Provide PWM driver for STM32 series F1/F4/L4.
Driver is ported on STM32Cube HAL and should support other STM32
series with minor updates.
Configuration is done so that PWM sample driver could be run on
all nucleo boards supporting PWM driver.
Change-Id: I6522a565451085df932e0eefd8404268380b5bfe
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add the initial SoC support for the STM32L4XX family. The code was
tested on STM32L476RG, but should work on any STM32L4XX currently
available.
This implementation was inspired by the stm32f1x implementation.
Change-Id: Id6670bce0c423617284e8467a9c461531f948e0f
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This new README provides guidelines on STM32Cube introduction
into Zephyr.
Change-Id: I06b22852495dbe7e7f23e88be060fe23e8bd18b5
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32Cube based implementation allows single driver file for
all stm32 based SoCs.
By maximizing code reuse, use of STM32Cube eases new SoCs
porting into Zephyr and provides better maintanability and
maturity.
Change-Id: Ief4b723add3dfc8b2a839683559c5a4c5d5eb837
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The Real Time Terminal functionality of the Segger J-Link
debug probe and software suite allows applications to write
to a certain RAM area that is read in real-time by the
debugger. This is specially useful when a UART is not
available to provide a console.
Origin: Segger J-Link 6.10m
URL: https://www.segger.com/downloads/jlink
Maintained-by: External
Change-Id: I47f5e2d5172797004a3f34ea2f002cd781a22cc8
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using
mbedTLS, and native IP stack
Jira: ZEP-900
Jira: ZEP-943
Change-Id: Ica17b047aab11b989d3e8c8f6ac1b79e3041053a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This commit fixes the issue reported by Coverity: an array compared
against NULL is always false.
Coverity-CID: 143715
Coverity-CID: 143730
Change-Id: Ie3c87f892c2b2a337981125e2a92c37c579d4b38
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes the issue reported by Coverity: an array compared
against NULL is always false.
Coverity-CID: 143687
Coverity-CID: 143737
Coverity-CID: 143740
Change-Id: Id94a144c47b3377876695e86da8c0c33a989ec99
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes a bug found in CTR PRNG reseed function to correctly
use the seed material.
See: https://github.com/01org/tinycrypt
Commit: 601f6a26ab4505ac82a2fb13ae4757c2b8d3eba8
Change-Id: I01216484bd1ee980b0e2da7fdc752a952f217ef0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The way the build system works, the Makefiles under ext/hal/* are being
included unconditionally, so anything they add to the build flags needs
to be protected by the correct configuration value.
Change-Id: I238e04cd836dd9e4c5d83040822039c68abb6b17
Signed-off-by: Iván Briano <ivan.briano@intel.com>
tests: power_states app updated to support SoCWatch collection
Add CONFIG_SOC_WATCH option for enabling the SoCWatch
QMSI driver and associated instrumentation hooks.
Bug fix for soc_watch.c to use local irq_lock/unlock
This will be put into QMSI as well.
JIRA: ZEP-1121
Change-Id: I0514324e81ca02c1d01ffc2d6cf4d31aee491544
Signed-off-by: Jon Moeller <jon.moeller@intel.com>
Change-Id: I5c2de9d5814644855ed4a691fa1712ebd294ca64
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Get stm32l0xx support ready in build system.
Provide minimal file inclusion to support stm32l0 based board
port.
Change-Id: Ieb572389955e9e79a6100a6b1df35d9d08322789
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With this commit we provide header and HAL/LL files for all STM32L0
SoCs.
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubel0.html
Purpose: Introduction of STM32L0xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32L0xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32L0xx, contains stm32l0xx
socs header files
Change-Id: Ibb8ea2e059b5d4f63848be269765d803f842cc2f
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Get stm32f2xx support ready in build system.
Provide minimal file inclusion to support stm32f2 based board
port.
Change-Id: Ice1231709e778e00a51a395decb3447fc58c0bbf
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With this commit we provide header and HAL/LL files for all STM32F2
SoCs.
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef2.html
Purpose: Introduction of STM32F2xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F2xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F2xx, contains stm32f2xx
socs header files
Change-Id: I78a4716d495ce3f3038a442e19a0403f0f00506c
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Get stm32f0xx support ready in build system.
Provide minimal file inclusion to support stm32f0 based board
port.
Change-Id: I9ce62e34fa77b14f34dd0a4fa8d6be344e67b4f8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With this commit we provide header and HAL/LL files for all STM32F0
SoCs.
