Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's found that in nsim_hs_smp, sometimes the cpu
doesn't response inter-core interrupt after executing sleep
instruction.
It may be a bug of nsim, but needs more time to
investigate the root of this issue.
This commit is a workround for this, as nsim is just an
instruction simulator, no direct impact.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* necessary fixes after commit 11bd67db where ipi interrupt is used
to notify other cores to do a thread switch if necessary
* then for arc, it's needed to ignore swap_ok and check whether thread
switch is needed in the exit of irq handling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
dyn_reg_info has MPU_DYNAMIC_REGION_AREAS_NUM elements, just changing
the if check to be greater equal to this number to avoid access
MPU_DYNAMIC_REGION_AREAS_NUM element causing an out-of-bounds write.
CID: 205648
Fixes#20487
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are not part of the generic kernel to
architecture interface, rename appropriately to
reflect they are ARC-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Existed already in commit 8ddf82cf70 ("First commit"). Has never been
used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define FP_FPU_DA in arch/arc/Kconfig to make it always available. That
way, the Kconfig.defconfig definitions can skip the type, making them
incomplete if the base definition of the symbol disappears. That makes
the organization easier to understand and errors easier to spot.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define CPU_EM4* and CPU_EM6 in arch/arc/Kconfig to make them always
available. That way, the Kconfig.defconfig definitions can skip the
type, making them incomplete if the base definition of the symbol
disappears. That makes the organization easier to understand and errors
easier to spot.
The help texts were taken from
https://gcc.gnu.org/onlinedocs/gcc/ARC-Options.html. Help texts for
invisible symbols can be checked in the menuconfig too if you go into
show-all mode, so they're better than adding a comment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
"brk" is a break-point instruction which among other things
halts ARC core. As compared to pure halt (which is "flag 1" for ARC)
it is much more convenient as it might be executed from either
secure mode or normal mode (with SecureShield enabled), while "flag"
instruction will raise privilege violation exception if SecureShield
is enabled and we're in "normal" mode.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* implement DIRECT IRQ support both for normal irq and fast irq.
* add separate interrupt stack for fast irq and use CONFIG_ARC_
_FIRQ_STACK to control it. This will bring shortest interrupt
latency for fast irq.
* note that scheduing in DIRECT IRQ is not supported.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
after recent changes in zephyr's fault handling, e.g. use log
to repace printk, it requires more stack to exception handling, or
the stack overflow may happen and crash the system.
this commit adds a kconfig option for exception stack size with
a larger default size.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* the old codes may not save the caller saved regs correctly,
e.g. r7- r12. Because the sys call entry is called in the form
of static inline function. The compiler optimizations may not save
all the caller saved regs.
* new codes use the irq stack frame as the sys call frame and gurantee
all the called saved regs are pushed and popped correctly.
* the side effect of new codes are more stack operations and a little
overhead.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This makes it clearer that this is an API that is expected
to be implemented at the architecture level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main and idle threads, and their associated stacks,
were being referenced in various parts of the kernel
with no central definition. Expose these in kernel_internal.h
and namespace with z_ appropriately.
The main and idle threads were being defined statically,
with another variable exposed to contain their pointer
value. This wastes a bit of memory and isn't accessible
to user threads anyway, just expose the actual thread
objects.
Redundance MAIN_STACK_SIZE and IDLE_STACK_SIZE defines
in init.c removed, just use the Kconfigs they derive
from.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface and
has been renamed z_arch_kernel_init().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and is appropriately renamed z_arch_is_in_isr().
References from test cases changed to k_is_in_isr().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of the core kernel -> architecture interface
and should have a leading prefix z_arch_.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* In ARC, pop reg ==> sp=sp-4; *sp= b; The original codes have bug that
the save of ilink (st ilink [sp]) will crash the interruptted stack's
content. This commit fixes this bug and makes the codes easier to
understand
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
The code in question is very non-trivial so without good explanation
it takes a lot of time to realize what's done there and why
it still works in the end.
Here I'm trying to save a couple of man-days for the next developers
who's going to touch that piece of code.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
commit 780324b8ed ("cleanup: rename fiber/task -> thread")
seems to be done by a script and in that particular case turned
menaingful sentence into nonsense. Alas, threads might be in all
four states.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anas Nashif <anas.nashif@intel.com>
We manage IRQs in a quite a different way now since
commit f8d061faf7 ("arch: arc: add nested interrupt support")
so that comment not only makes no sense but also may fool a reader
as disabling of interrupts happens in the very beginning of
_rirq_exit() but not here.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
we should not rely on that eret has a copy of ilink in fast
irq handling. This will cause crash for hs cores.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For the old codes, if nest interrupts come out after _isr_wrapper
and before _check_nest_int_by_irq_act, then multi-bits in irq_act
will be set, this will result irq stack will not be switched in
correctly
As a fix, it's still need to use nest interrupt counter to do
interrupt stack switch as before
The difference is in the past exc_nest_count is used, but here
_kernel.nested/_kernel.cpus[cpu_id].nested is used.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* in arc secureshield interrupts can be configured
as secure or normal
* in sw design, high interrupt priorites are allocated to
secure world, low priorities are allocated to normal world.
* secure interrupt > secure thread > normal interrupt > normal
thead
So, here secure world/firmware only checks secure interrupt
priorities
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
it's not allowed to switch to thread preempted by exception as
its context is not saved.
So if a thread switch is required in exception handling, e.g.
kill a thread, the old thread cannot be switched back
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
For arc processor equiped with secureshield, SEC_STAT.IRM
bit should be recorded, it determins which mode irq should
return
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
according to high-level design,in user mode software-triggered system
fatal exceptions only allow oops and stack check failure
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
exception, different with irq offload, may be raised interrupt
handling, e.g.
* z_check_stack_sentinel
* wrong code
we need to add specific handling of this case in exception handling
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Ulf Magnusson