We need to be able to perform the init procedure asynchronously
through a callback. The RX fiber is a good candidate to use for the
callback since it's not active in its normal operation before
drv->open has been called. In order to prepare for a future
bt_disable() API the init API is renamed from bt_init() to
bt_enable(). If a NULL pointer is given as the callback the API
behaves synchronously like the old bt_init().
Change-Id: I4e78fa8f32dcf5477ea05a8db75aca5cdce591fd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds bitmask to be used for validation of LE features
exchange support.
Change-Id: I96a79f5e5c4fef330933480f9dd5ec567cd9523f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Adds LE read remote features command and event types.
Change-Id: I3270142379c6f822f6f4be2e720c9cabb5d3df3e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The slave may request a change to the connection parameters using
the L2CAP LE signaling channel if either the master or the slave
or both do not support the Connection Parameters Request procedure.
Therefore if local controller doesn't support this, the request
can be made for sure.
Change-Id: I23e70793763693e40dab3bfb6a9634816f5b02b2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This is consistent with the rest of the API since the attribute length
can be at most 512 bytes long.
Change-Id: Ia2e60cf8dadcb93d0d091cda5be1b80de98fae94
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Attribute length can be up to 512 bytes long so it needs to be at least
uint16_t, ATT already takes care that the MTU does not exceed 512 bytes.
Change-Id: I6c8dc80a4b63f212420c26c0a24d93939fa510fe
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With this patch advertising state and scanning state are stored as flags.
Change-Id: I5d2dc37972620ee89aaf55d45e294e8be82863d3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_gatt_unsubscribe which can used to unsubscribe to attribute
value notification using CCC handle.
Change-Id: I8a3b1594787a3322834516d0306a84c8ef7792dd
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_subscribe which can used to subscribe to attribute
value notification using CCC handle.
Change-Id: I0983843836b0c2253f750b34b7765dd880cb10a0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
All public APIs shall contain the complete documentation including
@return in case the function return something.
Change-Id: I1f16eaf988ace1a3ac760c59eacd71a6a5912df9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_write which can used to write attribute value.
Change-Id: I45a02e6dbf642ed1bcab8234180f2c48a28e2874
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This function operates on bt_conn so it should be in conn.c and
exported through conn.h. Rename it with the appropriate bt_conn_*
prefix.
Change-Id: Id17c67f0e95cc1afb10aa7742b2d2ce0110ea616
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_disconnect deals with the bt_conn object and should therefore
reside in conn.c and be exported through conn.h. It should also have
the appropriate bt_conn_* prefix.
Change-Id: I75eb648fd9aa8ced9a991d472c319d25f4b772af
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds bt_gatt_read which can used to read attribute values.
Note: Attributes which values are bigger than the MTU need to be read
multiple time until the end since the stack cannot cache any data.
Change-Id: I09c502eeb674a577673182c35a0e1a84519fd3b7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Calling bt_conn_set_auto_conn one can decide if auto connect shall
be used. If so, everytime the connection is lost, passive scanning
will be enabled to listen for connectable advertisements from
remote device and re-establish the connection.
Auto connect can be disabled if one decide to disconnect from
this device using bt_disconnect or call bt_conn_set_auto_conn
with auto_conn flag set to false.
Change-Id: Ic9952e313cb8612ea6c72838be0755805daeffcf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables directly add 16-bit value at the end of operational buffer.
Value is converted to little-endian format before is appended.
Position of buffer's tail is updated during addition.
Usage of bt_buf_add() call enables monitoring available limited room
in the buffer when CONFIG_BLUETOOTH_DEBUG is on.
Change-Id: Id7ac62cd3b11ef03302e94185a7faae747eccb20
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This adds bt_gatt_discover_descriptors which can used to discover all
descriptors in the given range.
Change-Id: Idf93852ef9d8ba3bfce20dc0b95f4e11aa0dc73d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds above function to stop ongoing advertising.