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef0.html
Purpose: Introduction of STM32F0xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F0xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F0xx, contains stm32f0xx
socs header files.
Change-Id: Ic9c1ef904541abb927f061cc0284d8a52ef63dc4
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Get stm32f7xx support ready in build system.
Provide minimal file inclusion to support stm32f7 based board
port.
Change-Id: Idf949ef4a627bbd82e7bf95a9ae1d3d073654115
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With this commit we provide header and HAL/LL files for all STM32F7
SoCs.
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef7.html
Purpose: Introduction of STM32F7xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F7xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F7xx, contains stm32f7xx
socs header files
Change-Id: I7e5b2cdc5b7fe6d9d107ceb74674b910f4a6c0ab
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The STM32MICRO files for STM32L4xx were dropped in an earlier commit,
but we cannot make any use of them yet because the Kconfig options
and Makefile support is not there yet. This commit adds the ability
for code to use stm32cube from the stm32l4xx code.
Change-Id: I58e85e12e4b4648dc9a203f70703bd54675c3d28
Signed-off-by: Fabien Parent <fparent@baylibre.com>
With this commit we provide header and HAL/LL files for all STM32F3
SoCs (V1.6.0).
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK.
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef3.html
Purpose: Introduction of STM32F3xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F3xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F3xx, contains stm32f3xx
socs header files
Change-Id: I542bec71130bcfc7b720c546b5671e4af4baf2e3
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
This patch removes "FAT" from files names, config names and
symbol names so as to avoid confusion, when other modules use
them in a more generic way.
Also flash_disk_access.c and ram_disk_access.c now exports generic
disk_access symbols as defined in include/disk_access.h rather
than FAT specific ones in fs/fat_diskio.h. Thus modules like
USB which need to use disk_access interface is not dependent
on symbols from ELMChan FAT module. Also fat_diskio.h
is removed.
Further the shim between ELM chan and Zephyr is modified as
per these changes.
Change-Id: Ifd80f14a629e467ee9c7a9aaff8a4896eed11982
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Import the STM32CUBE files that will be used for the support
of the STM32L4xx series.
The files were taken from stm32cube_fw_l4_v152.zip.
Origin: STM32CubeMX
URL: http://www.st.com/en/development-tools/stm32cubemx.html?icmp=stm32cubemx_pron_pr-stm32cubef2_apr2014&sc=stm32cube-pr2
Version: v152
Purpose: Introduction of STM32L4xx SoC definitions
Maintained-by: External
Change-Id: Ib33a86aa35168827ff2d47f0793554fe35945762
Signed-off-by: Fabien Parent <fparent@baylibre.com>
This KSDK flash shim driver supports the device in the FRDM K64F
platform (enabled with this commit).
WARNING: the driver disables the system interrupts for potentially
long periods of time. This is required to avoid Read-While-Write
issues since most platforms run in XIP mode.
For more detailed information see the link below:
http://cache.freescale.com/files/32bit/doc/app_note/AN4695.pdf
Change-Id: I70f8d09080251033ce2f45be0c2eb95c19fded08
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
After QMSI 1.3.1 release, qm_dma is no longer a hard dependency for
qm_i2c. Fix our build system to reflect that change.
Change-Id: I3646bc519721a5aa18e8db5d2497d7a2550241ca
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Update to QMSI 1.3.1 release.
The only build fix needed was due to the split of the I2C ISR on
qm_isr.h .
Change-Id: Ide7a1537572c72981ec3283dc5cf0d543d9ac7d1
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Enable building CC3200 SDK driver peripheral library files in Zephyr.
The SDK provides convenience functions to access CC3200 hardware
peripherals, and header files with register definitions.
Jira: ZEP-1109
Change-Id: I89f1485b9f35320a253ae211a27168bb2288c8b7
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The CC3200 SDK provides a peripheral driver library and hardware
register access header files for the Texas Instruments SimpleLink
CC3200 SoC.
Origin: Texas Instruments CC3200 SDK v1.2.0
URL: http://www.ti.com/tool/cc3200sdk
Purpose: Provide driver library and HAL for TI CC3200 SoC
Maintained-by: External
Jira: ZEP-1109
Change-Id: Ieb7f833adfbb7bc04842cfd0cd95127c48ab9eb1
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Create HAS_CUBE config flag to control activation of STM32Cube support.
