Add risc-v maintainers and update collaborators.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
Signed-off-by: Peter Gielda <pgielda@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This is used by autoPTS project so make sure Szymon is aware of all
changes in tester application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
- Rename to "action" to make its purpose more clear
- Use the _cb suffix to align with naming used for callbacks in other
areas.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Accessing members from pm_device improves code readability, since it
removes dev-> from most accesses.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some includes were already performed by the device(_runtime).h header/s,
others like were not necessary.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit creates a new `zephyr_build_string()` function.
`zephyr_build_string()` provides a common way of constructing a build
string based on board name, board revision, and build type.
Having this as a function facilitate creation of names in a common way
and thus helps to ensure naming consistency, especially if newer info
is later embedded into the build string.
Initially the build string will be used to lookup configuration
fragments and devicetree overlay files.
This function is used by `zephyr_file(CONF_FILES ...)`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Updated the doc to use GNU Arm Embedded which is the correct term
according to the official Arm documentation at the time of this commit.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds description on how to use the Arm Compiler 6 / armclang
toolchain with Zephyr.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Poll the flash status instead of just reading the flash status once. Add
support for controlling the number of SDO retries and the SDO timeouts.
These changes allows for greater control of the CANopen program
download, which is especially useful on noisy or congested CAN networks
and on devices with slower flash access.
Fixes: #39409
Signed-off-by: Klaus H. Sorensen <khso@vestas.com>
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Espressif wpa_supplicant depends on mbedtls. Due to latest
update to 3.0.0, a few updates were needed to be compliant
with api changes.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Don't allow to enable multiple register banks / fast
interrupts if we have only one interrupt priority level.
NOTE: we duplicate some checks by adding dependencies to ARC
Kconfig and adding build-time checks in C code. We do it
intentionally as for some reason we can violate dependencies
in architecture-level Kconfig by adding incorrect default in
SoC-level Kconfig. Such violation happens without any
warnings / errors from the Kconfig.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
LOG2CEIL is defined now for all tolchains in
include/toolchain/common.h
so let's drop it's definition for MWDT toolchain in
include/linker/linker-tool-mwdt.h
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Currently all the *-names and *-cells properties are derived from the
name of the base <name>s property. This is a limitation because:
- It forces the base property name to be plural ending in -s
- It doesn't allow the english exception of plural words ending in -es
With this patch we add one additional property 'specifier-space' that
can be used to explicitly specify the base property name.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Suggested-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
1) Allow use of interrup driven instance.
ROM implementation could be selected via dts compatiable.
2) Use UART rx fifo and timeout interrupt for end of message detection.
Added to decrease interrupts count on data reception
3) Use ESP_LL api.
Signed-off-by: Pavlo Hamov <p.hamov@venstar.com>
Replace the custom float32_value_t LwM2M type with native double, to
facilitate LwM2M API and improve floating point precission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Don't build TF-M in parallel on Windows as it has been reported to
expose dependency issues with the TF-M build system.
These issues will be investigated at a later time.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
RT10xx platforms will fail to build with SPI and Ethernet enabled due to
a pin conflict. Exclude them from the ethernet build test as it enables
SPI and will fail.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
MCUXpresso SDK sets the drive strength of LPUART and LPI2C pins to 4 for
this SOC, versus 6 for most other RT10xx boards. Update the pinmux.c
file for mimxrt1010_evk to reflect this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds SPI support on LPSPI1 to the RT1010. LPSPI1 is available on pins
6, 8, 10, and 12 of J57 on the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit enables the LPSPI1 peripheral on the RT1015 EVK. LPSPI pins
are not populated by default, but headers can be added to J19 on the EVK
to access these signals
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for LPSPI to mimxrt1024_evk. LPSPI1 is exposed on pins
6,8,10, and 12 of J19 of the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI support is available on LPSPI1 and LPSPI3. Both of these require
board modifications to expose headers. LPSPI1 is used for testing,
and requires that the board have solder jumpers R278, R279, R280,
and R281 bridged.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI support is available on LPSPI1 and LPSPI3. Both of these require
board modifications to expose headers. LPSPI1 is used for testing, and
requires that the board have solder jumpers R278, R279, R280, and R281
bridged.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT1050 has multiple LPSPI peripherals. The simplest to access is LPSPI1,
which can be connected by bridging solder jumpers on the board. Enable
this SPI peripheral, and set it as default for SPI tests.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
PR adds testing of subscription of the tree of extended models.
Extended models should share subscription list among them.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
cAVS 1.5 has little RAM, force COMP_SRC_TINY to fix SOF build
failures under Zephyr with XCC.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Create a template for nominating GitHub users for an elevated
permission levels. Update the TSC Project Roles page to reference the
nomination template and add clarity to the GitHub permissions allowed at
each level.
Signed-off-by: Keith Short <keithshort@google.com>
In the case where the aligned memory range is on top of the allocated
memory range, freeing the 0 sized top unused memory will trigger
an assert in the virt_region_free() call since vaddr could be equal
to Z_VIRT_REGION_END_ADDR.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The NET_DEVICE_DT_DEFINE_INSTANCE() macro was passing an invalid
dev_name to Z_NET_DEVICE_INIT_INSTANCE(). Change this parameter to get
device name based on the node_id, matching other macros.
Signed-off-by: Keith Short <keithshort@google.com>
When CLOCK_CONTROL_NRF_FORCE_ALT is enabled then calibration is
performed outside of the driver. In that case certain Kconfig
options where present which were dedicated for case when calibration
is performed by the driver. Side effects of those options lead to
conflicts when CLOCK_CONTROL_NRF_FORCE_ALT was enabled. Fixed
those conflicts by introducing Kconfig option which indicates
whether calibration is performed by the driver or not.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
tracing.osawareness.openocd relies on the CONFIG_THREAD_NAME is
enabled, however we don't enable it in test config.
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Andrei Emeltchenko