Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Fix the data acquisition thread function signatures to avoid a stack
corruption on thread exit.
Fixes#62637
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Limit the number of the copied ssid to WIFI_SSID_MAX_LEN
and avoid a possible one byte overflow.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
LOG_LEVEL > LOG_LEVEL_OFF guards were protecting a couple of function
declarations. These functions were being used without taking this fact
into consideration. These guards are now applied around the stack_stats()
function only.
Signed-off-by: Diogo Correia <diogo.correia@fraunhofer.pt>
The eswifi spi driver sets up spi buffer length as number of frames,
but the length shall be number of bytes. Because eswifi use 16 bit as
frame size, so this turns out reading and writing half of data and
fails to sending any at command request and getting any responds from
eswifi module.
Fix it by setting up length as number of bytes.
Fixes#62056
Signed-off-by: Chien Hung Lin <chienhung.lin.tw@gmail.com>
When Ethernet or Wi-Fi subsystems are enabled, but no driver source
files are provided in the Zephyr source tree (which is the case for
out-of-tree drivers), CMake throws warnings about empty libs, for
example:
No SOURCES given to Zephyr library: drivers__ethernet
No SOURCES given to Zephyr library: drivers__wifi
This commit sets ALLOW_EMPTY property for those libraries, to allow for
seamless out-of-tree drivers integration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix few mismatched CONTAINER_OF, one missing k_work_delayable_from_work
conversion and few cases where the target should be pointing at the
first element explicitly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
when ap mode is enable,
we don't enable iface by `net_eth_carrier_on` before,
this will cause wifi tx error.
this patch fix this issues.
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
When channel set to WIFI_CHANNEL_ANY, ap will not work.
This patch choose channel 0 when channel is WIFI_CHANNEL_ANY.
Signed-off-by: YuLong Yao <feilongphone@gmail.com>
When testing Wi-Fi with MQTT/HTTP/Socket features,
network stacks can be full very fast, causing network issues
and eventual crash.
By analyzing used stacks,increasing the stack size described
in this PR fixes most use cases related above.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Decouple interface and Wi-Fi APIs, Wi-Fi APIs are common independent of
Wi-Fi offload or implemented natively (This is preparation for
introducing Native Wi-Fi).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update ESP AT modem driver to control the network interface dormant
state based on the network connection status, as described in the docs.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add an option that signifies that the ESP modem may be reset at the same
time as the SoC by an external source. When this is the case, we first
wait for an unsolicited "ready" message from the modem, before
attempting to reset the device. This prevents two initialisation
sequences attempting to run at the same time.
We still want to wait for the complete initialisation sequence to
complete before returning in this case.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Don't unconditionally set the carrier to the off state in
`esp_iface_init`, as this is already done in `esp_reset` and the
function may be called after the modem has already completed the init
sequence and called `net_if_carrier_on`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Wait for the init process to finish again, previously removed in
a8e6fc0b83. The original reasoning (deadlock with net interface locking)
no longer applies now that `esp_reset` is called in the device init
function, not in `esp_iface_init` (332a6f084a).
Without this change, if `reset-gpios` or `power-gpios` is set,
`device_is_ready` will return true even if the chip has fallen off the
board, as no communication is validated with the board.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Default scan mode is Active. User can force the scan mode to passive
through Kconfig option or using 'passive' option from shell.
Using either of this option will override regulatory settings and
forces all scan channels to be passive only.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Identify the Wi-Fi capability to the networking stack and also the type
of Wi-Fi (Native vs Offloaded), this helps identifying Wi-Fi interfaces
that can be used by applications.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
MISRA Rule 5.7 requires uniqueness of tag identifiers. Shell is
frequently problematic because many code uses `const struct shell
*shell`. This causes CI noise every time one of these shell files is
edited, so let's update all of them with `const struct shell *sh`
instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is currently not a clear separation between
user configuration and internal context when using the
modem_cmd_handler library. This update adds a clear
separation, placing user configuration in a seperate
struct passed to modem_cmd_handler_init alongside the
internal context modem_cmd_handler_data.
There is also a lack of documentation of the user
configurations, these have been added to the new config
struct.
The new API function modem_cmd_handler_process has been
added to remove the need for the user to directly access
the process member of the internal context. This ensures
that the user is not encouraged to access any internal
context members.
Some whitespace errors exist in the modem_cmd_handler.c
file, these are outside of the scope of this PR. These
can be addressed in a later PR as they are not functional
changes.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
The UART IFACE API currently exposes the context struct
modem_iface_uart_data, expecting the user to fill in some
of the fields, with no documentation specifying which fields
and what they mean.
