The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Add a hidden Kconfig option indicating that a given SoC is equipped
with the IEEE 802.15.4 capable radio so that the corresponding driver
configuration can depend on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Because NXP MPU's regions are dynamically enabled/disabled, USB
device's access maybe restricted when switching out of a task.
Background DMA transfers to/from RAM may happen during MPU region
reconfiguration or core idling.
Enabled USB (Kinetis MPU Master 4) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The SoC clock init code for USB was using a deprecated DTS define.
Switch to using the non-deprecated form.
Fixes: #17772
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a kernel timer driver for the MEC1501 32KHz RTOS timer.
This timer is a count down 32-bit counter clocked at a fixed
32768 Hz. It features one-shot, auto-reload, and halt count down
while the Cortex-M is halted by JTAG/SWD. This driver is based
on the new Intel local APIC driver. The driver was tuned for
accuracy at small sleep values. Added a work-around for RTOS
timer restart issue. RTOS timer driver requires board ticks per
second to be 32768 if tickless operation is configured.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
The uart_stellaris driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_qmsi driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_msp432p4xx driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The uart_pl011 driver used system clock frequency
as a base for baudrate calculation. This commit corrects
that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The spi_dw driver used system clock frequency
as a base for SPI bus frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The log_backend_swo used system clock frequency
as a base for SWO clock calculation. This commit
corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used timer clock frequency
as a system clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The SoC initialization code used system clock frequency
as a CPU clock frequency. This commit corrects that by
obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The i2c_cc32xx driver used system clock frequency
as a base for I2C clock frequency calculation.
This commit corrects that by obtaining the needed value from DTS.
Please note, that for I2C devices the clock-frequency property
specifies SCK frequency, instead of frequency of the clock driving
peripheral. To solve that problem, a new property was added.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Have the SoC dtsi files for microchip mark the devices (uart & i2c) as
disabled by default and let the board dts files enable which one's they
need/use (which is what's happening already).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Because NXP MPU's regions are dynamically enabled/disabled, ENET
device's access maybe restricted when switching out of a task.
Background DMA transfers from RAM to MAC/PHY may happen during MPU
region reconfiguration or core idling.
Enabled ENET (Kinetis MPU Master 3) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This patch populates "clocks" property in stm32 usb nodes
for clock related usb configuration code of each dtsi files
Signed-off-by: Francois Ramu <francois.ramu@st.com>
uint8_array values are now generated as structure initializers. Update
the code accordingly. The implementation assumes that existing
devicetree source does not provide the correct OUI so preserves the
in-driver override of the value provided by devicetree and its setting
for random/unique addresses.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Implementation of pinmux of usdhc depends on board design.
Usdhc driver could change pinmux according to SD mode, SoC
should provide API for this. Board pinmux should register
its pinmux function to SoC.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Add flash support for STM32G0X SoC series.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This patch adds support for the STM32G071xx
from STMicroelectronics.
Signed-off-by: Philippe Retornaz <philippe@shapescale.com>
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Protect gpio_configure function in dual core context.
This operation is not needed for other fuctions of the api:
* init
* read
* write
Protecting gpio_configure also protects access to
interrupt_controller IP.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for C-M4 core on STM32H7 series.
It is enabled in Dual core context with 2 alternatives boot methods:
* Boot CM4 CM7: Both core boot at reset, then CM4 enters Stop mode.
CM7 performs system configuration then finally wakes up CM4
* Boot CM7, CM4 Gated: Only CM7 boots at reset. Once done with
system configuration it triggers (requires option byte update)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Provide basic clock control driver for STM32H7.
Bus clock activation is done through CM7 and CM4 common registers
so we don't have to care to the CPU Id before accessing.
Accesses are not protected for now. Only possible configuration
is system clock source set to HSE driven PLL.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
As with the STM32 boards, these had an existing default for tick rate
that is now lower than the 10 kHz default. They're SysTick devices
that can handle the higher rate just fine. Use that.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The nRF timer runs at only 32 kHz, so there's little reason to try to
divide it to get a synthesized tick rate. Just use the raw clock as
the tick rate, which provides maximal precision and very
singnificantly simplifies the generated code for the ISR.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
UART related defines in STM32F7 files where filled with
references to USART.