Change-Id: I16b3913524a61e844a81cbe733f2b8e6072ab442
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds bt_gatt_discover_characteristic which can used to discover all
characteristics in the given range.
Change-Id: Ia7ddb93dfdb0f979409e133c902a1cbd9ae9fe71
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
gatt.h API depend on bt_uuid so make use uuid.h is always included.
Change-Id: If9d4e5a668ac4e0b167eda8fe41e8b4810dfe298
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_discover can be used to discover primary GATT service by UUID in
a selected handle range, after it attribute found the function callback
is called so the user can interact the attribute found and decide to
continue to the next or stop.
Change-Id: I37514f00c82ce5520d7a14757a6ff12ee34f0736
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the Command Complete status is read, this status shall be returned.
Change-Id: Ic3fe102c16da4b01d002a2d39952fd401e9f832d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
bt_gatt_exchange_mtu can be used to exchange MTU used by GATT, the MTU
is selected automatically based on the amount of data bt_buf can hold.
Change-Id: Id49a506663d922132e81c0a753a983b93579ffd0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all occurances of /*! to /** to match javadoc
style.
Change-Id: I3a759d34e0e928216f61252682266e64c5b875f8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds HCI routine to cancel creation of outgoing connection.
bt_disconnect is called to cancel connection or disconnect based on current
connection state.
Change-Id: I462a61308a580bb24aa9a6c398eb7e443b995655
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Enables make outgoing connection with error handling.
Free connection objects maintained in polls are assigned to active
connection by result of lookup on the polls based on input
peer LE address.
Updates shell application to reflect above changes in stack.
Change-Id: Ibc71343c0d122cc78c48bac2ff1e50533369b7d2
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Also rename bt_conn_security function to bt_security and
bt_conn_security_t to bt__security_t.
Change-Id: I543c7b97241c4389ef0eb491b6869f93105ae533
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This was same as low security and is not needed. This also match
security levels with LE Mode 1 security level from Core Specification.
Change-Id: Ia82e1f4d94c281d7e7f88f03a16a1e34eb49f710
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This command will be used to enable encryption when acting as master.
Change-Id: Iaaf1d5b98bfcfcf17a5cc7006a6c40d0905011fd
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
This adds bt_conn_security function that can be used to elevate
security on connection. If device is not paired it will trigger
pairing first.
For now only JustWorks pairing is supported so full security level
tracking is not needed as only medium level is supported.
Change-Id: I6d344f55286a79bd989bd18f852a6859dc8ea96a
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Now that bt_conn is public using it directly is much more convenient
and in some cases save a lookup by address.
Change-Id: Ia489948634984fe4f1a430da553f8a2a740fb531
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure the bigger members are always list first in non-packed
struct to minimize the use of padding for alignment by the compiler.
Change-Id: I64419e9b27f4e7d3abb4eeb0ef2a88beda5b22e3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Changing the spelling to comply with the checkpatch tool.
Change-Id: I7f28fd73bfbc89d91e4d7caccffa2c018dcadf6d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
When connected, the peripheral/slave can trigger changing connection parameters.
Handle such request on central/master and if needed update controller settings
regarding the relevant connection parameters.
Change-Id: If3c1d91752f8d3875918bd8bfe923330790f530e
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This function allows to pick connection destination address.
Change-Id: I3e4959eec00905c64de3d8b9ef810b613c2e9f91
Signed-off-by: Szymon Janc <szymon.janc@tieto.com>
Make the documentation style consistent and add documentation to
functions that were missing it.
Change-Id: I1822480a604bb2efcb0dbfc63ae0675ebf4b5987
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Adds user helper functions dealing with formatting bluetooth
address.
Refactors internal helpers using public ones.
Change-Id: If7b9f9a93b2aef3d25df55d6cfae9de05d8830b0
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Enables sending LE discovery results to user app.
Updates central apps to use new scan API.
Change-Id: Id319c96e15554f2eed4cf507cddd114ca74aa8e5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Johan Hedberg