Add support for getting some basic params from the DTS for the UART.
The ns16550 driver still needs to be updated to get IRQ and address
info from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that all ARC SoCs we can remove code associated with !HAS_DTS and
select HAS_DTS at the architecture level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add initial device tree support for the em{7,9,11}d SoC and associated
em_starterkit boards. The device tree at this point specifies cpu core,
memory, interrupt controller, uart's and i2c controllers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that dts i2 qmsi ss nodes generate the right options, let's use
them. Apply the relevant fixup on the targeted SoC.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The DCCM_SIZE is defined in terms of K, not bytes, so we need to adjust
it from bytes (generated from dts) to K (used by e CONFIG_DCCM_SIZE).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* the bug comes out when a context switch happens in interrupt
* the bug only affects the em7d in emsk 2.3
* the bug is caused by
* wrong operations of stack
* wrong setting of SEC_STAT's IRM bit
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Move common SoC dts.fixup defines into
arch/arc/soc/quark_se_c1000_ss/dts.fixup so we remove duplication in the
boards and only have board specific defines in
boards/arc/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The new thread stack layout is as follow:
|---------------------|
| user stack |
|---------------------|
| stack guard (opt.) |
|---------------------|
| privilege stack |
-----------------------
For MPUv2
* user stack is aligned to the power of 2 of user stack size
* the stack guard is 2048 bytes
* the default size of privileg stack is 256 bytes.
For user thread, the following MPU regions are needded
* one region for user stack, no need of stack guard for user stack
* one region for stack guard when stack guard is enbaled
* regions for memory domain.
For kernel thread, the stack guard region will be at the top, adn
The user stack and privilege stack will be merged.
MPUv3 is the same as V2's layout, except no need of power of 2
alignment.
* reimplement the user mode enter function. Now it's possible for
kernel thread to drop privileg to user thread.
* add a separate entry for user thread
* bug fixes in the cleanup of regs when go to user mode
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
when USERSPACE is enabled, exception is handled in the privilege
stack of thread. This make thread context switch is possible in the
exception handler. For some case,e.g. tests, this is useful.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
disable the U bit of irq.ctrl, so the user thread's context will
be saved into privilege stack when interrupts/exception come.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
scrub all the regs of kernel context before returnning to userspace.
For sys call, ro is not cleared as it's a return value of sys call.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Enable us bit to check user mode more efficienly.
US is read as zero in user mode. This will allow use mode sleep
instructions, and it enables a form of denial-of-service attack
by putting the processor in sleep mode, but since interrupt
level/mask can't be set from user space that's not worse than
executing a loop without yielding.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* user space support requires THREAD_INFO
* for MPU version 2, the stack align is at least 2048 bytes
* the smallest mpu region is 2048 bytes
* the region size must bt power of 2
* the start address of region must be aligned to the region size
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* add the implementation of syscall
* based on 'trap_s' intruction, id = 3
* add the privilege stack
* the privilege stack is allocted with thread stack
* for the kernel thread, the privilege stack is also a
part of thread stack, the start of stack can be configured
as stack guard
* for the user thread, no stack guard, when the user stack is
overflow, it will fall into kernel memory area which requires
kernel privilege, privilege violation will be raised
* modify the linker template and add MPU_ADDR_ALIGN
* add user space corresponding codes in mpu
* the user sp aux reg will be part of thread context
* When user thread is interruptted for the 1st time, the context is
saved in user stack (U bit of IRQ_CTLR is set to 1). When nest
interrupt comes, the context is saved in thread's privilege stack
* the arc_mpu_regions.c is moved to board folder, as it's board
specific
* the above codes have been tested through tests/kernel/mem_protect/
userspace for MPU version 2
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Rename the nano_internal.h to kernel_internal.h and modify the
header file name accordingly wherever it is used.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Refering the ARM's implementation, the initial support of memory
domain in ARC is added:
* changes in MPU drivers
* changes in Kconfig
* codes to configure memory domain during thread swap
* changes in linker script template
* memory domain related macro definitions
the commited codes are simply tested through
samples/mpu/mem_domain_apis_test.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
MPU version 3 is included in em7d of em_starterkit 2.3.
The differences of MPU version 3 and version 2 are:
* different aux reg interface
* The address alignment requirement is 32 bytes
* supports secure mode
* supports SID (option)
* does not support memory region overlap
This commit adds the support MPU version 3 and also make some changes to
MPU version 2 to have an unified interface.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* em7d of em_starterkit 2.3 supports secure mode. add the support
in kconfig and build system.
* change the default configuration of em_starterkit 2.3 to em7d
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In ARC's SecureShield, a new secure mode (currently only em) is added.
The secure/normal mode is orthogonal to kernel/user mode. The
differences between secure mode and normal mode are following:
* different irq stack frame. so need to change the definition of
_irq_stack_frame, assembly code.
* new aux regs, e.g, secure status(SEC_STAT), secure vector base
(VECT_BASE_S)
* interrupts and exceptions, secure mode has its own vector base;
interrupt can be configured as secure or normal through the
interrupt priority aux reg.
* secure timers. Two secure timers (secure timer 0 and timer 1) are
added.Here, for simplicity and backwards compatibility original
internal timers (timer 0 and timer1) are used as sys clock of zephyr
* on reset, the processor is in secure mode and secure vector base is
used.
Note: the mix of secure and normal mode is not supported, i.e. it's
assumed that the processor is always in secure mode.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Add FIRQ option and change the _isr_wrapper. Currently, firq is
enabled by default, but in some arc configuration, firq can be
disabled.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
When CONFIG_X86_MMU is enabled for arduino 101 the start address
should be aligned to 4kB. If not aligned the page tables would not
be created and the build fails.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Some "random" drivers are not drivers at all: they just implement the
function `sys_rand32_get()`. Move those to a random subsystem in
preparation for a reorganization.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Currently this is defined as a k_thread_stack_t pointer.
However this isn't correct, stacks are defined as arrays. Extern
references to k_thread_stack_t doesn't work properly as the compiler
treats it as a pointer to the stack array and not the array itself.
Declaring as an unsized array of k_thread_stack_t doesn't work
well either. The least amount of confusion is to leave out the
pointer/array status completely, use pointers for function prototypes,
and define K_THREAD_STACK_EXTERN() to properly create an extern
reference.
The definitions for all functions and struct that use
k_thread_stack_t need to be updated, but code that uses them should
be unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In various places, a private _thread_entry_t, or the full prototype
were being used. Be consistent and use the same typedef everywhere.
Signen-off-by: Andrew Boie <andrew.p.boie@intel.com>
Indenting preprocessor directives reduces the code readability, because
it make preprocessor directives harder to spot.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tomasz Bursztyka