Instances 4, 5, 7 and 8 of SoC serial port are actually UARTs.
So rename define's accordingly. Otherwise it couldn't build.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is 32-bit specific, so it is moved into the ia32/ directory
and references to it are updated accordingly.
Also, SP_ARG* definitions are no longer used, so they are removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The IPC peripheral is missing from the list of
supported HW for nRF9160, so this commit adds
that.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The AN521 is a Soft Macro Model implementation of the SSE-200 subsystem
with SIE-200 and CMSDK components targeting the MPS2+ board. The
SSE-200 subsystem implements two Cortex-M33 cores.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ipm.h to drivers/ipm.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move power.h to power/power.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move tracing.h to debug/tracing.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The libc hooks for Newlib requires CONFIG_SRAM_SIZE and
the symbol "_end" at the end of memory. This is in preparation
for enabling Newlib for x86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
* when -mcpu is given, e.g. -mcpu=em4_dmips,-mnorm,-mdiv_em
etc. are already given, no need to duplicate
* use zephyr_compiler_options to replace zephyr_cc_option
zephyr_cc_option will do compile option check first then add
the checked options into option list. It's too strict that makes
options like -mfpu, -mmpy-option cannot be added.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed Quark D2000 SoC files and first-order related DT bindings.
A few config options have been moved from the CONFIG_* space to
the DT_* space, as they were defined in the D2000 Kconfig files
and "leaked" into the other Quark trees.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Enable the MCUX SCG clock controller driver by default for the NXP
Kinetis KE1xF SoC series. Move the generic CLKOUT configuration from
SoC to the clock controller driver.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Allow individual specification of the time quanta used for the CAN bus
propagation segment and phase segment 1.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Definition of obsolete FLASH_PAGE_SIZE Kconfig symbol was
remaining in STM32F3 soc files.
Clean these.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
stm32mp1 was adding a STM32 specific Core selection Kconfig
symbol while zephyr generic CPU_CORTEX_M4 could be used for the
same purpose.
Remove STM32 specific symbol and use generic one.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Sample was not compiling for nordic boards because RTC_0
instance was not enabled by default and RTC_0 device is using
different DT define.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add dts fixup definitions for low power sram base address and size
- DT_LP_SRAM_BASE
- DT_LP_SRAM_SIZE
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
This commit adds counter driver based on RTCC module for SiLabs Gecko
SoCs.
Tested with SLWSTK6061A / BRD4250B wireless starter kit.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add board support (and documentation) for the Intel Gordon Peak
Module Reference Board, a dev board based on the Apollo Lake SoC.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These events aren't errors at all, but rather part of normal operation.
They shouldn't trigger error messages, especially given that the console
gets absolutely flooded with them if power management is activated.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
1. Add flash partitions.
2. Add macro DT_START_UP_ENTRY_OFFSET. The entry of the RV32M1 is
not the start of the vector table. Add the macro to inform the
entry offset.
3. Update linker file to support MCUboot
a. For normal cases (CONFIG_BOOTLOADER_MCUBOOT is cleared), the
vector table is located last 256bytes of the flash.
b. If CONFIG_BOOTLOADER_MCUBOOT is set, the vector table is located
after the image header of MCUboot.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
stm32wb55rg is a dual core SoC (M4/M0) with a radio/protocol stack
running on M0 core. M0 FW starts at flash address 0x80CB000.
So flash size available to zephyr is 812K instead of 1M.
Configure package size to reflect this (flash size is now 812K)
and update MPU setting to exclude M0 FW. From MPU point of view,
we set flash size to 512K since we should chose a size being a power
of 2.
If we consider there will be 2 images partitions in a FOTA scheme,
512 K is beyond image-0 and hence is sufficient to cover application
image.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32WB HCI driver requires definition of 2 RAM regions to support
use of 3 shared memory sections: MAPPING_TABLE, MB_MEM1 and MB_MEM2.