Generate fitting compilation options for STM32Cube in
/ext/hal/stm32cube/Makefile soc.h is updated to include minimum include
files from ext/hal/stm23cube
Change-Id: If58ce0a4fdb7fbf5f171dfe5f1f8eb75126a8313
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Following previous commits, updating build system files in order
to support stm32cube on stm32f4xx series.
Change-Id: Id74779a7cf15f3fdce372bf8710c3f7c4fff4773
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Following previous commits, adding build system files with
minimum files inclusion to initiate stm32cube based porting
in zephyr
Change-Id: I02be8161a8c63cf05cc6b2de2f3fb0c0a4ef490f
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With this commit we provide header and HAL/LL files for all STM32F4
SoCs (V1.13.0).
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK.
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef4.html
Purpose: Introduction of STM32F4xx STM32Cube definitions and
Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F4xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F4xx, contains stm32f4xx
socs header files
Change-Id: I34ad6b711273ea27ceb2a07073499b153f37e044
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
With this commit we provide header and HAL/LL files for all STM32F1
SoCs (V1.4.0).
Using STM32Cube provides generic access to all families, maximizes
code reuse across different STM32 families and helps taking benefit
of a mature SDK
Origin: STM32Cube
URL: http://www.st.com/content/st_com/en/products/embedded-software/mcus-embedded-software/stm32-embedded-software/stm32cube-embedded-software/stm32cubef1.html
Purpose: Introduction of STM32F1xx STM32Cube definitions
and Abstraction Layers
Maintained-by: External
Original STM32Cube tree structure has been modified to a minimum
structure for a better fit into Zephyr. hal is split into 2 parts:
-driver: initially Drivers/STM32F1xx_HAL_Driver, contains HAL and LL
-soc: initially Drivers/CMSIS/Device/ST/STM32F1xx, contains stm32f1xx
socs header files
Change-Id: Ibfe08cea5f7fee54417ec9ecb6e9b4f33c04ec95
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enabling the power management features in QMSI requires passing the
ENABLE_RESTORE_CONTEXT definition to both the build of QMSI and to
every inclussion of a QMSI header.
Add the necessary -D flag to the Zephyr build when
CONFIG_SYS_POWER_DEEP_SLEEP is defined.
Jira: ZEP-995
Change-Id: If6ce5985a372a499c63dbbbb9efed49af5fc75b2
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Building QMSI to be used inside Zephyr requires that the build flag
ENABLE_EXTERNAL_ISR_HANDLING be defined, so QMSI knows not to treat
IRQs by itself. However, setting that in subdir-ccflags in the QMSI
directory makes the flag available only during the QMSI build.
Put the definition in KBUILD_CPPFLAGS so it's also available to users
of QMSI, regardless of whether it's the internal build or used as an
external library, and so that definitions protected by this flag match
between what's built and what is seen through header inclusion.
Jira: ZEP-1030
Change-Id: Ifd4af2ab4bdf741269cdd732b48e00e5656e65fe
Signed-off-by: Iván Briano <ivan.briano@intel.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_SCSS_INT is renamed to QM_INTERRUPT_ROUTER;
- every member of QM_INTERRUPT_ROUTER was renamed as well;
- QM_IRQ_* renamed too, mostly added _INT at the end;
- some isr functions were renamed to keep their names consistent;
- build for x86 needs to define QM_LAKEMONT, as QM_SENSOR was for ARC.
Change-Id: I459029ca0d373f6c831e2bb8ebd52402a55994d1
Signed-off-by: Iván Briano <ivan.briano@intel.com>
The various other KSDK shim drivers follow the name pattern
<DEVICE>_KSDK, renaming the RANDOM driver to follow the pattern.
Change-Id: I89409083f94c0990129726e70a964b02e0dc2802
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Update the QMSI drop we maintain in Zephyr, and fix the build where
needed:
- QM_USB_BASE is renamed to QM_USB_0_BASE;
- parameter int_en from qm_uart cfg struct was removed;
- driver's folder now has a new structure, fix makefiles accordingly;
- QM_WDT_MODE and related renamed to QM_WDT_CR_RMOD;
- QM_SCSS_AON renamed to QM_AONC.
Change-Id: Iffe9c66b7a3f2fe64418326e20ff0894149b3044
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Add ksdk components necessary to build a network driver on k64f to the
build process.
Origin: Original
Change-Id: I777ab2594b4c443d634264625c39c6c875c34d9f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Erwan Gouriou