Update the new API to use K_USER as the flags for both
CONFIG_USERSPACE and CONFIG_TEST_USERSPACE. Also, fix the linker
script to properly include the suites, tests, and rules.
Fixes#44108
Signed-off-by: Yuval Peress <peress@google.com>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There are boards without CMOS RTC, where blind accesses to
the RTC registers will freeze the system. So make the test
works with these boards if CONFIG_COUNTER_CMOS=n.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
This adds a filter to only tests platforms that has
CONFIG_X86_PC_COMPATIBLE enabled. ACPI, multiboot and
CMOS RTC are usually all present on PC compatible and
not embedded ones. So limit the scope here.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_text_start and _image_text_end sometimes includes
linker/kobject-text.ld. This mean there must be both the regular
__text_start and __text_end symbols for the pure text section, as well
as <group>_start and <group>_end symbols.
The symbols describing the text region which covers more than just the
text section itself will thus be changed to:
_image_text_start -> __text_region_start
_image_text_end -> __text_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Cleanup and preparation commit for linker script generator.
Zephyr linker scripts provides start and end symbols for each larger
areas in the linker script.
The symbols _image_rom_start and _image_rom_end corresponds to the group
ROMABLE_REGION defined in the ld linker scripts.
The symbols _image_rodata_start and _image_rodata_end is not placed as
independent group but covers common-rom.ld, thread-local-storage.ld,
kobject-rom.ld and snippets-rodata.ld.
This commit align those names and prepares for generation of groups in
linker scripts.
The symbols describing the ROMABLE_REGION will be renamed to:
_image_rom_start -> __rom_region_start
_image_rom_end -> __rom_region_end
The rodata will also use the group symbol notation as:
_image_rodata_start -> __rodata_region_start
_image_rodata_end -> __rodata_region_end
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When demand paging is enabled and not all generic sections are
in physical memory at boot, only tests the permission up to the end
of the pinned section.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When loaded via EFI, we obviously don't have a multiboot info pointer
available (we might have an EFI system table, but zefi doesn't pass
that through yet). Don't try to parse the "whatever garbage was in
%rbp" as a multiboot table.
The configuration is a little clumsy, as strictly our EFI kconfig just
says we're "building for" EFI but not that we'll boot that way. And
tests like arch/x86/info are trying to set CONFIG_MULTIBOOT=n
unconditionally, when it really should be something they detect from
devicetree or wherever.
Fixes#33545
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This function always returns the same value for a given thread.
Add the const attribute to it so the compiler won't call it over and
over needlessly each time _current is referenced, making for far more
efficient code.
The __attribute_const__ symbol is used to mimic the Linux equivalent.
We want to make it clear that this is distinct from the const keyword.
Fix the test_x86_cpu_scrubs_regs where the compiler wasn't told that a
bunch of registers are being clobbered as highlighted by this change.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
All RAM may not be mapped. Check the mapping for the main kernel
image and the locore if it exists.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All RAM may not be mapped. Check the mapping for the main kernel
image and the locore if it exists.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
For a while now, we've had two APIC drivers. The older was preserved
initially as the new (much smaller, "new style") code didn't have
support for Quark interrupt handling. But that's long dead now. Just
remove it.
Note that this migrates the one board using this driver (acrn) to
CONFIG_APIC_TIMER instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add the new x86 board to the x86/info test list, and exclude it from
the cmsis_rtos_v2 test (something that seems to be needed for all 64
bit x86 architectures).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Show the page table layout for a user thread. This
may be somewhat different from a supervisor thread
especially if KPTI is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We provide an option for low-memory systems to use a single set
of page tables for all threads. This is only supported if
KPTI and SMP are disabled. This configuration saves a considerable
amount of RAM, especially if multiple memory domains are used,
at a cost of context switching overhead.
Some caching techniques are used to reduce the amount of context
switch updates; the page tables aren't updated if switching to
a supervisor thread, and the page table configuration of the last
user thread switched in is cached.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If KPTI is not enabled, then the US bit will be set for all
the default memory partitions in the _app_smem section.
The error printed when a mismatch occurs now shows the
expected flags.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No need to mix super short version of names with other structures
having full name. Let's follow a more relevant naming where each and
every attribute name is self-documenting then. (such as s/id/apic_id
etc...)
Also make CONFIG_ACPI usable through IS_ENABLED by enclosing exposed
functions with ifdef CONFIG_ACPI.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For boards with (relatively) large memory, the test which dumps
page tables takes a long time to finish. The default timeout of
sanitycheck is not enough for those boards. UP Squared board is
such a board. So limits to pagetable dumping to boards with
less than 32MB.
Fixes#28548
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To improve Zephyr security, I decided to create a test
to check upon exit of a system call back to the calling thread,
the kernel scrubs CPU registers for sensitive data.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
We no longer plan to support a split address space with
the kernel in high memory and per-process address spaces.
Because of this, we can simplify some things. System RAM
is now always identity mapped at boot.
We no longer require any virtual-to-physical translation
for page tables, and can remove the dual-mapping logic
from the page table generation script since we won't need
to transition the instruction point off of physical
addresses.
CONFIG_KERNEL_VM_BASE and CONFIG_KERNEL_VM_LIMIT
have been removed. The kernel's address space always
starts at CONFIG_SRAM_BASE_ADDRESS, of a fixed size
specified by CONFIG_KERNEL_VM_SIZE.
Driver MMIOs and other uses of k_mem_map() are still
virtually mapped, and the later introduction of demand
paging will result in only a subset of system RAM being
a fixed identity mapping instead of all of it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In order to be possible to debug usermode threads need to be able
issue breakpoint and debug exceptions. To do this it is necessary to
set DPL bits to, at least, the same CPL level.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
For the moment, we validate the flags on all RAM pages,
ensure that NULL is never mapped, and show that dumping
page tables doesn't crash.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test covers private interfaces that don't exist any more.
This will be replaced by tests of arch_mem_map() that are not
x86-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test is against infrastructure that no longer exists.
It will be replaced by generic tests for the mapping APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enjia Mai