This API update moves all user configurable values in the context
out into a config struct, modem_iface_uart_config, within which
members are documented.
This prevents the user from interacting directly with the context
making use of the library safer and more readable.
The config structure helps make code readable by using "named args"
in a const struct instead of a long, nameless, parameter list passed
to the modem_iface_uart_init function.
The new API function modem_iface_uart_rx_wait is added to prevent the
user from having to interact with the rx sem in the context directly.
The context can now be safely interated with without direct access to
any of its members.
Pointers to the ring buffer params in the context have been moved to
config struct, as these are only useful during initialization of the
context.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
There is no event reporting WiFi disconnect, create a polling
work for this and report the event.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
It has been observed that sockets can be in bad state after
boot. Be sure to correctly reset local port and any 'server'
mode before configuring client mode.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
- We should wait indefinitely if msecs is -1 (FOREVER).
- We can directly return if data is already available in FIFO.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
There is no listen or accept for UDP, we need to enable the UDP
server mode (P5=1) as soon as bind is complete.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move esp_wifi_internal_reg_rxcb() after esp_wifi_init(), so that
wifi_connect() is successful.
Fixes: 690f65dbd9 ("drivers: wifi: esp32: fix possible interface null
pointer")
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Adds dummy link layer for offloaded ifaces, allowing
ifaces to directly receive l2_enable calls
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
esp32_wifi_dev_init() currently starts Wi-Fi stack before
the interface is properly configured, which happens in function
esp32_wifi_init(). This can trigger a ESP32_WIFI_EVENT_STA_START event
before interface initialization, causing a crash.
Moving esp_wifi_start() to esp32_wifi_init() will guarantee that
this won't happen.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This allows to fetch information about currently connected WiFi network,
e.g. with WiFi mgmt shell commands:
uart:~$ wifi status
Status: successful
==================
State: COMPLETED
Interface Mode: STATION
Link Mode: UNKNOWN
SSID: Tp-Link
BSSID: xx:xx:xx:xx:xx:xx
Band: 2.4GHz
Channel: 13
Security: UNKNOWN
MFP: UNKNOWN
RSSI: -39
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
For development and debugging purposes it is good to know what is the
version of ESP-AT firmware used on modem. This can be fetched with AT+GMR
command.
Fetch this information during driver init and log all available version
strings, so they look like that:
wifi_esp_at: AT version: 2.1.0.0(883f7f2 - Jul 24 2020 11:50:07)
wifi_esp_at: SDK version: v4.0.1-193-ge7ac221
wifi_esp_at: compile time: (0ad6331):Jul 28 2020 02:47:21
wifi_esp_at: Bin version: 2.1.0(WROOM-32)
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The `fcntl.h` header has never been a part of ISO C so move it to
`include/zephyr/posix`.
To ensure a smooth migration, a header was left in
`lib/libc/minimal/include` that prints a deprecation warning.
Users should either include `<zephyr/posix/fcntl.h>` or switch to
`CONFIG_POSIX_API=y`.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Previously, a call to set the net_context state was added here to
accommodate a new KConfig scenario that permitted disabling offload
sockets. This code path is used by both local and offloaded sockets.
While it is necessary to update the state of the net_context for a
locally managed socket, setting the net_context for an offloaded socket
is an error, as the net_context is invalid (in fact, it points to a
hard-coded dummy socket), as observed in #52346 and #38544.
A prior commit (a9ac0a88) attempting to remedy the offload socket
scenario removed this line, which resulted in problems for the local
socket scenario. The socket never got updated to the connected state,
and thus was unusable.
Adding this guard allows the eswifi socket to set the socket net_context
only if the socket is NOT offloaded.
Signed-off-by: Brian Dunlay <brian@nubix.io>
`spi_is_ready` function is being deprecated in favor of
`spi_is_ready_dt` so let's replace the old usage in the tree.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Do not set wifi optimizations by default in order
to free up IRAM room region. In case higher throutput
is necessary, one can enable this flags to optmize it.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This change fixes a regression from commit 1cbc0acd.
Socket offload uses a dummy socket context, and setting
the socket state in this dummy context is invalid.
Fixes#52317
Signed-off-by: Brian Dunlay <brian@nubix.io>
In order to allow proper softAP mode, wifi
libraries and wpa supplicant requires this kconfig
to be enable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Align Ethernet/Wi-Fi drivers/L2 with interface state handling update.
For drivers, that did not support carrier detection, no changes are
needed.
Driver that did support carrier detection, are updated to set the
carrier state to OFF by default, instead of setting the
NET_IF_NO_AUTO_START flag. This allows to postopne the actual
NET_EVENT_IF_UP notification until driver detects that carrier is ready.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Nazar Palamar