g. it can be a call to a function
with side effects). Adding additional layer which creates copies
of user arguments on stack and passes them to further processing.
Updated test for log_msg2 which is using internal macro which
got renamed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logging v2 did not support getting memory usage data. Adding this
support by creating common api for getting current and maximum
usage. Tracking of maximum usage is optional and can be enabled
using CONFIG_LOG_MEM_UTILIZATION.
Updated shell command to use common API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add API to fetch current buffer usage. Add option to track
maximum buffer usage and API to fetch that value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add support for the Keyestudio CAN-BUS shield (KS0411). This shield is
very similar to the DFRobot CAN-BUS shield v2.0.
Rename the MCP2515 devicetree nodes in order not to conflict with
on-chip CAN controllers and switch to specifying the sample point
instead of time quantas.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
CAN1 is connected to an onboard ATA6561 transceiver on the SAM V71
Xplained Ultra board. This changeset adds the required DTS plumbing.
Tested with:
- samples/drivers/can
Signed-off-by: Perry Hung <perry@genrad.io>
The driver enabled extended error code (AT+CMEE=1) during
setup but is missing a handler for the +CME ERROR, fix that.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Waits until the network interface goes down before switching the
GSM_MUX. It uses the NET_MGMT_EVENT to signal a semaphore to
contiue when closed. This allows for the LCP state machine to
properly terminate. When skipping this wait, the second time
connecting, the connection might fail.
Tested on a real modem.
Fixes GSM PPP behavior in combination with: #41802
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Zephyr docs should mention OTA:
- Define Over-the-Air update
- Indicate OTA can be used with MCUboot
- Link examples of the OTA DFU process
Signed-off-by: Mike Szczys <mike@golioth.io>
Carlo Caione