Allow using direct IRQs (which are obligatory when buiding
with `CONFIG_GEN_SW_ISR_TABLE=n`).
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Some deprecated inclusions in max32672.h are causing compilation
warnings, which are interpreted as errors by build tests. Grab relevant
fixes from hal_adi.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Modify the GAP connect to use 30ms. The default parameters
typically ended up with 50ms which is OK in most cases,
but for ISO related test cases, using an ACL interval that
is a multiple of the ISO SDU interval (7.5/10ms) generally
provides better stability. 30ms is the lowest multiple
of both 7.5 and 10ms, and was thus chosen.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These two functions have stood the test of the time and they have
absolutely nothing specific to sign.py
This has the benefit of transitioning away from west's global and
deprecated logging interface
(https://github.com/zephyrproject-rtos/west/issues/149) and this
deprecation is what prompted this commit: see #79240.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Applies the 'unlikely' attribute to various kernel objects that
use z_unpend_first_thread() to optimize for the non-blocking path.
This boosts the thread_metric synchronization benchmark numbers
on the frdm_k64f board by about 10%.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
If there is a carrier (cable plugged in) on device initialisation
there is a race between the interrupt service and the L2 init.
Signed-off-by: Dean Sellers <dsellers@evos.com.au>
Like in all other legacy boards, hw-flow-control should not be
enabled for console UART. With hw-flow-control sample stuck
during printing some initial information and sample appears to
be not working correctly unless com port is opened.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
STM32F1 doesn't have synchronous/asynchronous source clock choice.
The recently added clock check was failing compilation for these series.
This commit removes the check for F1.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The comparator drivers area contains the following incorrect area:
files:
- include/zephyr/dt-bindings/clock/
and contains the following duplicate area:
files:
- include/zephyr/drivers/comparator/
this commit removes them.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Board frdm_mcxc242 does not have UART IP configured.
Add UART configuration and pin control. Set state to disabled,
as it serves as alternative to default LPUART0 or as second
uart only. Add uart to supported features in yaml.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Removes extraneous word in note on net_context struct describing why the
source address is not stored directly in struct.
Signed-off-by: Daniel Mangum <georgedanielmangum@gmail.com>
This commit introduces a new option, OPENTHREAD_CLI_VENDOR_EXTENSION,
in the Zephyr OpenThread module to map the upstream option
OT_CLI_VENDOR_EXTENSION.
OPENTHREAD_CLI_VENDOR_EXTENSION option specifies the path to a CMake
file that defines and links the CLI vendor extension. By setting this
option, it enables the addition of vendor-specific commands to
the OpenThread CLI interface.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Enabling all EAP types for enterprise mode increases
memory usage in both ROM and RAM. Provide config options for each
type to let solutions choose the methods based on their
requirements.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Reduce the valid scaling range for the gain multipliers and dividers to
provide more headroom on int64_t overflows in the calculations. Take
advantage of this headroom to perform all multiplications before
divisions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Change the unit of the sense resistor in the devicetree binding from
micro-ohms to milli-ohms. This is done for three reasons.
Firstly, the maximum value resistor that can currently be represented
is 4.2 kOhms, due to the limitation of devicetree properties to 32 bits.
Secondly, storing the resistance at such a high resolution makes
overflows much more likely when the desired output unit is micro-amps,
not milli-amps.
Finally, micro-ohms, are an unnecessarily precise unit for the purpose
of these calculations, and a resolution that is not realistic to
achieve. The high resistor resolution results in large divisors that
reduce the resolution of outputs. Unlike resistors characterised down to
the micro-ohm, devices wanting to measure micro-amps are actually
realistic.
Signed-off-by: Jordan Yates <jordan@embeint.com>
If the Broadcast ID is initially set to 0x000000,
which is valid, comparison logic on add of an
actual Broadcast ID of 0x000000 fails.
Likewise for SID.