In linker.ld, under conditions of HCI driver to be enabled,
define SRAM1 and SRAM2 based on input defined in stm32wb linker.
Then define the 3 sections MAPPING_TABLE, MB_MEM1 and MB_MEM
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The Apollo Lake SoC no longer uses the legacy PCI driver, so remove
references and supporting code.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
While enabling specific I2C ports does indeed belong at the board
level Kconfig, the selection of driver (I2C_DW) is an SoC-level
choice, so it is moved accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Which UARTs are broken out from the SoC on a particular board is
board-specific; don't enable UARTs blindly in the SoC Kconfig.
Also, the default UART options are specified in the driver Kconfig, so
the same defaults specified in the SoC Kconfig are redundant. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The UART references in dts_fixup.h are actually SoC-specific, not
board-specific, so they are moved. Since this leaves the board fixups
empty, the file is removed.
The SoC fixups are expanded to include the additional two ports that
are present on some revisions of the Apollo Lake.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Several customer configuration (CCFG) settings are useful for
development and deployment. This commit adds support for setting CCFG
values via Kconfig. It follows TI's recommendation of setting CCFG
values and then including the TI provided CCFG. This commit includes
support for enabling the ROM bootloader and additional settings can be
added as needed.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The HiFive1 and HiFive1 Rev B share the same clock initialization
code, so put it in soc/riscv32/riscv-privilege/sifive-freedom.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
The HiFive1 Rev B adds the following features to the
original HiFive1:
- A second UART peripheral 'uart_1'
- A hardware I2C peripheral 'i2c_0'
- Segger J-Link OB
- An ESP32-WROOM attached to the 'spi_1' peripheral bus
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
soc_register.h is available in most of stm32 series.
It is sometime empty or contains includes to flash_registers.h,
which is included directly with direct reference in flash driver.
soc_register.h is also included in stm32 clock drivers, but this
driver do not use direct reference to any register anymore.
Clean up these files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
tests/drivers/i2c/i2c_api wants to have CONFIG_I2C_0_NAME defined.
Add it to dts_fixup.h as was done for Watchdog and & timer.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
This adds support for the basic timer counter (TC) found on SAM0
series parts. This driver only supports running the counter
in 32 bit wide mode. Since this mode explicitly slaves the odd
counters to the even ones, only instances of the even ones are
defined.
Tested with tests/drivers/counter/counter_basic_api on SAMD21.
Signed-off-by: Derek Hageman <hageman@inthat.cloud>
Define pinmux base addresses from gpio bases. Pinmux
and gpio functionality are located in the same PCR register
for each pin.
Introduce pinmux Kconfig switches for the SOC.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
This commit enforces platform-specific initialization
for nRF SoC family. The specific platform initialization
hook is invoked directly after reset and calls the nRFx
SystemInit() function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
If the QMSI is not configured in (in the west manifest) we get kconfig
whitelisting errors because the type is declared within the module
itself.
Change default to def_bool to set the type.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for the Low Power Inter-Integrated Circuit (LPI2C)
controllers found in the NXP Kinetis KE1xF SoC series.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add option for enabling the Code Cache present on the NXP Kinetis
KE1xF SoC series and enable it by default.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The Apollo Lake devicetree is augmented with its 8 I2C interfaces.
The default number of dynamic IRQ stubs is increased to deal with
these new interfaces having IRQ vector detection at runtime.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The legacy PCI support in the DesignWare I2C driver is replaced with
the new PCIe support. The Intel Quark X1000 SoC and the galileo board
configurations are updated accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This needs to be pushed down to the SoC level, as it's an Apollo Lake
feature, not a feature of the UpSquared. Remove the Apollo Lake
references to the PCI devices because these will not be used when I2C
support is restored.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Unlike Cortex-M3 and Cortex-M4, in Cortex-M7 the number of
MPU regions may vary based on the implementation. This commit
adds a DTS node for the ARM MPU peripheral in the device tree
of Cortex-M7 SoCs and updates the fixup files, so we may extract
the number of MPU regions at build time. SoCs:
- nxp_rt
- same70
- stm32f7
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Wayne Ren