Moving INVALID_BROADCAST_ID define to bap.h
Signed-off-by: Lars Knudsen <LAKD@demant.com>
The event is sent from both WPA supplicant and hostapd, but hostapd
should only be sent when using hostapd to create the AP.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Instead of having one large compile.sh for all audio samples,
it has been split into multiple. This makes it easier to
build and run specific tests (e.g. BAP or CAP), without
having to build all of them.
This also makes it easier to expand later, without
creating one huge compile.sh file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There is nothing like AMD-Xilinx Inc. That's why use full AMD name
instead.
Fixes: 09e2a4e9eb ("drivers: ipm: add zynqmp r5f support")
Co-developed-by: Mubin Sayyed <mubin.sayyed@amd.com>
Signed-off-by: Mubin Sayyed <mubin.sayyed@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Make clear in the include/ header that data frame size
is the same thing as word size for the context of this API.
Also, add some comments to the spi_context to make it easier
for driver writers to understand how to use the functions,
by noting the meaning of the dfs and len parameters to the update
functions. Otherwise it takes some time to understand what they mean.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Two ethernet capabilities were missing. Added them to allow
the 2.5G and 5G strings to appended.
Signed-off-by: Christoph Seitz <christoph.seitz@infineon.com>
The "struct video_driver_api" struct field "get_ctrl" had the wrong type
although this did not have any practical effect as "video_api_set_ctrl_t"
and "video_api_get_ctrl_t" have the same signature.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Update to latest Sphinx RTD Theme version.
Main benefit will be to be able to leverage Sphinx 8.0 since previous
version of the theme was depending on 'sphinx < 8.0'.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add basic support for the phyBOARD-Nash, a SBC based on the phyCORE-i.MX93.
Both CPU types (Cortex-A55, Cortex-M33) are supported.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Currently Zephyr depends on POSIX, which presents a
dependency cycle.
Newlib does not seem to like this dependency cycle so it
requires that we re-declare off_t and ssize_t.
We should really stop using off_t and ssize_t below the
POSIX API line in Zephyr.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Several help prompts for non-user-selectable Kconfig options
included the phrase "select 'y' here", which does not make
any sense in this situation.
Adjust the help sections to use more appropriate language.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark the POSIX_DEVICE_IO Option Group as commplete. This Option
Group is required for PSE51, PSE52, PSE53, PSE54, and most of
the interesting applications involving file descriptors and
sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Move the implementation of zsock_select() to zvfs_select(). This
allows other types of file descriptors to also make use of
select() functionality even when the network subsystem is not
enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Move the implementation of zsock_poll to zvfs_poll. This allows
other types of file descriptors to also make use of poll()
functionality even when the network subsystem is not enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add pread() and pwrite() implementations, which are nearly
identical to read() and write() but differ in that they do not
update the file-descriptor offset and instead read from a
specific file offset.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_DEVICE_IO Option Group requires a number of c89
functions mainly from stdio.h .
Namely,
clearerr(), fclose(), feof(), ferror(), fflush(), fetc(),
fgets(), fprintf(), fputc(), fputs(), fread(), freopen(),
fscanf(), fwrite(), getc(), getchar(), gets(), perror(),
printf(), putc(), putchar(), puts(), scanf(), setbuf(),
setvbuf(), ungetc(), vfprintf(), vfscanf(), vfprintf(), and
vscanf().
Additionally, symbols stdin, stdout, and stderr should be
provided.
These should be provided by any conformant C library
(not by the POSIX API).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Only invoke vtable methods read, write, and close if they are
non-NULL.
The close() vtable method is optional, so that should not return
an error if zvfs_close() is called and that method is
unimplemented.
Otherwise, if zvfs_read() or zvfs_write() are called and the
corresponding vtable method is unimplemented, fail setting
errno to EIO.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add common video interface binding. This binding contains the most
common properties needed to configure an endpoint subnode for data
exchange with other device.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
bindesc.h did not explicitly include device.h. For some build scenarios
this caused compilation warnings, failing the CI.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Marcin Szymczyk